David Withers
03-06-2008, 06:35 AM
hi!
can someone give me the cdu cfg settings so the bitmapless screen will max on startup? or maybe post it here for all?
many thanks
david withers
Boeing AUS.
patrickm
03-12-2008, 07:43 AM
Hi David
There is the cdu.ini file for fullscreen (and without bitmap)
it's working fine on my notebook.
Patrick
[Project Magenta CDU]
Build#394
[Display]
Title=Off
/ Enables/Disables Title Bar.
WindowName=Project Magenta CDU - Build 394
/ You can set the name in the Title
/ Bar here.
Topmost=Off
/ Will set the CDU program on top
/ of any other window.
FSWindow=Off
FSFocus=Off
/ Will try to be inside the FS window
/ and give back the focus to FS after
/ a key has been pressed
Minimize=Off
/ Will minimize after initialization
[Network]
DisableAutoNetDir=Off
/ Automatically creates the netdir
/ entry when enabled
NetDir=c:\cdu\netdir\
/ Sets the folder which shares data
/ with the other programs
SBPPath=
/ Fath to the folder in which Squawkbox
/ flightplans are saved
[Flight]
LimitMCPSpeed=Off
AutoFlapRetract=Off
AutoFlapExtract=Off
/ MCP Speed limits set by MCDU, flap
/ retraction auto or manual
[User]
LastBuild= 394
/ Last version of the software run
/ on this PC
DeleteCFPFiles=Off
/ Automatically deletes binary CDU
/ Flight Plan Files (.CFP files)
/ when flight plans flushed and program
/ exits.
EngravityComm= 0
/ Serial communication to Engravity
/ CDU hardware
ElanComm= 0
/ Serial communication to CDU hardware
/ Logs flight path calculation.
Font=pmbcdu
FontNoSerif=Off
FontBold=Off
FontFactor= 1
/ Font display parameters
Text=white
BackgroundBlue=Off
/ To set blue background in full
/ text mode
PreFlight=Full
/ Can be set to Off/On/Full which
/ results in different handling of
/ the CDU setup process. E.g speeds
/ and weights are set automatically
/ when this is off.
NoSelPrompt=Off
/ Disables RWY and CO RTE SEL prompts
NoAwyPrompt=Off
/ Disables option to offer airway
/ proposals for route page entries
Flush=Off
/ Flushes data from the CDU on startup.
FlushOnLand=Off
/ Flushes data from the CDU when
/ speed is below 60 knots
DescendNowNM= 50
/ Distance from T/D at which DESCEND
/ NOW is anunciated on the DES page
/ (lower alt selected, VNAV)
Messages=On
/ Displays current messages in the
/ Scratchpad.
NoCOMXPDR=Off
/ Disables COM/XPDR display in the
/ NAV RAD page
KeyboardLights=Off
KeyboardLightsXP=Off
/ Lights keyboard lights when EXEC,
/ MESS, FAIL light up
AutoKeyLayout=Off
KeyLayout=74
/ Setting from MENU/DISPLAY where
/ the type of keyboard layout is
/ controlled
PageUpdate= .8
/ Sets the update frequency of the
/ remote CDU screen
RemotePageUpdate= 1
AutoILSLOC=On
/ Sets LOC CRS automatically
ShowFrqinRoute=On
/ Displays frequency of VORs/NDBs
/ on the LEGS page
CLBThrOAT=On
/ Uses OAT instead of TAT for the
/ climb thrust calculation
PlanStep=On
/ Handles the scrolling of the LEGS
/ page differently in PLAN mode
AutoGear=Off
/ Auto Gear for Standalone version
DisableDoubleClick=Off
/ disables minimizing upon mouse
/ double click
NoFSGWT=Off
/ Does not display FS gross weight
/ in the PERF INIT page [in brackets]
Case=Brown
Log=Off
/ Logs flight path calculation/ CDU
/ procedures
StrobeLights=Off
StrobeBacklight=Off
/ Shift Register Light Handling Customizaition
[OpenGL]
/ This section is for OpenGL settings
/ and OpenGL Full Screen Display
UseOpenGL=On
/ Will use OpenGL rather than normal
/ windows text, 24 columns, 14 rows
FontSmoothViaPolygons=On
/ When set to on, font smoothing
/ for display is done via polygons,
/ if off, via blended outlines
UseOpenGLFull=On
/ Bitmap-less full screen operation
SetOpenGLFull=On
/ Will automatically Maximize screen
/ for full screen operation
OpenGLFullX= 0
OpenGLFullY= 2
OpenGLFullZ= 0
OpenGLFullWidth= 0
OpenGLFullHeight= 0
OpenGLFullFontSize=-12
OpenGLFullSpacing= 0
OpenGLFullScratchPad= 2
OpenGLFullTitleText= 2
OpenGLFullRotate= 0
[Max]
Full=On
/ Full screen text activation and
/ parameters
/ To set, use MENU key (twice), DISPLAY,
/ FULL SCREEN pages
FullTopmost=Off
FullNoFrame=Off
InvertFull=Off
ScreenTop= 0
ScreenLeft= 0
ScreenHeight= 5175
ScreenWidth= 9600
TextTop= 302
TextLeft= 475
TextWidth= 6933
TextOffset= 980
[COMMAND Keyboard Codes]
//these are used *in addition* to the Ctrl-F1-F12 etc. commands
//for INIT/REF RTE ETC
David Withers
03-13-2008, 07:12 AM
thankyou very much pat.
david w.
Boeing Aus.