Thread: glass cockpit
03-25-2007, 03:21 PM #1
Well folks i got the flyware glass cockpit going, been working on it all weewkend.
And you right you need to start from your MIP and build uopn it.
after seeing how the networked glass cockpit works and tested it , i now can move to the next stage and that is painting the MIP and working on the landing gear.
Im wanting the landing gear to be pretty accurate as possible , meaning as far as the instrument lights to work in unisun.( wanting to led,s to light up after i have raised the landing gear.
would also like some good plans if any are out there on landing gear lever.
feel like i got things done to move to the next step.
im thinking of strongly buying the flyware cockpit guages .
Well folks enough of yacking just wanted to let you know how things were going.
03-25-2007, 06:20 PM #2
- Join Date
- Nov 2005
- Perth, Western Australia
My gear lever is very simple and works well, I've modified it since this pic was taken. It now has seperate gear up & gear down switches but the mechanism is the same.
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
Supporter of MyCockpit.org, please join me in donating!!!
03-25-2007, 10:19 PM #3
Here is a great tutorial on a landing gear leaver.
By raymtoh in forum PM General Q & AReplies: 0Last Post: 07-22-2007, 09:33 PM
By Enrico Schiratti in forum PM General Q & AReplies: 0Last Post: 04-13-2006, 10:53 AM
By Olivier REVERBERI in forum PM General Q & AReplies: 0Last Post: 03-26-2006, 04:33 AM
By Enrico Schiratti in forum PM General Q & AReplies: 1Last Post: 02-09-2006, 07:47 AM
By Marc Nieuwhof in forum PM General Q & AReplies: 0Last Post: 02-03-2006, 03:57 PM