Results 1 to 5 of 5
  1. #1
    Peter Parnreiter
    Guest

    pmsystem fuel tank 747

    Hello!
    In 747 lower EICAS, in the fuel page, the volume(wight) in STAB tank seems to
    be the same as the value in the right RES3 tank.
    Is this correct?
    Is it possible to bring the fuel of the STAB Tank to an own offset (there are
    some at 1244 and the following).
    But I think the wights of this Fuel center2 and 3 are not calculated in the
    Total Fuel Sum.

    Can anybody helt me here?
    Thanks a lot
    Peter

    PS: Should the 2 arrorws i the fuel synopsis work?



  2. #2
    Michel Vandaele
    Guest

    Re: pmsystem fuel tank 747

    Hi Peter,
    With what airfile are you working ?
    As here, with the present PMsystem / 747 txt, the fuel pupms led's are on,

    aslong there isn't any fuel in the ctr tank.
    Also when I fuel up the aircraft main 1 and 4 never shows a value ?

    Do you have that experience too ?

    B. rgds
    Michel



    "Peter Parnreiter" wrote in message
    news:389863.78111@wb.onvix.com...
    > Hello!
    > In 747 lower EICAS, in the fuel page, the volume(wight) in STAB tank seems


    > to
    > be the same as the value in the right RES3 tank.
    > Is this correct?
    > Is it possible to bring the fuel of the STAB Tank to an own offset (there


    > are
    > some at 1244 and the following).
    > But I think the wights of this Fuel center2 and 3 are not calculated in
    > the
    > Total Fuel Sum.
    >
    > Can anybody helt me here?
    > Thanks a lot
    > Peter
    >
    > PS: Should the 2 arrorws i the fuel synopsis work?
    >
    >



  3. #3
    Peter Parnreiter
    Guest

    Re: pmsystem fuel tank 747

    Hi
    For the moment the complete 747 fuel system seems not to work. For this
    reason I started to build this pmsystem part for my own. But it seems to be
    impossible (for me) at the moment to pump fuel from stab tank to center tank. I
    dont think that this depends on the air file, because if I change values
    in main3 tank, in the lower eicas also the stab tank volume is changing.
    I use the Model from Pedro Oliveira at the moment, but I have no real
    experiance with different air (Model) files.
    Which do you use?
    Peter



  4. #4
    Michel Vandaele
    Guest

    Re: pmsystem fuel tank 747

    Hi Pete,
    Yes that's what I experience here too.
    As you I'm using also teh Pedro Oliviera one, as this it at the moment the
    most realistic one you can find, as PMDG can't be used.

    Ciao
    Michel



    "Peter Parnreiter" wrote in message
    news:390206.78111@wb.onvix.com...
    > Hi
    > For the moment the complete 747 fuel system seems not to work. For this
    > reason I started to build this pmsystem part for my own. But it seems to
    > be
    > impossible (for me) at the moment to pump fuel from stab tank to center
    > tank. I
    > dont think that this depends on the air file, because if I change values
    > in main3 tank, in the lower eicas also the stab tank volume is changing.
    > I use the Model from Pedro Oliveira at the moment, but I have no real
    > experiance with different air (Model) files.
    > Which do you use?
    > Peter
    >
    >



  5. #5
    Michel Vandaele
    Guest

    Re: pmsystem fuel tank 747

    Hi Peter,
    Can you pls contact me once via my personal mail michelmvd@hotmail.com ?
    Thks
    Michel
    "Michel Vandaele" wrote in message
    news:390214.78111@wb.onvix.com...
    > Hi Pete,
    > Yes that's what I experience here too.
    > As you I'm using also teh Pedro Oliviera one, as this it at the moment

    the
    > most realistic one you can find, as PMDG can't be used.
    >
    > Ciao
    > Michel
    >
    >
    >
    > "Peter Parnreiter" wrote in message
    > news:390206.78111@wb.onvix.com...
    >> Hi
    >> For the moment the complete 747 fuel system seems not to work. For this
    >> reason I started to build this pmsystem part for my own. But it seems to
    >> be
    >> impossible (for me) at the moment to pump fuel from stab tank to center
    >> tank. I
    >> dont think that this depends on the air file, because if I change values
    >> in main3 tank, in the lower eicas also the stab tank volume is changing.
    >> I use the Model from Pedro Oliveira at the moment, but I have no real
    >> experiance with different air (Model) files.
    >> Which do you use?
    >> Peter
    >>
    >>

    >



Similar Threads

  1. Fuel tank selector
    By Jackpilot in forum General Builder Questions All Aircraft Types
    Replies: 2
    Last Post: 03-18-2008, 01:09 PM
  2. Fuel Handle and APU fuel consumption
    By eudoniga in forum PM General Q & A
    Replies: 9
    Last Post: 02-04-2008, 09:59 AM
  3. Fuel Handle - APU Fuel used
    By Thomas Richter in forum PMSystems
    Replies: 12
    Last Post: 09-18-2007, 01:25 AM
  4. Fuel tank switching...don't want to reinvent the wheel
    By JBaymore in forum FS2Phidget Users
    Replies: 0
    Last Post: 05-11-2006, 10:03 AM