New Boeing 737 MIP and Overhead from CockpitSimParts

[Bassam45]

Hi Everyone,
here is a few newly products from CockpitSimParts,

8293 8294 8295 8298 8297 8299
8300

i would like to hear your opinion about them, if you could let me know what you think about the product and most importantly the prices !!

many thanks
Sam.

[tiburon]

Don't like the fastening screws of the panels and the fact that all overhead panels are the same color.
For the rest, great panels

[Bassam45]

Hi Tiburon,
thank you for your comments, we are still under development stage and as you know the overhead is not released yet, we will bring out 2 versions of the overhead, full grey one and the normal Grey and white, prices will be extremely lower than the market prices and that's for sure.. :)

any more comments are welcome and much appreciated as it does help us to improve our product and make them better for us and everyone .

many thanks guys

Sam.

[tiburon]

Ok, great ! Will you be making pedestal panels as well ?

[Bassam45]

its definitely on the list, but as you know those things do take time to cook nicely ! :) so we looking about a month or two at the latest.

[tiburon]

Great. One more question : what is the thickness off your panels ?

[Bassam45]

front and back panels are 3mm each, so that's 6mm in total. any thing else just let me know. thanks

[Bassam45]

Here are some new pictures of an updated Boeing 737 overhead panel, still not released yet and its still under development, will keep updating you with the progress.

if you have any question please let me know.

8372 8373 8374 8375 8376 8376

[raymondvanderploeg]

Hi Sam,


I am very surprised by the quality of the panels. But when I took a closer look on the overhead panel I see that it is not that accurate as Flyengravity for example:


- Looks like the font needs bigger or the font itselve is not right. example the word ENGINE START is on the FE and the real panel more to the left.
- The placing of switches etc is not good, for example the R WIPER knop is right above the left starter switch. But when comparing with th real panel the R WIPER must be between the left starter and both L R starter switch.
- Also on the real and FE panel i see the taxi light just left of the L wiper switch, but on your panel it is exact underneath the switch.


Why is that?


Regards,
Raymond


PS: I used this picture for the real aircraft OH: http://www.airliners.net/photo/Gol-Linhas-Aereas/Boeing-737-8EH/2223812/L/&sid=104bf5427e7f921287d77c030a8697c3

[tiburon]

Also, you made a little panel for the ground power, in reality this is just a black sticker.

[Bassam45]

hi, thank you guys for all your comments, i really do appreciate all those information, i have to say, for someone to compare my overhead with a real one to that level of details is an achievement for me, as you can see from the overhead pictures above, we have added few more details to it such as the ground power and the 2 index to lock singes, we have made them of plastic and laser engraved them instead of using stickers, guys you have got to remember, this panel is still under development and as i progress with it thing will get better and better, one thing to remember though, every manufacture has its own design and quality, as i always say there are no 2 the same overhead made by 2 different companies!

take a look at the best overhead available in the market and compare it with the real one, i guarantee you will spot alot of differences and that's the way it goes,the reality of it is that no one can or will make a real overhead panel, we could only look around for the best we can find without braking the bank !

Few companies has come up with close ones but for what they are asking i would rather buy a Car and keep the change !! :)


many thanks guys and expect new updates and more product form us (without braking the bank)

Sam.
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

[raymondvanderploeg]

Hi Sam,

Sorry for the criticism, but it's just the things I discovered and perhaps you can modify them since I think it's a nice product you are making!

Regards,
Raymond

[Bassam45]

Hi Raymond, no hard feelings mate, i do a appreciate all your comments in fact am working now as we speak to modify few parts and hopefully i will be done with it by the end of the day or the latest tomorrow.

i would like to get your opinion though if you don't mind ones im done with it.

many thanks for brining those notes to my attention.

Sam.

[raymondvanderploeg]

really looking forward! since I am looking for this kind of OH solution.

regards,
Raymond

[Bassam45]

Hi Raymond, i have made few changes to the overhead, have a look at this video and let me know what you think


http://www.youtube.com/watch?v=4cVUjBWTZCQ&feature=c4-overview&list=UU6U27Q3lUt99KhW6k2jzB5A


i look forward to hear from you.

thanks
Sam

[raymondvanderploeg]

Sam,

Why making a video from a real overhead panel? :D hihi it's looking great with the changes you have made concerning the comments!

Big compliments!

Regards,
Raymond

[Bassam45]

Hi Raymond,
many thanks for your help mate, i have finally released the overhead for sale on my website, here is more picture of it.

8429 8430 8431 8432

next on my list to make is the after overhead, ill keep you updated.

thanks
Sam.

[tiburon]

Hi, one little criticism : the blue annunciators are not actually blue, the light behind it is.

[Bassam45]

Hi Tiburon,
that is correct, they LEDs are Blue and not the Annunciators, the customers will be supplied with both annunciators, normal ones and blue ones, this way, they can chose what to use.

i just think the blue annunciators add more to the look of the overhead.

many thanks for your input.

regards
Sam.
8436 8437

[wiganpilotsteve]

Hiya Bassam45, I have just ordered the Captains side MIP from yourselves and also the Saitek throttle lever set. I hadn't seen this thread before hand and just saying Hello, look forward to receiving my goodies in a few weeks.

[Bassam45]

Hi Steven,
many thanks for your order mate, i will do my best to get it out as soon as possible, in the meantime, if you need any help at all please let me know.

regards
Sam.

[wiganpilotsteve]

No problem, cheers.

[Bassam45]

Small update, We have changed the fasteners on the MIP, We have colour coded ones now along with counter sunk ones where possible. We think this makes the overall MIP much nicer than having the stainless steel ones that stuck out a lot.

http://i429.photobucket.com/albums/qq20/speced/hmm/4_zpsce0017fa.png (http://s429.photobucket.com/user/speced/media/hmm/4_zpsce0017fa.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/5_zpsec2433af.png (http://s429.photobucket.com/user/speced/media/hmm/5_zpsec2433af.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/11_zps73e25caf.png (http://s429.photobucket.com/user/speced/media/hmm/11_zps73e25caf.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/3_zps644f74ce.png (http://s429.photobucket.com/user/speced/media/hmm/3_zps644f74ce.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/2_zps08ad4e12.png (http://s429.photobucket.com/user/speced/media/hmm/2_zps08ad4e12.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/7_zps878eb22c.png (http://s429.photobucket.com/user/speced/media/hmm/7_zps878eb22c.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/10_zpsb60ecee1.png (http://s429.photobucket.com/user/speced/media/hmm/10_zpsb60ecee1.png.html)

[No Longer Active]

I think that what you are doing here is such a positive step forward for those that want professional looking parts at great prices in the UK without having to pay the heftier prices by the bigger companies that only think about their pockets and money all the time. Time is expensive and I hope you are rewarded for the time and effort you have put in to your sim hobby business and it will only get bigger as people spread the word (like on here/youtube). You definitely have the edge over many other companies not just because of your excellent panels and prices but for your 737 saitek throttle parts that no one else seems to do in the UK and the fact that you don't charge much for them. You will not be beaten by price, I will promise you that. Keep up the good work!

[Bassam45]

I think that what you are doing here is such a positive step forward for those that want professional looking parts at great prices in the UK without having to pay the heftier prices by the bigger companies that only think about their pockets and money all the time. Time is expensive and I hope you are rewarded for the time and effort you have put in to your sim hobby business and it will only get bigger as people spread the word (like on here/youtube). You definitely have the edge over many other companies not just because of your excellent panels and prices but for your 737 saitek throttle parts that no one else seems to do in the UK and the fact that you don't charge much for them. You will not be beaten by price, I will promise you that. Keep up the good work!


Thank you. That's exactly the direction we want to go. Great quality yet great affordability, It's such an expensive hobby and not everyone has the deep pockets to shell out a few grand on a complete overhead panel etc.

As to the saitek throttles I've yet to find another person doing them. We are currently working on the CH throttles at the moment. We have samples sent out to customers that are using CH once we have the correct fitment these will go into the production which will be exciting stuff!

Thanks for the positive feed back we really appreciate it! At least we know we are going in the correct direct!

[tinker27]

Brilliant stuff , since i bought my last few goodies from you im now saving for the overhead might get you to make it for me tho , also do you have any plans to do a throttle too , i mean you got the handles sorted already , as everyones selling them very expensive this and your battle plan could be a seller .

regards Neil

[Bassam45]

Brilliant stuff , since i bought my last few goodies from you im now saving for the overhead might get you to make it for me tho , also do you have any plans to do a throttle too , i mean you got the handles sorted already , as everyones selling them very expensive this and your battle plan could be a seller .


regards Neil

Hey, Great stuff, I'm happy that we have satisfied you enough to keep coming back, That means we are on the right tracks with customer service and great quality products. With regards to the throttles yes that is one of our goals, We are aiming to end up with making and selling everything that's needed for a complete cockpit.

Also here's a few pictures of what we can do at the moment.
Please note we have done an update of the white panels of the overhead, We have made the lines thicker, Will get some fresh shots of those up later on today.

http://i429.photobucket.com/albums/qq20/speced/hmm/6_zpsa2782c3c.png (http://s429.photobucket.com/user/speced/media/hmm/6_zpsa2782c3c.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/1_zpse0a3fe04.png (http://s429.photobucket.com/user/speced/media/hmm/1_zpse0a3fe04.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/2_zps19713d04.png (http://s429.photobucket.com/user/speced/media/hmm/2_zps19713d04.png.html)


We also sell annunciator sets separately to the panels.
http://i429.photobucket.com/albums/qq20/speced/hmm/standbypwr_zps0216eba8.png (http://s429.photobucket.com/user/speced/media/hmm/standbypwr_zps0216eba8.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/airtemp_zpsb1d84f6b.png (http://s429.photobucket.com/user/speced/media/hmm/airtemp_zpsb1d84f6b.png.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/fullset_zpsf3e1db01.jpg (http://s429.photobucket.com/user/speced/media/hmm/fullset_zpsf3e1db01.jpg.html)

Here's a few shots of our light edition handles, We also have a pro edition with the fake reversals. I shall get some shots of the pros at a later date or can simply check them out on our website.

http://i429.photobucket.com/albums/qq20/speced/hmm/white3_zpsf6d873f7.jpg (http://s429.photobucket.com/user/speced/media/hmm/white3_zpsf6d873f7.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/grey1_zpsc9c2a885.jpg (http://s429.photobucket.com/user/speced/media/hmm/grey1_zpsc9c2a885.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/grey5_zps5d172d7f.jpg (http://s429.photobucket.com/user/speced/media/hmm/grey5_zps5d172d7f.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/grey2_zpsa6a133f5.jpg (http://s429.photobucket.com/user/speced/media/hmm/grey2_zpsa6a133f5.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/grey3_zps117f05e1.jpg (http://s429.photobucket.com/user/speced/media/hmm/grey3_zps117f05e1.jpg.html)

[mariodantas]

Sam you're the best, I bought a MIP today from your website, cheers. Mario from France

[Bassam45]

Sam you're the best, I bought a MIP today from your website, cheers. Mario from France



Great stuff, There's two MIP orders in front of you, The one is 90% complete, Then once that other one is out of the way we will be cracking on with yours! Thanks for the order.

Here's a picture of one of the MIP orders that is 90% complete!

Kind Regards,
Jeordan.

http://i429.photobucket.com/albums/qq20/speced/hmm/photo35_zps36a12c38.jpg (http://s429.photobucket.com/user/speced/media/hmm/photo35_zps36a12c38.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/photo25_zpscf1d2820.jpg (http://s429.photobucket.com/user/speced/media/hmm/photo25_zpscf1d2820.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/hmm/photo15_zps492b10bb.jpg (http://s429.photobucket.com/user/speced/media/hmm/photo15_zps492b10bb.jpg.html)

[mariodantas]

Looks very good I'm happy with the order really

[Bassam45]

Looks very good I'm happy with the order really

Thank you Mariodantas!!

Also

Just to let some people know that we are currently swapping units over the weekend so if people place and order there maybe a slight delay.


Sorry for an inconvenience!


Kind Regards,
Jeordan

[mariodantas]

Jeordan ?, what does it means ?

[Infinity]

[QUOTE=Bassam45;144761]Hi Tiburon,
that is correct, they LEDs are Blue and not the Annunciators, the customers will be supplied with both annunciators, normal ones and blue ones, this way, they can chose what to use.

i just think the blue annunciators add more to the look of the overhead.

many thanks for your input.

regards

Sam.
8436 8437[/QUOTE

Deleted

[Bassam45]

All moved into new premises, All back up and running guys!

[mariodantas]

Yesssssss good news

[Bassam45]

Another overhead v2 packaged up ready to be shipped, Wonder if the owner of it is a part of this forum :D Have a good day all!!

http://i429.photobucket.com/albums/qq20/speced/photo14_zps5022fd5a.jpg (http://s429.photobucket.com/user/speced/media/photo14_zps5022fd5a.jpg.html)

[mariodantas]

Yes that's cool and some news for me ? my mip ?

[Cockpitsimparts]

Yes that's cool and some news for me ? my mip ?


Your's is the next one, I've cut out the frame work etc for yours, Painting and lasering and be packed up! I'll post yours up once it's being packed it you like!

Thanks
Jeordan

[mariodantas]

Yep I'd like, no doubt, thanks

[claushansen]

I was one of the lucky customers this week and got my full MIP :)

It's very high quality !!

8728

8729

Regards

Claus

[mariodantas]

I'm also waiting for mine ASAP, tired of waiting. Yours is perfect.

[Cockpitsimparts]

I was one of the lucky customers this week and got my full MIP :)

It's very high quality !!

8728

8729

Regards

Claus

Awesome stuff! glad it arrived all well and secure! I'm really glad that you are happy with it!

Kind regards,
Jeordan

[Cockpitsimparts]

I'm also waiting for mine ASAP, tired of waiting. Yours is perfect.

Check your status update ;) It has been collected this morning and is on it's way to you!

[mariodantas]

Oh yeahhhhh, thanks mate I saw that you sent me the tracking number this morning. I'll take photos to post here upon received

[Cockpitsimparts]

Oh yeahhhhh, thanks mate I saw that you sent me the tracking number this morning. I'll take photos to post here upon received

Awesome, Thank you very much, Also thanks for waiting!

[Cockpitsimparts]

If our panel overheads are a little out of your price range how about our printed overhead panels?


Our printed overhead panels are a tough durable print on top of a white 5mm thick plastic sheet. Can be easily cleaned too.


We have different versions from all switches being installed and knobs all the way to no knobs or switches.


http://i429.photobucket.com/albums/qq20/speced/printed_zpsb3c4bcec.jpg (http://s429.photobucket.com/user/speced/media/printed_zpsb3c4bcec.jpg.html)

[mariodantas]

8864
This are from cockpitsimparts

[Cockpitsimparts]

8864
This are from cockpitsimparts


That looks awesome mate, Great progress, Look forward to seeing the complete product now mate!

[mariodantas]

8881

First b acklit attempt with white leds behind the first panel

[Cockpitsimparts]

8881

First b acklit attempt with white leds behind the first panel


That looks amazing Mario, We haven't had anyone send us pictures of it backlit yet but that looks awesome, Great work!

[mariodantas]

Thanks buddy, little suggestion for further custmers, put all screws like AFDS screws 2cm long, will keep uploading photos as the project takes its shape

[Cockpitsimparts]

Thanks buddy, little suggestion for further custmers, put all screws like AFDS screws 2cm long, will keep uploading photos as the project takes its shape

Thank you Marios, I will take that on board and look into the screw lengths, Do you have anymore pictures of the MIP etc? Love the shots of it in the dark with the lights up and running? Also if it's ok I would like to use the back lighting one to show people what it looks like lite up?

[Cockpitsimparts]

Also...
Got a bit of an update for people, We are currently working on fully working gauges for the overhead and mips.


These just need the final touches and will then be on sale on our website.


http://i429.photobucket.com/albums/qq20/speced/hmm/photo16_zps42e6dede.jpg (http://s429.photobucket.com/user/speced/media/hmm/photo16_zps42e6dede.jpg.html)

[mariodantas]

I will buy no doubt

[Cockpitsimparts]

I will buy no doubt


Awesome stuff, Not long now, Just the final little touches and they will then be on our website. I'll let you know Mario when they are!

Jeordan

[mariodantas]

Thanks sam

[Cockpitsimparts]

At the warehouse we have been working on our V3 overhead, It's going to be made from 5mm materials for that extra added realistic feel. Also we are thinking about a 1 piece backing panel either made from 3mm or 5mm we are not 100% sure yet.

Take a look at these pictures are let us know what you think? We are also building our new cockpit in our warehouse which is really exciting and we are going to be using all Cockpitsimpart parts!

http://i429.photobucket.com/albums/qq20/speced/overhead/photo27_zpsa843dc25.jpg (http://s429.photobucket.com/user/speced/media/overhead/photo27_zpsa843dc25.jpg.html)

http://i429.photobucket.com/albums/qq20/speced/overhead/photo17_zps6226fadf.jpg (http://s429.photobucket.com/user/speced/media/overhead/photo17_zps6226fadf.jpg.html)

[mariodantas]

Glorious product

[Cockpitsimparts]

Glorious product


Thanks Mario, It's defiantly a fantastic quality product, This and the fully working gauges will be out within a few days so keep your eyes on the site guys!

Here's a quick shot of our cockpit at the moment :D Started it yesterday.
http://i429.photobucket.com/albums/qq20/speced/photo4_zps0823ec6c.jpg (http://s429.photobucket.com/user/speced/media/photo4_zps0823ec6c.jpg.html)

[tiburon]

Great ! The extra thickness gives it a much more realistic look.
The CVR though is only an alu plate so it's not as thick as the other panels.

[Cockpitsimparts]

Great ! The extra thickness gives it a much more realistic look.
The CVR though is only an alu plate so it's not as thick as the other panels.


Yeah diffidently a more professional look to it! Thanks for that we shall see what it's like with the CVR panel being thinner!

[Cockpitsimparts]

Update.
We have released the Boeing 737 v3 overhead. This overhead has the thicker more durable plastic. Backing plates are 3mm and the front panels are now 5mm thick giving it that WOW factor!

We currently have 1 in stock ready for dispatch straight away! £399 BARGAN!

Take a look for yourselves here;
http://www.cockpitsimparts.co.uk/product.php?id_product=138


Jeordan.

[tinker27]

HOW LONG BEFORE GAUGES READY ? AND HOW MUCH ?

REGARDS

NEIL

[Asifillyas]

Hello all,

I have the MIP and the overhead and have to say that they are top notch!! Thank you, Sam and Cockpit Simparts!!!
One fledgling question --- is there a link to a thread on wiring it anywhere ( specifically to a BU0836X ) -- Is that card sufficient? or does one need something more ? I have basic electric skills but need some guidance on wiring and how they connect to the card -- and how to make the LED's respond to alerts etc from the sim ( I use X-Plane 10 but also have FSX to switch to if need be for 737 compatibility, etc. )

Thanks in advance !

Asif



If anyone could point me to a thread I'd so appreciate it!!

[tiburon]

The Bodnar card has 32 inputs for switches so no, one card is not sufficient. I have connected every switch and needed 4 Bodnar cards. Connecting is dead easy : for every switch connect one pole to gnd (Ground) and the other to a numbered input, ie nr. 1. If the switch has more poles connect the middle to gnd and one pole to a input and the second to another input (so you don't use the ground for that input). Rotary switches connect in the same way.
For leds you will have to use an output card, for example the Phidgets led 64 advanced.
If you want to make the leds and switches behave in an airplan-like fashion you additionally need a program that interfaces your input and output cards with your airplane.

Hope that helps

Martin

[Asifillyas]

The Bodnar card has 32 inputs for switches so no, one card is not sufficient. I have connected every switch and needed 4 Bodnar cards. Connecting is dead easy : for every switch connect one pole to gnd (Ground) and the other to a numbered input, ie nr. 1. If the switch has more poles connect the middle to gnd and one pole to a input and the second to another input (so you don't use the ground for that input). Rotary switches connect in the same way.
For leds you will have to use an output card, for example the Phidgets led 64 advanced.
If you want to make the leds and switches behave in an airplan-like fashion you additionally need a program that interfaces your input and output cards with your airplane.

Hope that helps

Martin

Martin!

That helps immensely!! Thanks so much! I may be back for more questions...but, for now, I can get it going... cheers!!

Asif

[mariodantas]

Waiting for the new gauges from cockpitsimparts, Sam give us a taste please....

[wiganpilotsteve]

Hello all, I have been away for a while and had the time to come on here. Good to be back though and Sam, I was very impressed with the quality of the MIP I purchased from you. I also bought the throttle quadrant levers and I remember asking if the decals came with them, to which you said yes. I was meaning the flaps decal and was a little disappointed when it was not included. All in all, good quality levers, cheers. I have just ordered a full set of TQ decals from a sim builders website, so all is good. Keep up the good work.

[mariodantas]

This Google sheet mai interest somebody, take a look and drop your ideas or some new offsets

https://docs.google.com/spreadsheets/d/10QkGfUfw3KxBw6GPq6zvX04i8gdkWt5jfAJ8Oxq1Tw0/edit?usp=sharing

[tiburon]

Hello all, I have been away for a while and had the time to come on here. Good to be back though and Sam, I was very impressed with the quality of the MIP I purchased from you. I also bought the throttle quadrant levers and I remember asking if the decals came with them, to which you said yes. I was meaning the flaps decal and was a little disappointed when it was not included. All in all, good quality levers, cheers. I have just ordered a full set of TQ decals from a sim builders website, so all is good. Keep up the good work.

Please tell me you didn't order them from Fabio...

[wiganpilotsteve]

Please tell me you didn't order them from Fabio...

Ouch! I did actually. Not a good move?

[wiganpilotsteve]

The only thing I have found so far to be an issue, was that I ordered a full set of annunciators that are ready built with LED'S and circuit board, some of the single units needed a very small amount of packing to fit snug, and the landing Gear annunciators were all on a fixed board and won't fit in the plate because the holes don't line up.

@ Bassam45

[tiburon]

Well...some of his decals are exactly the same as the ones on Rudy's site, which are of course freely downloadable.
I'm not accusing anybody but take a look here : http://www.737ngproject.be/liens.htm
The Aviation Megastore in my country is selling these decals as well which is a bad thing IMO.

[wiganpilotsteve]

Ah right! He did state that they were properly finished though, which I suppose would save me the bother of printing on special paper with adhesive backing and cutting everything out.

[Cockpitsimparts]

Sorry I have been inactive, It's been very busy here lately, But we have however had time to design the After Overhead to match our Overhead. It's due to be released today or tomorrow so keep your eyes peeled ;)

Take it easy and if there's any questions please just ask,

Jeordan.


http://i429.photobucket.com/albums/qq20/speced/overhead/aft1_zpsb119b876.jpg (http://s429.photobucket.com/user/speced/media/overhead/aft1_zpsb119b876.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/overhead/aft2_zpsb4a9ea03.jpg (http://s429.photobucket.com/user/speced/media/overhead/aft2_zpsb4a9ea03.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/overhead/aft3_zps14404fd2.jpg (http://s429.photobucket.com/user/speced/media/overhead/aft3_zps14404fd2.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/overhead/aft4_zps10e767d3.jpg (http://s429.photobucket.com/user/speced/media/overhead/aft4_zps10e767d3.jpg.html)

[mariodantas]

Really nice panels and good quality (I've one of your mips) and what about the mip complete servo gauges project ?

[Cockpitsimparts]

Really nice panels and good quality (I've one of your mips) and what about the mip complete servo gauges project ?

That you! We are still working on those, They are not straight forward, Most of them are completed there's a few we need further work with the gears and the amount of teeth each gear have to make it move the correct distance and return etc.

Jeordan

[Cockpitsimparts]

Great news people we have just released our After Overhead, There are currently two versions.

1.
Just the panels and backing panels. On offer for new release currently £199.
http://www.cockpitsimparts.co.uk/product.php?id_product=142

2.
Panels, Backing panels, Switches, Annunciators, LEDS and a set of DZUS screws for mounting. On offer for new release currently £249.
http://www.cockpitsimparts.co.uk/product.php?id_product=143

[wiganpilotsteve]

Great news people we have just released our After Overhead, There are currently two versions.

1.
Just the panels and backing panels. On offer for new release currently £199.
http://www.cockpitsimparts.co.uk/product.php?id_product=142

2.
Panels, Backing panels, Switches, Annunciators, LEDS and a set of DZUS screws for mounting. On offer for new release currently £249.
http://www.cockpitsimparts.co.uk/product.php?id_product=143
Have you revised the measurements of the landing gear annunciators?

[Cockpitsimparts]

Have you revised the measurements of the landing gear annunciators?


What do you mean Steve?

Jeordan

[wiganpilotsteve]

What do you mean Steve?

Jeordan

I posted about it above! I bought a ready built Landing Gear annunciator module and it won't fit the holes on the MIP

[Cockpitsimparts]

I posted about it above! I bought a ready built Landing Gear annunciator module and it won't fit the holes on the MIP

I'm sorry to hear that, Are both products from us?

Jeordan

[wiganpilotsteve]

I'm sorry to hear that, Are both products from us?

Jeordan

No, and I do appreciate that not everything is compatible. I thought though that annunciators would reflect the same dimensions as the real aircraft. The module that I bought came from Sismo, a complete unit, jus one of those tings I suppose.

[Cockpitsimparts]

No, and I do appreciate that not everything is compatible. I thought though that annunciators would reflect the same dimensions as the real aircraft. The module that I bought came from Sismo, a complete unit, jus one of those tings I suppose.


What size do you need them in, We might be able to make you a custom set.

[wiganpilotsteve]

What size do you need them in, We might be able to make you a custom set.
No need, I am hoping to be able to buy the actual Landing Gear lever soon, so that should come with the face plate. Thanks for the offer though. I have just tried to insert an image of the measurements but the box won't load on here so I can't.

[wiganpilotsteve]

Not sure if it has loaded, but here goes.

[Cockpitsimparts]

Ah I can see now as our LED boxes are 22.3mm x 9.5 at the base, Then open larger at the top at 25mm x 12mm to hold our annunciators that are 24.6mm x 11.5mm.

Regards,
Jeordan

[Cockpitsimparts]

Here's a little update on what we are currently working on ;)

Dummy FMC, self assembly kit & plug and play will be released very soon.

http://i429.photobucket.com/albums/qq20/speced/overhead/sneaky_zpscf917e17.jpg (http://s429.photobucket.com/user/speced/media/overhead/sneaky_zpscf917e17.jpg.html)

[No Longer Active]

Ever thought of making airbus parts?

[Bassam45]

Hi Alex,
i am thinking about it mate, but first i still got alot to bring out for the Boeing 737, so hopefully soon though.

here is a quick update of what im working on at the moment.

9209

More updates will follow on this forum.

thanks.
Sam.

[No Longer Active]

That's fair enough! The A320 market could pay dividends as not too many suppliers on the market!

All the best to ya, and great job on the FMC/MCDU!

[mariodantas]

a beautyfullCDU

[Cockpitsimparts]

a beautyfullCDU


Thank you, Shouldn't be too long now and we will release the dummy one and the full plug and play! So stay tuned people! :D

[mariodantas]

We stay tuned also for the MIP gauges with servos

[Cockpitsimparts]

We have just released the MIP kit, This is for those who wish to make their own frames etc but need everything else for the MIP, This kit plus our MIP switch kit is the perfect combination!

http://www.cockpitsimparts.co.uk/product.php?id_product=149

[tiburon]

Great, would you also make a kit for captain's side plus center section alone?

[tiburon]

Sorry, I've seen it.

[Cockpitsimparts]

Great, would you also make a kit for captain's side plus center section alone?

Yep we do one of those too!

Kind Regards,
Jeordan

[OmniAtlas]

That's fair enough! The A320 market could pay dividends as not too many suppliers on the market!

All the best to ya, and great job on the FMC/MCDU!

Yes, any plans to make A320 parts? cheers.

[Cockpitsimparts]

We have now finally released out FMC (dummy) We are still currently working on the electronics for the plug and play ones but I can announce that it won't be long at all.

We have a discount for the first few sold at a price of £95.

http://www.cockpitsimparts.co.uk/product.php?id_product=153

http://i429.photobucket.com/albums/qq20/speced/overhead/newrel_zpsaabe9064.jpg (http://s429.photobucket.com/user/speced/media/overhead/newrel_zpsaabe9064.jpg.html)

[Cockpitsimparts]

If people are following us on facebook you would know we are working on a fully working plug and play EFIS, Well it's nearlly here guys. Should be on our site Monday morning, Maybe even tomorrow.

[Cockpitsimparts]

Just in case people didn't know, We did finally release the fully plug and play EFIS panel. It's currently on release offer at £110 with the interface card or £80 without the interface card. We have had amazing feed back about this item and we are very pleased with it.
Here's the direct link to the sale:http://www.cockpitsimparts.co.uk/product.php?id_product=154
Few pictures
http://i429.photobucket.com/albums/qq20/speced/overhead/efis22_zps9c8bc242.jpg (http://s429.photobucket.com/user/speced/media/overhead/efis22_zps9c8bc242.jpg.html)
http://i429.photobucket.com/albums/qq20/speced/overhead/efis11_zps220cc12d.jpg (http://s429.photobucket.com/user/speced/media/overhead/efis11_zps220cc12d.jpg.html)

[jthiani]

looks awesome !!!!! Will y'all be making 787 parts anytime in the near future???

[gkkes]

The dummy FMC looks really smart Jeordan.
Is it delivered with backlighting?
i only ask as I see over at hispapanels that installing led's on their panel looks very tricky!

http://www.hispapanels.com/cabina737/paneles/pedestal/fmc/fmci.html (http://www.hispapanels.com/cabina737/paneles/pedestal/fmc/fmci.html)

I immediately thought it must be more sensible to buy a cheap illuminated keyboard for less than £10 online and modify it. Not only would each key have a light, but with a bit of though it may be possible to use the key switches and possibly remap the board.

What do you think?

Kev