PDA

View Full Version : Cold and Dark



Peter Nielsen
10-26-2007, 06:59 AM
Hi,

Whilst Cold and Dark is nice on initial start up, lately PM systems also resets it self to Cold and Dark in the event the PC on which PM system runs needs rebooting. this was not the case before, where PM system would "read" the current status of the aircraft and set accordingly, now it resets all to cold, dark and OFF.. rather annoying if one is at FL390 with VNAV/LNAV engaged..

Anyone else has this issue?

Peter

michelmvd
10-27-2007, 02:06 PM
Hello,
Which interface cards are you using ?

B. RGds
Michel

737NUT
10-27-2007, 03:38 PM
I was using phidgets controlled by pmsys and had the exact same problem myself!! Drove me nuts!!

michelmvd
10-28-2007, 09:47 AM
Yep that's what I also noticed here.
There is a moment they are correct, but then finally it become dark and cold, whatever the position of the swich. I always have to set all swiches out before leaving the sim. This is a longtime situation, not only the 2 latest builds (with phidgets)
B. Rgds
Michel

Peter Nielsen
10-31-2007, 09:01 AM
Hello,
Which interface cards are you using ?

B. RGds
Michel


I have Phidgets lined up ready to be interfaced, but so the only interfacinh in the overhad are all the annunciators, i still have not started on the switches and rotaries as quite frankly i am a bit confused how to wire it all up..:o

Cheers
Peter