Lvld 767-300

[mutlaq21853]

Hi all does any one know how to move the EHDI And PFD for lvld 767-300 FSX to another moniter coz Im building my cockpit based on it

thanks
mutlaq21853@yahoo.com

[rhysb]

I use a program called Maxivista. Works brilliantly.

[Polmer]

We need to know if you intend on moving the PFD to another monitor on the same system FSX is running or do you want to run on another network computer?

If you wish to move it to another monitor ( using multiple display cards) then this is easy, but most builders buy a program called FSpanel studio and create there own modified panel. You simple undock the new panel window and drag it to the new monitor, re-size & Save.

If you want to run it on an networked computer, the only way is to use mavista. But be warned....... Using maxvista to display gages on a netwokered system DOES NOT REDUCE THE WORKLOAD ON THE MAIN PC!

~Polmer

[mutlaq21853]

The Problem with LVLD 767-300 FSX is you cant move psf or EHIS alone or as indivisual whether all panel or NO, In FS2004 version there is modefide panel were you can move , resize PFD , my main issue is have control on the PFD alone not with all panel.
I use network , I have Triplehead3go, I have wideview and im using 2 PC
check this Link and the post by (stabell)
http://www.leveldsim.com/forums/forum_posts.asp?TID=19402

[ran56]

You can use Maxivista but as said below, it will cost in frames.
You can split the LDS (x of fs9) to several displays on same pc.
I have done this and so other B76 builders.
You need to tweak the panel.cfg.

in the B76 builders group on Yahoo, we uploaded some panel.cfg
with MIP split panels cross 3 monitors and re-sized gauges to fit behind
MIP cutouts.
In FSX I monitored great frame loss (My pc is mid specs) but with high end pc,
it should be ok.

Regarding controlling the EHSI and EADI and rest, easy.
LDS has SDK and with OC cards + SIOC code + Nico Kahn's great Lekseecon sw
You can control most of the A/C .

To subscribe to the group
send email to: b767homecockpitbuilders-subscribe@yahoogroups.com

Have fun building.

[mutlaq21853]

thanks ran56 , I already registered in the yahoo group but I dont know how to get into the group file , I will try again .

Im not realy good in editing the CFG files and also I dont want allot of cards to deal with

many thanks again to all and if any one find simple way I will be greatfull.

[mutlaq21853]

Mr ran56 not yet aproved by the yahoo group for 767 home buider manager

[ran56]

Hello,
OK found you registration and approved it.
You should receive email with all details.

Regards,

[mutlaq21853]

Thanks ran 56 I got it and will check it today

thanks again for your help