Results 1 to 4 of 4
  1. #1
    Ray Proudfoot
    Guest

    Problem with PM Sounds

    I'm having problems with PMSounds v1.0.0.55. This is a sample of the data
    building up in the PM Sounds window...

    FMC Detected
    NetDir set to \\RAYPROUDFOOT\netdir\
    FMC Detected
    FMC Detected
    FMC Detected
    FMC Detected
    FMC Detected
    APU loop activated
    FMC Detected
    Speedbrake loop activated
    [error] Could not set Sound Device 2
    2 Sound Devices Found


    The FMC Detected message is constantly repeated and within a minute of
    starting PM Sounds I lose the WideFS link to FS.

    Question. Why is it reporting 2 sound devices found? Is that part of the
    problem? I have a soundcard on my non-FS PC (the one running PMSounds) and
    one on the FS9 PC.

    After closing PM Sounds WideFs recovers and behaves normally.

    --
    Regards,

    Ray
    Cheshire, England


  2. #2
    Ray Proudfoot
    Guest

    Re: Problem with PM Sounds

    A bit more info on this problem...

    It only occurs when PMSounds is already running and I try to load Flight
    Keeper (a flight monitoring utility). The combined attempts by both programs

    to access FS via WideFS cause it to temporarily hang. If I load Flight
    Keeper and then once it's stabilised load PMSounds then everything is okay.

    But this is a recent problem. I used to load FK after PMSounds had started
    and it was fine.

    Cheers,



    "Ray Proudfoot" wrote in message
    news:388640.77894@wb.onvix.com...
    > I'm having problems with PMSounds v1.0.0.55. This is a sample of the data
    > building up in the PM Sounds window...
    >
    > FMC Detected
    > NetDir set to \\RAYPROUDFOOT\netdir\
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > APU loop activated
    > FMC Detected
    > Speedbrake loop activated
    > [error] Could not set Sound Device 2
    > 2 Sound Devices Found
    >
    >
    > The FMC Detected message is constantly repeated and within a minute of
    > starting PM Sounds I lose the WideFS link to FS.
    >
    > Question. Why is it reporting 2 sound devices found? Is that part of the
    > problem? I have a soundcard on my non-FS PC (the one running PMSounds)

    and
    > one on the FS9 PC.
    >
    > After closing PM Sounds WideFs recovers and behaves normally.
    >
    > --
    > Regards,
    >
    > Ray
    > Cheshire, England
    >



  3. #3
    Enrico Schiratti
    Guest

    Re: Problem with PM Sounds

    > Question. Why is it reporting 2 sound devices found? Is that part of the
    > problem? I have a soundcard on my non-FS PC (the one running PMSounds)

    and
    > one on the FS9 PC.


    It just reports what the system tells it... I have three sound devices
    reported on one PC where there is just one. This was because of an earlier
    request by someone else.

    Ciao

    Enrico


    "Ray Proudfoot" wrote in message
    news:388640.77894@wb.onvix.com...
    > I'm having problems with PMSounds v1.0.0.55. This is a sample of the data
    > building up in the PM Sounds window...
    >
    > FMC Detected
    > NetDir set to \\RAYPROUDFOOT\netdir\
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > FMC Detected
    > APU loop activated
    > FMC Detected
    > Speedbrake loop activated
    > [error] Could not set Sound Device 2
    > 2 Sound Devices Found
    >
    >
    > The FMC Detected message is constantly repeated and within a minute of
    > starting PM Sounds I lose the WideFS link to FS.
    >
    > Question. Why is it reporting 2 sound devices found? Is that part of the
    > problem? I have a soundcard on my non-FS PC (the one running PMSounds)

    and
    > one on the FS9 PC.
    >
    > After closing PM Sounds WideFs recovers and behaves normally.
    >
    > --
    > Regards,
    >
    > Ray
    > Cheshire, England
    >



  4. #4
    Ray Proudfoot
    Guest

    Re: Problem with PM Sounds


    reported on one PC where there is just one. This was because of an earlier
    request by someone else.>>

    Oh, okay. I don't think that is responsible for the problem but I don't like

    seeing any error messages. I'm getting around the problem by manually
    loading PMSounds after everything else is loaded.

    Thanks.


Similar Threads

  1. PM Sounds
    By Geremy Britton in forum Cockpit Sounds
    Replies: 11
    Last Post: 12-06-2007, 05:45 PM
  2. Om-Sounds
    By hercules in forum Cockpit Sounds
    Replies: 1
    Last Post: 11-28-2007, 01:14 PM
  3. Re: Problem with PM Sounds
    By Ray Proudfoot in forum PM General Q & A
    Replies: 1
    Last Post: 02-12-2006, 01:31 PM
  4. Sounds
    By Andras in forum FS2Phidget Users
    Replies: 7
    Last Post: 02-22-2005, 03:35 PM