PDA

View Full Version : Engine and spur valve blue annunciators



Clive
04-20-2011, 05:19 AM
Hi

I have so far not been able to get the engine and spur cut off valves to show on my overhead, however, I just discovered something while experimenting with PM Systems ..... I can get the blue engine and spur valve lights to function in the overhead if I use the software engine cut off valves using a mouse to switch them on and off.
My hardware engine cut off valves on my Revolution Sim Products throttle are recognised by PM Glass cockpit and function OK but are not seen by PM Systems.
Do you know what I need to do to get PM Systems to recognise the hardware engine cut off levers??

Regards

Clive ****inson

Sean Nixon
04-20-2011, 07:56 AM
I've got all this to come Clive, my overhead just turned up! :D

saabpilot
10-12-2011, 04:20 AM
This behavior have many TQ:s.

The cut off valves send the information to FS cut off instead of to PM cut off.

Can possibly be fixed with disconnecting them and reconnect with a card (Bodnar or other) that triggers PMsystem offsets for fuel cut off.
PM Cut off then sends their on/off positions to FS. Without routing the cutoffs via PMsystem SPAR valves will not "work" in the overhead panel.
I have not yet done so myself, but will try that soon.

Bjorn