Results 1 to 7 of 7
  1. #1
    Jan Pemoeller
    Guest

    LAND ALT and FLT ALT

    Hi,

    I just wanted to ask if somebody has connected the LED segments to PMsystem
    directly for the digital display of the landing and cruising altitude for
    the cabin pressure?

    Maybe it is possible via PhidgetTextLED ???
    http://www.phidgetsusa.com/docu/docu....asp?p=TextLED

    Any help here or ideas are very welcome,

    Thanks
    Jan

    www.cityvox.de/b737


  2. #2
    Thomas Richter
    Guest

    LAND ALT and FLT ALT

    Hi Jan,
    I dont`have Displays from Phidgets, but the cards I use from Phidgets are
    connected via FS2Phidget on the same PC-
    On this PC I use:
    1. - 8/8/8, 0/16/16, 0/0/4, LED-64 Phidgets via FS2Phidget
    2. - IOCard-USB with MasterCards and USBServo via SIOC
    3. - pmSystems
    4. - WideFS, of corse
    No problem, all is running.
    I use FS2Phidget instead of pmSystems direct, because after the same
    confirugation on both prog. this one is faster.

    Best Regards
    Thomas Richter


  3. #3
    Jan Pemoeller
    Guest

    LAND ALT and FLT ALT

    Hi Thomas,

    I also work with FS phidgets, but to have the annonciators dim and brigth you
    need to connect at least the LED-Board direct to pm-system.
    My question was how to connect the digital numbers for FLT/LAND altitude.
    Have you a solution for it ?

    Best regards
    Jan


  4. #4
    Thomas Richter
    Guest

    Re: LAND ALT and FLT ALT

    Hi Jan,
    > My question was how to connect the digital numbers for FLT/LAND altitude.

    They don`t work in pmSystems.
    But what I mean is, you can run FS2Phidget for your Display (only) on the
    same PC.
    Led 64 and other stuff can controled by pmSystems and Displays can controled

    by FS2Phidget.
    In FS2Phidget you have to choose the Card you will work with.
    So you can splitt the cards.
    --
    Best Regards
    Thomas Richter


    "Jan Pemoeller" schrieb im Newsbeitrag
    news:410171.81874@wb.onvix.com...
    > Hi Thomas,
    >
    > I also work with FS phidgets, but to have the annonciators dim and brigth


    > you
    > need to connect at least the LED-Board direct to pm-system.
    > My question was how to connect the digital numbers for FLT/LAND altitude.
    > Have you a solution for it ?
    >
    > Best regards
    > Jan
    >



  5. #5
    Jan Pemoeller
    Guest

    Re: LAND ALT and FLT ALT

    Hi Thomas,

    first thanks for your answers - thats the way I will try to set up my system
    - spliting the cards.

    I did not know that the LAND/FLT selectors are just fakes - I thought they
    work together with the analog cabin pressure gauges. Maybe Enrico can jump in
    here ... is it on the list?

    Thanks
    Jan


  6. #6
    Jan Pemoeller
    Guest

    Re: LAND ALT and FLT ALT

    Hi Thomas,

    first thanks for your answers - thats the way I will try to set up my system
    - spliting the cards.

    I did not know that the LAND/FLT selectors are just fakes - I thought they
    work together with the analog cabin pressure gauges. Maybe Enrico can jump in
    here ... is it on the list?

    Thanks
    Jan


  7. #7
    John Ebbers
    Guest

    Re: LAND ALT and FLT ALT

    Would be also nice to display the Battery and AC, DC voltages etc.

    Bart


Similar Threads

  1. How to Land using RNAV in PMDG 747-400
    By stepbk in forum General Microsoft Flight Simulator 10 (FSX)
    Replies: 8
    Last Post: 03-14-2011, 08:39 PM
  2. From the land down under
    By pvjen1 in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 5
    Last Post: 10-02-2010, 03:21 AM
  3. How to land a 747-400 PMDG
    By stepbk in forum General Builder Questions All Aircraft Types
    Replies: 7
    Last Post: 01-31-2010, 10:19 AM
  4. Land alt / flt alt
    By PascalHaldenstein in forum General Builder Questions All Aircraft Types
    Replies: 11
    Last Post: 01-20-2009, 06:59 PM