Results 1 to 8 of 8
  1. #1
    Ray Proudfoot
    Guest

    CDU Nav Data deselect area doesn't work

    I'm tying to deselect areas in the nav data I never fly in such as Sth
    America and Pacific. The Nav Data option on the Index page has a Areas
    Select option that displays the 6 areas and currently they're all active.

    I would have thought that pressing the button against an entry would
    deselect it but it doesn't. I just see Inop displayed.

    Does anyone know if this is meant to work and if so - how?

    I'm using build 372 of the CDU.

    --
    Regards,

    Ray
    Cheshire, England


  2. #2
    Ray Proudfoot
    Guest

    Re: CDU Nav Data deselect area doesn't work

    Anyone else with this problem???



    "Ray Proudfoot" wrote in message
    news:406643.81263@wb.onvix.com...
    > I'm tying to deselect areas in the nav data I never fly in such as Sth
    > America and Pacific. The Nav Data option on the Index page has a Areas
    > Select option that displays the 6 areas and currently they're all active.
    >
    > I would have thought that pressing the button against an entry would
    > deselect it but it doesn't. I just see Inop displayed.
    >
    > Does anyone know if this is meant to work and if so - how?
    >
    > I'm using build 372 of the CDU.
    >
    > --
    > Regards,
    >
    > Ray
    > Cheshire, England
    >



  3. #3
    Bill Trinidad
    Guest

    Re: CDU Nav Data deselect area doesn't work

    Hi Ray,

    I use the NavExtract with the screen shown on PM's NavData page and it works

    great.

    I have not tried ( I didn't even know it was possible ) to use any buttons
    on the CDU.

    Cheers,

    Bill


    "Ray Proudfoot" wrote in message
    news:407286.81263@wb.onvix.com...
    > Anyone else with this problem???
    >
    >
    >
    > "Ray Proudfoot" wrote in message
    > news:406643.81263@wb.onvix.com...
    >> I'm tying to deselect areas in the nav data I never fly in such as Sth
    >> America and Pacific. The Nav Data option on the Index page has a Areas
    >> Select option that displays the 6 areas and currently they're all

    active.
    >>
    >> I would have thought that pressing the button against an entry would
    >> deselect it but it doesn't. I just see Inop displayed.
    >>
    >> Does anyone know if this is meant to work and if so - how?
    >>
    >> I'm using build 372 of the CDU.
    >>
    >> --
    >> Regards,
    >>
    >> Ray
    >> Cheshire, England
    >>

    >



  4. #4
    Ray Proudfoot
    Guest

    Re: CDU Nav Data deselect area doesn't work

    Thanks Bill. I've downloaded and run NavExtract. I don't understand the
    point of the buttons on the CDU because even after deselecting Sth America
    in NavExtract that area still shows as Active in the CDU.

    Perhaps another thing that Enrico has to implement when he has the time.

    Cheers.


    "Bill Trinidad" wrote in message
    news:407328.81263@wb.onvix.com...
    > Hi Ray,
    >
    > I use the NavExtract with the screen shown on PM's NavData page and it
    > works
    >
    > great.
    >
    > I have not tried ( I didn't even know it was possible ) to use any

    buttons
    > on the CDU.
    >
    > Cheers,
    >
    > Bill
    >
    >
    > "Ray Proudfoot" wrote in message
    > news:407286.81263@wb.onvix.com...
    >> Anyone else with this problem???
    >>
    >>
    >>
    >> "Ray Proudfoot" wrote in message
    >> news:406643.81263@wb.onvix.com...
    >>> I'm tying to deselect areas in the nav data I never fly in such as Sth
    >>> America and Pacific. The Nav Data option on the Index page has a Areas
    >>> Select option that displays the 6 areas and currently they're all

    > active.
    >>>
    >>> I would have thought that pressing the button against an entry would
    >>> deselect it but it doesn't. I just see Inop displayed.
    >>>
    >>> Does anyone know if this is meant to work and if so - how?
    >>>
    >>> I'm using build 372 of the CDU.
    >>>
    >>> --
    >>> Regards,
    >>>
    >>> Ray
    >>> Cheshire, England
    >>>

    >>

    >



  5. #5
    Bill Trinidad
    Guest

    Re: CDU Nav Data deselect area doesn't work

    Hi Ray,

    I shall try to add and then remove SA the next time I fly, and will get back

    to you.

    Cheers,

    Bill

    "Ray Proudfoot" wrote in message
    news:407329.81263@wb.onvix.com...
    > Thanks Bill. I've downloaded and run NavExtract. I don't understand the
    > point of the buttons on the CDU because even after deselecting Sth

    America
    > in NavExtract that area still shows as Active in the CDU.
    >
    > Perhaps another thing that Enrico has to implement when he has the time.
    >
    > Cheers.
    >
    >
    > "Bill Trinidad" wrote in message
    > news:407328.81263@wb.onvix.com...
    >> Hi Ray,
    >>
    >> I use the NavExtract with the screen shown on PM's NavData page and it
    >> works
    >>
    >> great.
    >>
    >> I have not tried ( I didn't even know it was possible ) to use any

    > buttons
    >> on the CDU.
    >>
    >> Cheers,
    >>
    >> Bill
    >>
    >>
    >> "Ray Proudfoot" wrote in message
    >> news:407286.81263@wb.onvix.com...
    >>> Anyone else with this problem???
    >>>
    >>>
    >>>
    >>> "Ray Proudfoot" wrote in message
    >>> news:406643.81263@wb.onvix.com...
    >>>> I'm tying to deselect areas in the nav data I never fly in such as Sth
    >>>> America and Pacific. The Nav Data option on the Index page has a Areas
    >>>> Select option that displays the 6 areas and currently they're all

    >> active.
    >>>>
    >>>> I would have thought that pressing the button against an entry would
    >>>> deselect it but it doesn't. I just see Inop displayed.
    >>>>
    >>>> Does anyone know if this is meant to work and if so - how?
    >>>>
    >>>> I'm using build 372 of the CDU.
    >>>>
    >>>> --
    >>>> Regards,
    >>>>
    >>>> Ray
    >>>> Cheshire, England
    >>>>
    >>>

    >>

    >



  6. #6
    Enrico Schiratti
    Guest

    Re: CDU Nav Data deselect area doesn't work

    I think the NAV DATA SELECT just shows which areas are active after
    NavExtract has been used... the > next to the areas is thereby out of
    place.

    Ciao

    Enrico

    "Bill Trinidad" wrote in message
    news:407336.81263@wb.onvix.com...
    > Hi Ray,
    >
    > I shall try to add and then remove SA the next time I fly, and will get
    > back
    >
    > to you.
    >
    > Cheers,
    >
    > Bill
    >
    > "Ray Proudfoot" wrote in message
    > news:407329.81263@wb.onvix.com...
    >> Thanks Bill. I've downloaded and run NavExtract. I don't understand the
    >> point of the buttons on the CDU because even after deselecting Sth

    > America
    >> in NavExtract that area still shows as Active in the CDU.
    >>
    >> Perhaps another thing that Enrico has to implement when he has the time.
    >>
    >> Cheers.
    >>
    >>
    >> "Bill Trinidad" wrote in message
    >> news:407328.81263@wb.onvix.com...
    >>> Hi Ray,
    >>>
    >>> I use the NavExtract with the screen shown on PM's NavData page and it
    >>> works
    >>>
    >>> great.
    >>>
    >>> I have not tried ( I didn't even know it was possible ) to use any

    >> buttons
    >>> on the CDU.
    >>>
    >>> Cheers,
    >>>
    >>> Bill
    >>>
    >>>
    >>> "Ray Proudfoot" wrote in message
    >>> news:407286.81263@wb.onvix.com...
    >>>> Anyone else with this problem???
    >>>>
    >>>>
    >>>>
    >>>> "Ray Proudfoot" wrote in message
    >>>> news:406643.81263@wb.onvix.com...
    >>>>> I'm tying to deselect areas in the nav data I never fly in such as

    Sth
    >>>>> America and Pacific. The Nav Data option on the Index page has a

    Areas
    >>>>> Select option that displays the 6 areas and currently they're all
    >>> active.
    >>>>>
    >>>>> I would have thought that pressing the button against an entry would
    >>>>> deselect it but it doesn't. I just see Inop displayed.
    >>>>>
    >>>>> Does anyone know if this is meant to work and if so - how?
    >>>>>
    >>>>> I'm using build 372 of the CDU.
    >>>>>
    >>>>> --
    >>>>> Regards,
    >>>>>
    >>>>> Ray
    >>>>> Cheshire, England
    >>>>>
    >>>>
    >>>

    >>

    >



  7. #7
    Ray Proudfoot
    Guest

    Re: CDU Nav Data deselect area doesn't work

    Hi Enrico,

    I don't think this feature is working as you describe. Having used
    NavExtract to deselect Sth America I restarted the CDU and the Areas Select

    screen still shows Sth America as active. It's not a major issue - I just
    wanted you to be aware of how it's working.

    Cheers.



    "Enrico Schiratti" wrote in message
    news:409587.81263@wb.onvix.com...
    >I think the NAV DATA SELECT just shows which areas are active after
    > NavExtract has been used... the > next to the areas is thereby out of
    > place.
    >
    > Ciao
    >
    > Enrico
    >
    > "Bill Trinidad" wrote in message
    > news:407336.81263@wb.onvix.com...
    >> Hi Ray,
    >>
    >> I shall try to add and then remove SA the next time I fly, and will get
    >> back
    >>
    >> to you.
    >>
    >> Cheers,
    >>
    >> Bill
    >>
    >> "Ray Proudfoot" wrote in message
    >> news:407329.81263@wb.onvix.com...
    >>> Thanks Bill. I've downloaded and run NavExtract. I don't understand the
    >>> point of the buttons on the CDU because even after deselecting Sth

    >> America
    >>> in NavExtract that area still shows as Active in the CDU.
    >>>
    >>> Perhaps another thing that Enrico has to implement when he has the

    time.
    >>>
    >>> Cheers.
    >>>
    >>>
    >>> "Bill Trinidad" wrote in message
    >>> news:407328.81263@wb.onvix.com...
    >>>> Hi Ray,
    >>>>
    >>>> I use the NavExtract with the screen shown on PM's NavData page and it
    >>>> works
    >>>>
    >>>> great.
    >>>>
    >>>> I have not tried ( I didn't even know it was possible ) to use any
    >>> buttons
    >>>> on the CDU.
    >>>>
    >>>> Cheers,
    >>>>
    >>>> Bill
    >>>>
    >>>>
    >>>> "Ray Proudfoot" wrote in message
    >>>> news:407286.81263@wb.onvix.com...
    >>>>> Anyone else with this problem???
    >>>>>
    >>>>>
    >>>>>
    >>>>> "Ray Proudfoot" wrote in message
    >>>>> news:406643.81263@wb.onvix.com...
    >>>>>> I'm tying to deselect areas in the nav data I never fly in such as

    > Sth
    >>>>>> America and Pacific. The Nav Data option on the Index page has a

    > Areas
    >>>>>> Select option that displays the 6 areas and currently they're all
    >>>> active.
    >>>>>>
    >>>>>> I would have thought that pressing the button against an entry would
    >>>>>> deselect it but it doesn't. I just see Inop displayed.
    >>>>>>
    >>>>>> Does anyone know if this is meant to work and if so - how?
    >>>>>>
    >>>>>> I'm using build 372 of the CDU.
    >>>>>>
    >>>>>> --
    >>>>>> Regards,
    >>>>>>
    >>>>>> Ray
    >>>>>> Cheshire, England
    >>>>>>
    >>>>>
    >>>>
    >>>

    >>

    >



  8. #8
    Enrico Schiratti
    Guest

    Re: CDU Nav Data deselect area doesn't work

    > I don't think this feature is working as you describe. Having used
    > NavExtract to deselect Sth America I restarted the CDU and the Areas
    > Select
    >
    > screen still shows Sth America as active. It's not a major issue - I just
    > wanted you to be aware of how it's working.


    So it is merely the display that isn't active/working?

    Ciao

    Enrico


    > "Enrico Schiratti" wrote in message
    > news:409587.81263@wb.onvix.com...
    >>I think the NAV DATA SELECT just shows which areas are active after
    >> NavExtract has been used... the > next to the areas is thereby out of
    >> place.
    >>
    >> Ciao
    >>
    >> Enrico
    >>
    >> "Bill Trinidad" wrote in message
    >> news:407336.81263@wb.onvix.com...
    >>> Hi Ray,
    >>>
    >>> I shall try to add and then remove SA the next time I fly, and will get
    >>> back
    >>>
    >>> to you.
    >>>
    >>> Cheers,
    >>>
    >>> Bill
    >>>
    >>> "Ray Proudfoot" wrote in message
    >>> news:407329.81263@wb.onvix.com...
    >>>> Thanks Bill. I've downloaded and run NavExtract. I don't understand

    the
    >>>> point of the buttons on the CDU because even after deselecting Sth
    >>> America
    >>>> in NavExtract that area still shows as Active in the CDU.
    >>>>
    >>>> Perhaps another thing that Enrico has to implement when he has the

    > time.
    >>>>
    >>>> Cheers.
    >>>>
    >>>>
    >>>> "Bill Trinidad" wrote in message
    >>>> news:407328.81263@wb.onvix.com...
    >>>>> Hi Ray,
    >>>>>
    >>>>> I use the NavExtract with the screen shown on PM's NavData page and

    it
    >>>>> works
    >>>>>
    >>>>> great.
    >>>>>
    >>>>> I have not tried ( I didn't even know it was possible ) to use any
    >>>> buttons
    >>>>> on the CDU.
    >>>>>
    >>>>> Cheers,
    >>>>>
    >>>>> Bill
    >>>>>
    >>>>>
    >>>>> "Ray Proudfoot" wrote in message
    >>>>> news:407286.81263@wb.onvix.com...
    >>>>>> Anyone else with this problem???
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>> "Ray Proudfoot" wrote in message
    >>>>>> news:406643.81263@wb.onvix.com...
    >>>>>>> I'm tying to deselect areas in the nav data I never fly in such as

    >> Sth
    >>>>>>> America and Pacific. The Nav Data option on the Index page has a

    >> Areas
    >>>>>>> Select option that displays the 6 areas and currently they're all
    >>>>> active.
    >>>>>>>
    >>>>>>> I would have thought that pressing the button against an entry

    would
    >>>>>>> deselect it but it doesn't. I just see Inop displayed.
    >>>>>>>
    >>>>>>> Does anyone know if this is meant to work and if so - how?
    >>>>>>>
    >>>>>>> I'm using build 372 of the CDU.
    >>>>>>>
    >>>>>>> --
    >>>>>>> Regards,
    >>>>>>>
    >>>>>>> Ray
    >>>>>>> Cheshire, England
    >>>>>>>
    >>>>>>
    >>>>>
    >>>>
    >>>

    >>

    >



Similar Threads

  1. HELLO IN BRAZILIAN AREA
    By edersonbilck in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 0
    Last Post: 07-04-2010, 01:11 PM
  2. Any Tampa Area Builders?
    By Buddym in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 2
    Last Post: 02-02-2009, 05:48 PM
  3. Your Area of Operation, or, where do you like flying?
    By Michael Carter in forum Pilots Lounge - Let your Hair down
    Replies: 7
    Last Post: 12-15-2008, 09:46 AM
  4. My ongoing CNC router project - (work area: 2700x1700x200mm)
    By Goose in forum General Builder Questions All Aircraft Types
    Replies: 7
    Last Post: 12-17-2007, 02:07 AM
  5. Re: CDU Nav Data deselect area doesn't work
    By Ray Proudfoot in forum PM General Q & A
    Replies: 0
    Last Post: 02-12-2007, 09:12 AM