PDA

View Full Version : End Mills



riche543
05-24-2011, 07:52 PM
Hi guys
Does anyone know of any suppliers of 1/16 2 flute end mills in australia.
At the moment im getting them from here http://stores.ebay.com.au/CARBIDE-PLUS?_trksid=p4340.l2563 This guy is very good , & very happy with service & prices. Im just asking as a backup just incase this ebay store happens to drop off the radar ( Always plan ahead ;) )
Cheers.

Rich.

fsaviator
05-25-2011, 01:39 AM
Try this place.

The selection changes, but they have some available:

http://www.virtual-village.com.au

Warren

davek
05-25-2011, 06:02 AM
The last time I ordered from Virt Village the bits were totally innappropriate for the job, but it may have been me.

Rich, which ones do you order through that shop?

riche543
05-25-2011, 08:58 AM
Hi dave
Like i said he is very good & quick so hopefully he will not dissapear i use the 1/16 (1.59mm) http://www.ebay.com.au/itm/1-16-0625-CARBIDE-2-FLUTE-ENDMILLS-SOFT-PLASTIC-/380308571390?pt=LH_DefaultDomain_0&hash=item588c2844fe for plastic & the 3mm ones http://www.ebay.com.au/itm/10-3-00mm-1181-2-flute-endmills-new-/150605362180?pt=LH_DefaultDomain_0&hash=item2310c77404 for cutting aluminum
Cheers
Rich.

davek
05-25-2011, 10:11 AM
Thanks Rich, what machine do you have in your CNC, They look too small for my router

riche543
05-25-2011, 06:34 PM
Hi Dave
I built my own cnc, I'm using an ozito router/ trimmer which is 1/4 collet
I use 1/8-1/4 bushing for the end mills, found a place in Sydney that sells them, at work at the mo, but if your interested in those bushings I can give you the link later
Cheers
Rich

davek
05-25-2011, 07:37 PM
Rich that would be excellent as I am having the same problem.
I have been using a tapered point bit which doesnt leave a nice font cutout
cheers

riche543
05-26-2011, 03:49 AM
Dave
Heres the link to the bushing/collet its item number JL-271, If you do decide to order some might be good idea to phone them as its a massive store that sells all weired & wonderful things, (make sure it is in stock) Ive never ordered online though them , just gone to shop direct , but a fair trek for me to go. Ive found i am able to cut the bushings in half with a hacksaw so you can use 1 for 2 end mills also allows you to insert end mill further into router , so less chance of runout/wobble. http://www.mcjing.com.au/searchresult.aspx?keyword=collet&page=2 on a side note the other place i mentioned in usa ebay. I ordered some more 1/16 bits yesterday & they were posted last night UPS so service with him is very good, hope all this helps.
Good Luck
Rich.:)

riche543
06-04-2011, 07:20 AM
The links can take us the un-usual place which is too much time consuming, if we face the same problem then what cab I do?

??? Hey ..................:?::eek: