PDA

View Full Version : DVATX doesn't recognize connected cards



peterkwu
12-05-2012, 05:48 PM
First of all, many thanks to Diego for writing this great program. I have no doubt this will ultimately be the best solution for my TQ.

I have the three required cards and I can access all of them via the Phidgets control panel. Within the DVATX app, however, the app lists the three cards at the top but only the HC motors card at the bottom.

Has anyone seen this before? Any suggestions?

Thanks in advance.

Peter

7293

peterkwu
01-13-2013, 03:28 PM
I discovered the problem here was that the latest available build of DVATX does not support the most recent version of the AdvancedServoMotors card (rev 1). Luckily the previous version (rev 0) supported by DVATX is still available on the Phidgets website under 'end-of-life' at:

Phidgets Inc. - End-of-Life (http://www.phidgets.com/products.php?category=31)

They still have 30 left as of today. I ordered this card and it is indeed recognized by DVATX.

sagrada
03-05-2013, 03:02 PM
Help! I am hoping (perhaps against all hope) that someone will post the current link for me to be able to download the current version of DVATX. Thanks.

Mike

peterkwu
03-06-2013, 10:30 AM
You can find it here:

http://www.mycockpit.org/forums/downloads.php?do=file&id=412