Results 1 to 5 of 5
  1. #1
    Jon P
    Guest

    Re: Autopilot Disengage

    Ok I solved my problem by assigning "Autopilot OFF" in FSUIPC button page.

    But now new problems appear.

    GAIFR

    1. I can't find any assignments in FSUIPC or elsewhere to operate the
    Chronometer using a remote keyboard or a Goflight pushbutton (p is there any way
    to program buttons to operate the "select", "ST/SP" and "Reset" buttons?

    2. The upper triangle on the artificial horizon on the C172 is not centered
    when wings are leveled. It has a diference of about 3 mm.

    3. The C172 has an Ammeter that is not reproduced in GAIFR. Is it possible to
    add one to the C172 panel?

    Instructor Station

    1. Whenever I take off from an airport and want to land on ANOTHER airport,
    using ILS the approach page, it DOES NOT show the aircraft landing there
    although I can see it in the report.

    2. Whenever I adjust the traffic PMInst crashes without repair. I must use
    Task Manager to shut it down and restart.

    3. The logger seems to add horizontal lines randomly during the information
    recording. They occupy the full screen and seem to dissapear if I change to
    another page and return.

    4. No Logger report like the approach! I find the logger to be more important
    than the approach and would really be very useful to have a report in html
    or other format like the approach.

    5. When putting the map in full screen, on the approach page the artificial
    horizon "drops" down out of the rulers an appears with inaccurate
    readings.

    6. Is there a chance to add "rain" or "snow" or even "thunderstorm" to the
    Environment page?

    7. Is there going to be any possibility to download REAL Weather? If so from
    which souce? Jeppesen?

    8. Are there tutorials to help creating failures on the Failures page?

    Please be so king to answer these questions the best you can and please keep
    up de good work.

    Thank you.




  2. #2
    Enrico Schiratti
    Guest

    Re: Autopilot Disengage

    Hi Jon,

    > 1. I can't find any assignments in FSUIPC or elsewhere to operate the
    > Chronometer using a remote keyboard or a Goflight pushbutton (p is there


    > any way
    > to program buttons to operate the "select", "ST/SP" and "Reset" buttons?


    I do not think we have offsets for that, unless you use the 542A keyboard
    input... keys 4, 5 and 6. These correspond to the commands 52, 53 and 54.

    > 2. The upper triangle on the artificial horizon on the C172 is not
    > centered
    > when wings are leveled. It has a diference of about 3 mm.


    Are you using build 96?

    > 3. The C172 has an Ammeter that is not reproduced in GAIFR. Is it possible


    > to
    > add one to the C172 panel?


    Will put it in the list.

    > 1. Whenever I take off from an airport and want to land on ANOTHER
    > airport,
    > using ILS the approach page, it DOES NOT show the aircraft landing there
    > although I can see it in the report.


    Hmmm... where precisely does it not show it?

    > 2. Whenever I adjust the traffic PMInst crashes without repair. I must

    use
    > Task Manager to shut it down and restart.


    I haven't observed that.

    Are you using any special tools for the traffic?

    > 3. The logger seems to add horizontal lines randomly during the
    > information
    > recording. They occupy the full screen and seem to dissapear if I change
    > to
    > another page and return.


    How frequent is this, which graphics card and drivers?

    > 4. No Logger report like the approach! I find the logger to be more
    > important
    > than the approach and would really be very useful to have a report in

    html
    > or other format like the approach.


    It should have CSV file output in the current version, did you see it?

    > 5. When putting the map in full screen, on the approach page the
    > artificial
    > horizon "drops" down out of the rulers an appears with inaccurate
    > readings.


    I do not follow? Map in full screen how?

    > 6. Is there a chance to add "rain" or "snow" or even "thunderstorm" to

    the
    > Environment page?


    I tried that, but haven't had much success with it so far.

    > 7. Is there going to be any possibility to download REAL Weather? If so
    > from
    > which souce? Jeppesen?


    I think there are very complex and good tools for that...

    > 8. Are there tutorials to help creating failures on the Failures page?


    Not tutorials as such, there is a description of how offsets can be added.

    Regards

    Enrico


  3. #3
    Jon P
    Guest

    Re: Autopilot Disengage

    Hello again, thanks for the quick reply.

    >I do not think we have offsets
    >for that, unless you use the
    >542A keyboard
    >input... keys 4, 5 and 6.
    >These correspond to the
    >commands 52, 53 and 54.


    I'll try this. But may I remind you I have Magenta on a second computer. So
    this can only work in the computer with PM.

    >Are you using build 96?


    Yes I am.

    >Will put it in the list.


    Thank you.

    >Hmmm... where precisely does
    >it not show it?


    Well pretty much any airport, really.

    >I haven't observed that.
    >Are you using any special
    >tools for the traffic?


    It doesn't actually crash. It freezes and does not allow any further changes.
    So I consider it a crash. No special tools for traffic, just plain old FS
    AI.

    >How frequent is this, which
    >graphics card and drivers?


    Very frequent and random. I think I must change my graphics card as I wanted
    to add a secondary monitor, so I will be on stand-by for this one. it's a
    6200 with latest Nvidia drivers.
    >
    >It should have CSV file output
    >in the current version, did
    >you see it?


    I have build 48. No CSV reports.

    >I do not follow? Map in full
    >screen how?


    In the main screen I get to choose to put the map in fullscreen on the
    background. If I do so and pick the approach page I get the error I mentioned.
    This does not happen using just the approach page without the background
    map.
    >
    >I tried that, but haven't had
    >much success with it so far.


    On of my training procedures is control over adverse weather. I can only add
    visibility, clouds and winds, but rain and wind gusts are really needed.

    >I think there are very complex
    >and good tools for that...


    I'm really a newbie on this. Can you please tell me some?

    >Not tutorials as such, there
    >is a description of how
    >offsets can be added.


    Are those on the manual? can't seem to find it.

    Thank you so much

    Jon P





  4. #4
    Enrico Schiratti
    Guest

    Re: Autopilot Disengage

    >>I do not think we have offsets
    >>for that, unless you use the
    >>542A keyboard
    >>input... keys 4, 5 and 6.
    >>These correspond to the
    >>commands 52, 53 and 54.

    >
    > I'll try this. But may I remind you I have Magenta on a second computer.
    > So
    > this can only work in the computer with PM.


    No, it will work from any computer, it will check those offsets... try it.

    >>Hmmm... where precisely does
    >>it not show it?

    >
    > Well pretty much any airport, really.


    > 1. Whenever I take off from an airport and want to land on ANOTHER
    > airport,
    > using ILS the approach page, it DOES NOT show the aircraft landing there
    > although I can see it in the report.


    No, I do not understand what you are saying... it depends on the tuned ILS
    and it should show the graph independently from where you are... so I am
    trying to understand where *in the program* it isn't showing what.

    >>It should have CSV file output
    >>in the current version, did
    >>you see it?

    >
    > I have build 48. No CSV reports.


    www.projectmagenta.com/latest.html

    >>I think there are very complex
    >>and good tools for that...

    >
    > I'm really a newbie on this. Can you please tell me some?


    I do not know what the current "hot" weather generator is... perhaps someone

    else may jump in, or google it with reviews...

    >>Not tutorials as such, there
    >>is a description of how
    >>offsets can be added.

    >
    > Are those on the manual? can't seem to find it.


    Hmmm...

    http://www.projectmagenta.com/resources/pmInstrDoc.pdf
    CONTROLS and SYSTEMS/FAIL Screen


  5. #5
    Jon P
    Guest

    Re: Autopilot Disengage

    >>>I do not think we have offsets
    >>>for that, unless you use the
    >>>542A keyboard
    >>>input... keys 4, 5 and 6.
    >>>These correspond to the
    >>>commands 52, 53 and 54.

    >>
    >> I'll try this. But may I remind you I have Magenta on a second computer.


    >> So
    >> this can only work in the computer with PM.

    >
    >No, it will work from any
    >computer, it will check those
    >offsets... try it.


    So this should be done in the Main computer using FSUIPC button assignment?
    I'm sorry this is all news to me.

    >>Hmmm... where precisely does
    >>>it not show it?

    >>
    >> Well pretty much any airport, really.

    >
    >> 1. Whenever I take off from an airport and want to land on ANOTHER
    >> airport,
    >> using ILS the approach page, it DOES NOT show the aircraft landing there
    >> although I can see it in the report.

    >
    >No, I do not understand what
    >you are saying... it depends
    >on the tuned ILS
    >and it should show the graph
    >independently from where you
    >are... so I am
    >trying to understand where *in
    >the program* it isn't showing
    >what.



    Let's say I take off from any given airport Without ILS. the Station states
    "ILS Inactive" which is true. I fly to an international airport (say LPPT)
    and tune in the ILS frequency. For LPPT it's 109.10. The "ILS Inactive"
    shuts off, and on the Position page I write "LPPT" and choose "ILS Rwy 3
    (109.10)". When I come back to the Approach page I should get the airplane icon
    moving on the LOC and GS, but I don't. Then If I press the report
    button,even with no graphic on the screen, the html file shows me the information I
    wanted, the LOC and GS. So I guess it does record the information, it just
    doesn't show on screen.

    >>>It should have CSV file output
    >>>in the current version, did
    >>>you see it?

    >>
    >> I have build 48. No CSV reports.

    >
    >www.projectmagenta.com/latest.
    >html


    I've been here. No new Intructor files. I've found a program to install the
    CSV reader in the reports folder. But can't read the LOGG files with
    anything.

    >>>I think there are very complex
    >>>and good tools for that...

    >>
    >> I'm really a newbie on this. Can you please tell me some?

    >
    >I do not know what the current
    >"hot" weather generator is...
    >perhaps someone
    >else may jump in, or google it
    >with reviews...


    That would be great. Thank you!

    >>>Not tutorials as such, there
    >>>is a description of how
    >>>offsets can be added.

    >>
    >> Are those on the manual? can't seem to find it.

    >
    >Hmmm...
    >
    >http://www.projectmagenta.com/
    >resources/pmInstrDoc.pdf
    >CONTROLS and SYSTEMS/FAIL
    >Screen


    I read it already. I guess I must read it again.


    Thanks again


Similar Threads

  1. TOGA and AT disengage on FSC TQ (key emulation)
    By Aaron in forum PM General Q & A
    Replies: 6
    Last Post: 12-19-2010, 04:47 AM
  2. Autobrakes disengage with toe brakes
    By KLM077 in forum General Builder Questions All Aircraft Types
    Replies: 6
    Last Post: 10-27-2009, 08:35 PM
  3. PMDG Autothrottle disengage
    By MrRoper in forum General Builder Questions All Aircraft Types
    Replies: 1
    Last Post: 02-13-2009, 09:13 PM
  4. Autopilot Disengage
    By Jon P in forum PM General Q & A
    Replies: 1
    Last Post: 04-13-2006, 10:05 AM