Flashing annunciator since new version?

[alandyer]

Martjin,

Do not think problem is bug.

Think we got lucky!
Earlier version worked, but for wrong reasons.

Where did you get values for settings for Ramair and Cowlflap2 ?

Those are Pmsystems offsets.
Their documentation does not specify values.
You need to go into development mode to determine values.
Go into development mode fro pmSystems menu.
In development mode, if you hover or click cursor on a light or switch
the offset and value is displayed.

A light that is On or Off will not have a range of values from 0 to 16383.

Settings should be:

[Ramair]
Offset=5681
Length=1
FStype=Digital
OffValue=0
OnValue=1

[cowlvalve2]
Offset=5659
Length=1
FStype=Digital
OffValue=0
OnValue=1


Let me know if this works!

New version will make it much easier to adjust settings.

Veels geluk,
Alan.

[lineman55]

Hey Alan,
I have been away a bit,,and here is what I used to resolve the flashing light issue.
I used this:
[LEFT_FLAPS_DEFLECTION]
Offset=0BE0
Length=4
FSType=Proportional
LoValue=0
HiValue=16383

Works fine now.
Originally I am using a GOFLIGHT module for my flaps.I never intended to try to use the digital in for this issue.I just wanted the LED to respond when the flaps were set using the GOFLIGHT.
As of right now my LEFLAPS TRANSIT lights first up until it reaches FLAPS 10 and then exstinguishes and FLAPS EXT lights and stays on .Then the whole process is reversed when retracting all flaps.
Its pretty cool to see..!

Im still working on this fuel light issue..(I am relentless when it comes to these things)