Use of TIMER Settings Box

[737FlightSim]

Hi Rob
Do you have access to a O-Scope, so that you can look at the output wave form of the Phidget Servo. (White wire)

I have been playing with the Phidget Servo and noticed the output is rock solid using the servo-slider.exe VB Example.

But when I use FS2Phidget, there are dropouts in the Phidget Servo wave form.

Looking at the Phidget Servo output with the O-Scope, AND changing the timer setting will lower the rate of drop outs but they still happen.

David
www.737FlightSim.com

[alandyer]

Rob,

Played atround with servos this weekend.
And with lots of help from David and his trusty oscilloscope.
2.0.9 is now available for download.
Servos should be a lot smoother, especially at small timer settings.
Let me know if there is an improvement.

Alan.

[mottsprint@earthlink.net]

Alan,

CONFIRMED!!

MUCH smoother servo operation with build 2.09.

I did find however, the operation is still smoother in my system with the timer set at 1200 ms. and I did have to manually enter a new value for Throttle 1 in the .ini file....otherwise Rev1 would operate at idle.

I think Rob is in Europe right now....so he will be happy when he gets home!

Was wondering also if you have posted his video of the throttles in "action"....where I can find that file?

Regards,

Mel Ott