[Support]Hercules C-130 Cockpit

[Abelgb]

Hello dears,

We started a project to make a flight sim cockpit of an Hercules L-100 C-130, we have a real cockpit cabin section!, it's already cleaned but with the original overhead(switches etc), Throttle, yoke, etc, we need all the possible suggestions to become it in a reality. 1st of all i think the hardest part is the overhead what cards can we use to get it working?, thank you all for your answers.

Throttle on!

[Avro748]

For inputs, I can suggest either one of these:
GP-WIZ 40ECO (http://groovygamegear.com/webstore/index.php?main_page=product_info&products_id=234)
BBI-32 (http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=86&products_id=206)
Both are also available with solder-less connectors, at a higher cost.

[blueskydriver]

I suggest Flightdecksolutions FDS Sys Cards. They're the easiest to work with and setting them up for FSUIPC offsets (or making your own) for the C130 would be a breeze. I have OpenCockpit Cards as well and they require the knowledge of SIOC. So, if you're a programmer, SIOC is great, but for getting in the air quicker, go with FDS...

Which Flight Model are you using would be the next question for yourself, as that'll play into which cards you get...

John

[Avro748]

I'm not sure how easy it will be to work with, but I would suggest the Captain Sim model. I don't think there are any other choices with at least half-decent flight dynamics and systems.

[Abelgb]

Thank you all for your support, this is the cockpit ready to work. The hardest part maybe will be the overhead, what do you suggest to make the cards switchers for the switchs and knobs, there are a little gauges for fuel but i think it will be inop.

P.D: Yes, we'll gonna work with the captain sim model.

http://imageshack.us/a/img542/2296/wlud.jpg

http://imageshack.us/a/img809/8708/9agw.jpg

http://imageshack.us/a/img853/7447/d4dz.jpg

http://imageshack.us/a/img594/7285/7bw1.jpg

[Abelgb]

Thank you all for your support, the cockpit is ready to work and i think the hardest part will be the overhead panel, what do you suggest for the overhead cards, i mean to get working and connected the switches and knobs, also the are fuel gauges but maybe it will be inop or there's any posibility to get it working?.

P.D: Yes, we think in captainsim model for the preject.

http://imageshack.us/a/img542/2296/wlud.jpg


http://imageshack.us/a/img809/8708/9agw.jpg


http://imageshack.us/a/img853/7447/d4dz.jpg


http://imageshack.us/a/img594/7285/7bw1.jpg