Results 1 to 4 of 4
  1. #1
    Enrico Schiratti
    Guest

    Re: Autoland Problems

    > Well, as you know I dont use a CDU, but what you say could be the problem
    > also.
    >
    > Tell me again, if one is not using a CDU, is the data from the 737-700

    txt
    > file, of any use at all? Do I have to do everything manually as to fig
    > out
    > wt, speeds, V1 Vr, Vref, etc?


    Well.. yes... if it matters to you. In any case, if you are coming in a bit

    too hot on your approach, it certainly won't land properly.

    What flap setting/speed were you using during your approach? What was the
    weight, how much fuel?

    Ciao

    Enrico


  2. #2
    Randy Eskow
    Guest

    Re: Autoland Problems

    Hi,

    So assuming no CDU is being used:

    1. then when I am landing and see the ref speed box appear at lets say 131
    kts, is PM basing this from what fuel and wts and winds, etc that are
    happening at that moment?...

    and if number 1 is true, then can one (to make it real enough) take various
    data inputs, such wt and fuel, wind, temp, etc, and try to use the 737
    charts or whatever manual one has, to arrive at diff speeds and flap settings,
    assuming the aircraft flight model is accurate.

    ...or are those speed and flap indicators in the PFD speed pole, going to be
    just useless because I do not use the CDU and flight model related speeds
    be off?

    Randy




  3. #3
    Enrico Schiratti
    Guest

    Re: Autoland Problems

    > 1. then when I am landing and see the ref speed box appear at lets say
    131
    > kts, is PM basing this from what fuel and wts and winds, etc that are
    > happening at that moment?...


    Fuel and weight, but it is more "scientific" if it comes from the FMC.

    > and if number 1 is true, then can one (to make it real enough) take
    > various
    > data inputs, such wt and fuel, wind, temp, etc, and try to use the 737
    > charts or whatever manual one has, to arrive at diff speeds and flap
    > settings,
    > assuming the aircraft flight model is accurate.


    Yes... you can.

    Any reason for not using the FMC, which I think you own, in the first
    place?

    > ..or are those speed and flap indicators in the PFD speed pole, going to
    > be
    > just useless because I do not use the CDU and flight model related speeds
    > be off?


    They are not useless, just be close to them during an autoland if possible.

    Ciao

    Enrico


  4. #4
    Randy Eskow
    Guest

    Re: Autoland Problems

    Thanks Enrico,

    I dont use the CDU for a few reasons, one is that I am of the old school
    where I like to fly the way they use to in the mid 60s. I dont think they had
    a CDU on 707s and 727s, maybe even early 737s then. I sure dont remember
    seeing one in the real cockpits.

    Second, I just dont have the will or time to learn how to use a CDU right
    now.

    Randy


Similar Threads

  1. Autoland with CDU?
    By Tarzan737 in forum PM Boeing FMC/CDU
    Replies: 7
    Last Post: 12-16-2010, 08:36 AM
  2. No autoland on 747
    By GSalden in forum PM General Q & A
    Replies: 4
    Last Post: 12-13-2007, 06:38 AM
  3. No autoland
    By npbosch in forum PM General Q & A
    Replies: 7
    Last Post: 12-10-2007, 09:29 AM
  4. Autoland with PM 737
    By Hans Krohn in forum PM General Q & A
    Replies: 12
    Last Post: 02-12-2007, 03:54 AM
  5. Autoland Problems
    By Randy Eskow in forum PM General Q & A
    Replies: 4
    Last Post: 04-13-2006, 11:22 AM