PDA

View Full Version : New Build with NAV TEST and WX TEST - Question!



Jan Pemöller
05-08-2010, 06:52 AM
Hi,
does anyone noticed the new NAV TEST shown in the ND?
Is there any Offset for it. Will it work with CPFlight NAV Hardware (first version).
Any informations about this nice feature would be great.

Best regards
Jan

ChrisKLAS
05-08-2010, 05:38 PM
Can't speak to the wx radar test, but I have both NAV TEST buttons working with CPFlight hardware. Updated the MCP and both GC instances and it worked perfectly with no further setup required.

Jan Pemöller
05-09-2010, 04:27 AM
Thanks for the quick answer!
Do you have the CPFlight HW as USB Version or COM Version?

ChrisKLAS
05-09-2010, 04:51 PM
My CPFlight hardware connects via USB, but is assigned a COM port.

Delphi
05-10-2010, 04:24 AM
Hi,
what the NAV test is doing and how it is initiated (button,...)?

Best regards
Ruediger

ChrisKLAS
05-10-2010, 12:52 PM
what the NAV test is doing and how it is initiated (button,...)?

There's a TEST button on the frontplate of each NAV radio. Test simply emits a UHF signal from somewhere on the aircraft (I'm not sure where) to cause the RMI VOR 1/2 needle to point to exactly 180 degrees. If an ILS is tuned, both the localizer and glideslope will move to 1 dot off center. The TEST function is basically to allow you to verify that a signal has been emitted and, indeed, the NAV radio is recognizing it.

Delphi
05-10-2010, 02:59 PM
Thanks Chris...

Does someone found the corresponding offsets? I would like to call the test from SIOC.

Best regards
Rueidger

Delphi
05-11-2010, 02:26 PM
Found the Offsets:

04F4 -->
380/1 WXR/Radar Test On/Off
382/3 NAV1 Test On/Off
384/5 NAV2 Test On/Off

See also Project Magenta Online Documentation.

Ruediger