04-20-2007, 08:40 PM #1
Overhead panel lighting.... well sort of...
After staring at the overhead panel that Gwyn has made, particularly the ones where he has part of them backlit, an idea popped into my head. So I got out a peice of cardboard and cut me a square hole 1" wide by 5/16" tall. Typed out the word "High" and sized it accordingly and printed off . I stapled the piece of paper to the back of the cardboard and set it on top of a flashlight. Bam! The word "High" is highlighted as seen here:
What do you guys think?
04-20-2007, 09:48 PM #2
- Join Date
- Nov 2005
- Perth, Western Australia
That is more or less what I'm doing, the holes are cut in my backplate and the stickers are place over the holes. In the silver panels - Fuel,hyd etc. the backlighting is a bit more sophisticated, see the June CP mag.
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
Supporter of MyCockpit.org, please join me in donating!!!
By ScottyPcGuy_03 in forum Cockpit Parts and Motion PlatformsReplies: 2Last Post: 02-07-2010, 08:40 PM
By hladamjr in forum I/O Interfacing and HardwareReplies: 3Last Post: 01-05-2010, 10:09 PM
By aviatorden in forum PMSystemsReplies: 3Last Post: 12-14-2009, 03:49 PM
By David Rabiner in forum PM General Q & AReplies: 2Last Post: 02-12-2007, 09:38 PM
By Peter Hein in forum PM General Q & AReplies: 3Last Post: 02-12-2007, 09:22 AM