PDA

View Full Version : Looking for High Quality 737 Collins MCP Drawings or Model



KB1RCC
07-07-2014, 05:58 PM
Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

9327

Thanks,

Jeff

Henju
03-29-2015, 06:12 AM
Hello,
If you are still looking for drawings, I can give you my 737CL SKP files which includes some of the Sperry SP-300 MCP, not sure if it is of the same style but you can decide.

Henri

KB1RCC
03-30-2015, 12:35 AM
That would be a great help!

Here is my email scannorfolk@gmail.com

m0ng00se
04-25-2015, 10:07 AM
Jeff ..

What I sometimes do is find a photo of the real deal. I know what the dimensions should be, 470mm wide give or take if I am not mistaken. Then I import it into Autocad with the correct scale and trace it. Afterwards you end up with a nice Autocad drawing for an MCP :)

KB1RCC
04-25-2015, 11:26 AM
I had actually considered doing this a couple of weeks ago. I actually found some good drawings of everything so I should be all set.

Thanks!

fanis
04-25-2016, 08:21 AM
Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

9327

Thanks,

Jeff

Could you shear whith me your drawing?

Henju
04-25-2016, 07:25 PM
Could you shear whith me your drawing?
Hi,
I have some updated drawings of the MCP in vector format, but it's only the Sperry 300 model, which was commonly fitted to the Classics, maybe you could modify them to suit?

Anyways, here is my Google Drive link,
https://drive.google.com/open?id=0ByNTmu6mHPl1S0R3YlU5ek5yY3c

Henri

Henju
04-25-2016, 07:36 PM
I Also forgot to add I had made a relatively to scale overhead panel as well, let me know if you're interested
http://www.mycockpit.org/forums/attachment.php?attachmentid=11480&stc=1

Henri

fanis
04-26-2016, 02:28 AM
I Also forgot to add I had made a relatively to scale overhead panel as well, let me know if you're interested
http://www.mycockpit.org/forums/attachment.php?attachmentid=11480&stc=1

Henri
Yes i am interested....is very good project...thank you very much .

fanis
04-26-2016, 02:32 AM
Henri do you have something else like pedestal?

Henju
04-26-2016, 05:13 AM
Henri do you have something else like pedestal?
Sorry, unfortunately not, only the classic MIP from the -200's. May I ask which 737 you're building? Most of the info I have sourced and created comes from the Classic, specifically the Non-EFIS version.

Anyhow, here is the link to the Overhead, be cautioned it slows down the PC when viewing it due to all the vector lines.



Henri

fanis
04-26-2016, 10:30 AM
i would like to make 737 ng and the classic is not bad...

jan789
09-22-2016, 11:05 AM
Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

Thanks,

Jeff

Hello sir, did you find somwhere drawings of Collins MCP? Thank you in advance.

paulnd
09-23-2016, 08:38 AM
free drawings in dxf and Corel formats are available here

http://opensourcecockpit.eu/product/737-mcp-panel-collins/

jan789
09-26-2016, 06:02 AM
Thank you so much, very useful page :)