PDA

View Full Version : Trimindicator


tom2
08-27-2008, 01:36 PM
Hello!

I canīt see the Trimindicator. Please how can i display the Trimindicator?

I see only the Flapindicator.

Thanks for your help.

Greetings Tom
DAL900
08-27-2008, 02:24 PM
We need a lot more information on what you are referring to so we can help, trim indicator on what aircraft and is it related to Project Magenta or some other add-on
tom2
08-27-2008, 06:21 PM
Projekt Magenta with PMDG 737-800.

Tom
Trevor Hale
08-27-2008, 07:59 PM
If you open the glasscockpit .ini file look for the line that says

"SHOWCONTROLLS=NO or 0"

and change it to say

"SHOWCONTROLS=YES"

Trev
tom2
09-01-2008, 08:25 AM
Hi!

ShowControls is on. Yes, there is a line written in the ECAIS, where i can see
the trim for expl. 5,3.

But i know, that the must be also an indicator like the flapindicator and that
is what i donīt know how to display.


Thanks!
Thomas
AchillesP
09-01-2008, 08:29 AM
Hi,

You can see those thinks only if you have also advdisplay to on at gs.

Achilles
tom2
09-01-2008, 01:38 PM
Hi Achilles!

Following is written in GC

EngineGauges=Round
AdvDisp=On
/ Displays AdvDisplay (by Peter Dowson)
/ texts above the EICAS
ShowControls=On
/ Displays flight controls and other
/ information on the EICAS page

But no function.
Thomas
AchillesP
09-01-2008, 01:42 PM
Hi Achilles!

Following is written in GC

EngineGauges=Round
AdvDisp=On
/ Displays AdvDisplay (by Peter Dowson)
/ texts above the EICAS
ShowControls=On
/ Displays flight controls and other
/ information on the EICAS page

But no function.
Thomas

Hi Thomas,

Did you set also the trimgauge = on ?

Achilles
tom2
09-01-2008, 02:03 PM
Hi Achilles!

I guess yes

TrimGauge=On
FlapGauge=On
/ Displays Analog Flap/Trim Gauge
/ in EICAS page
FlapGaugeHide=OFF
/ Displays Flap Gauge only when shown
/ on EICAS page
AchillesP
09-01-2008, 03:05 PM
Hi Achilles!

I guess yes

TrimGauge=On
FlapGauge=On
/ Displays Analog Flap/Trim Gauge
/ in EICAS page
FlapGaugeHide=OFF
/ Displays Flap Gauge only when shown
/ on EICAS page

I guess that you also trying to see that from the eicas page. Because those thinks works from upper or lower eicas.
tom2
09-01-2008, 03:57 PM
Hi!

I really donīt no what else i can do.
If i go in the GC and open the menu with ESC, press F3, with tab i can scroll through the
EICAS pages - then in "Programm options" >standby -

If i set a cross to "analog Flap Gauge - the Flapindicator is not displayed anymore
If i set "no cross" then it shows me the Flap Gauge

so but

if i make the same with "analog Trim Gauge" - if i set a cross or not nothings happens with
the "Trim Gauge"

Thomas
AchillesP
09-01-2008, 04:05 PM
Hi!

I really donīt no what else i can do.
If i go in the GC and open the menu with ESC, press F3, with tab i can scroll through the
EICAS pages - then in "Programm options" >standby -

If i set a cross to "analog Flap Gauge - the Flapindicator is not displayed anymore
If i set "no cross" then it shows me the Flap Gauge

so but

if i make the same with "analog Trim Gauge" - if i set a cross or not nothings happens with
the "Trim Gauge"

Thomas

Why do not you drop an email to projectmagenta? They can help better that us for sure.