Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Eddie Armaos
    Guest

    About TCAS in GC

    Sorry, maybe i'm doing something wrong, but i don't have TCAS in my GC in
    ND
    display.

    I run in the FS PC the Fsinn for Vatsim's multiplayer, do i need something
    more?
    Does anyone else have Fsinn ?


    Thanks

    Eddie




  2. #2
    Enrico Schiratti
    Guest

    Re: About TCAS in GC

    Hi,

    I do not know what Fsinn is, but if you get TCAS with normal
    FS, then it must be a setting in the Vatsim client that has
    to be set.

    Ciao

    Enrico

    "Eddie Armaos" wrote in message
    news:383724.77021@wb.onvix.com...
    > Sorry, maybe i'm doing something wrong, but i don't have
    > TCAS in my GC in
    > ND
    > display.
    >
    > I run in the FS PC the Fsinn for Vatsim's multiplayer, do
    > i need something
    > more?
    > Does anyone else have Fsinn ?
    >
    >
    > Thanks
    >
    > Eddie
    >
    >
    >



  3. #3
    Thomas Richter
    Guest

    About TCAS in GC

    Hi Eddie,
    FSInn needs AiBridge, normaly it will install and activate automaticly by
    installing FSInn.
    In my case I got trobble with AiBridge and PM. Suddenly I lost "NetDir", no
    PMSoftware could find NetDir only CDU could write to it.
    Removed FSInn / AiBridge and switched back to SquawkBox 3.04. Now all is
    working well, also Traffic is working.

    Best Regards
    Thomas Richter


  4. #4
    Enrico Schiratti
    Guest

    Re: About TCAS in GC

    > In my case I got trobble with AiBridge and PM. Suddenly I
    > lost "NetDir", no
    > PMSoftware could find NetDir only CDU could write to it.


    How does that manifest itself? I mean, when does the NetDir
    get lost?


  5. #5
    Thomas Richter
    Guest

    Re: About TCAS in GC

    Hi Enrico,
    it lost direct on startup. It started with one of the GC433X-software and now
    I know with latest update of FSInn.
    But I think it has nothing to do with PM-software, because before I removed
    FSInn / AiBridge I tried to go back to older GC, down to 428 step by step,
    but NetDir was lost for GC (still there and write in from CDU).
    Then I found out that FSInn automaticly starts AiBridge when FS2004 is
    starting, so that AiBridge is every tim running in background without needing
    (not online).
    Then I closed AiBridge and in this moment GC showes the correct Data from
    Netdir.

    Best Regards
    Thomas Richter


  6. #6
    Brad Heller
    Guest

    Re: About TCAS in GC

    Guys,

    I've just started running FS.INN because I can't get Squawkbox to work, even
    with help from the SB Forums. I run all the PM software and haven't had a
    problem.

    Enrico, the only issue I have at the moment is that I can't get the EICAS
    display show in the display with the Stby's and the EICAS display by itself.
    Its just disappeared for some reason? I even disabled the dimming without
    any result. The GC & ND displays just work fine.

    Kind Regards,
    Brad Heller.


  7. #7
    Eddie Armaos
    Guest

    RE: About TCAS in GC

    I can confirm that Fsinn automatic starts a AiBridge.exe in main Fs PC. The
    truth is that after Fsinn installation when Fs starts auto run also Fsinn
    and Aibridge.
    I tried to manually run it in GC PC, but with n o success.
    I have the latest Fsinn version



    With Squawkbox I don't have a problem, I can see TCAS in ND


    Thanks


    Eddie




  8. #8
    Enrico Schiratti
    Guest

    Re: About TCAS in GC

    > Then I closed AiBridge and in this moment GC showes the
    > correct Data from
    > Netdir.


    Can it be that something is messing around with our offsets?

    What do you get from pmFileCheck in that constellation?


  9. #9
    Enrico Schiratti
    Guest

    EICAS Display

    > Enrico, the only issue I have at the moment is that I
    > can't get the EICAS
    > display show in the display with the Stby's and the EICAS
    > display by itself.
    > Its just disappeared for some reason? I even disabled the
    > dimming without
    > any result. The GC & ND displays just work fine.


    I haven't observed that here, but I have a little problem
    with the elecoff offset, I think. Please check with the new
    GC in the latest folder, it has a new DLL.

    Ciao

    Enrico


  10. #10
    Thomas Richter
    Guest

    Re: About TCAS in GC

    Hi Enrico,
    this file was written when I was going back step by step.
    The Problems Date was 8.01.2006.
    Yesterday I tried a new installation of FSInn for tests (FSInn is better than
    SquawkBox), result:
    All PM is working without problems, but ND and QuickMap don`t show TCAS when
    online.
    The different to before was that I start AiBridge, PM is allready started.
    I think FSInn is working with "Long Fingers", once yesterday when I started
    FSInn it shoot GoFlight-AP half away (Displays OK, Buttons dead).
    Sometimes less is more, back to SquawkBox (all OK).

    pmFileCheck Build 36
    Opening Connections

    Local Path: C:\PFD-747\PFD

    Checking Computer and User Name
    Local Computer Name: P4-PFD-3000
    Local User Name: Administrator


    FSUIPC/WideFS found!
    FSUIPC Version 3.53
    WideServer Version 6.51
    ?Possible WideServer/WideClient Version Mismatch (WideClient Version 0.00)

    Flight Simulator Running
    Testing Framerate
    Avg / Min / Max: 30.6 / 16.8 / 37.7

    OK - GC Detected
    GC Build 432

    FAIL - FMC Not Detected (CDU or MCDU)

    FAIL - A/P NOT Detected (MCP or FCU)

    Local DLL Files Found:
    PFD.dll dated: 08.12.2005 19:14:00
    pm.dll dated: 22.12.2005 12:00:19

    Checking FS Path
    OK - Reported FS Path \\P4-FS-3200\FS2004\

    Trying to access FS Path
    OK - Read access to FS Path
    OK - Read/Write access to FS Path
    OK - Read/Write access to FS Path

    Wide Server reports:
    92641 Connected to computer "P4-EICAS-2400" running WideClient version 6.510
    (skt=1290
    92672 Connected to computer "AMD-HARDWARE" running WideClient version 6.510
    (skt=12920)
    92672 Connected to computer "AMD-FMC" running WideClient version 6.510
    (skt=12932)
    93688 Connected to computer "P4-PFD-3000" running WideClient version 6.510
    (skt=1294
    670860 Connected to computer "P4-EICAS-2400" running WideClient version
    6.510 (skt=12992)
    1558047 Connected to computer "P4-EICAS-2400" running WideClient version
    6.510 (skt=352)
    2016172 Connected to computer "P4-EICAS-2400" running WideClient version
    6.510 (skt=13120)
    2404266 Connected to computer "P4-PFD-3000" running WideClient version 6.510
    (skt=13052)
    3140797 Connected to computer "AMD-PHIDGETS" running WideClient version
    6.510 (skt=1302
    3500110 Connected to computer "P4-EICAS-2400" running WideClient version
    6.510 (skt=13124)
    3851204 Connected to computer "P4-PFD-3000" running WideClient version 6.510
    (skt=372)

    Looking for NETDIR from CDU

    FAIL - Can't check NETDIR path, CDU/MCDU is not running
    > Please run the CDU/MCDU for this test


    Checking FSPLANS Path (To Load/Save FS Flightplans)
    OK - Read/Write access to FSPLANS Shared Folder
    10 File(s) found in FSPLANS, last date is 08.01.2006 21:28:34

    Closing Everything

    08.01.2006 23:06:34

    Things To Do:

    * Check Versions of WideClient

    If you wish to, please check www.projectmagenta.com/notams.html

    Best Regards
    Thomas Richter


Page 1 of 3 123 LastLast

Similar Threads

  1. TCAS on PM
    By JWS in forum PM Boeing GC
    Replies: 5
    Last Post: 02-17-2008, 02:21 PM
  2. TCAS on PM
    By JWS in forum PM General Q & A
    Replies: 5
    Last Post: 02-17-2008, 02:21 PM
  3. TCAS Switch ?
    By eudoniga in forum PM General Q & A
    Replies: 6
    Last Post: 09-19-2007, 07:17 AM
  4. tcas
    By bindook in forum Dodiano's Airbus Forum
    Replies: 2
    Last Post: 05-25-2007, 02:06 PM
  5. TCAS
    By David Rabiner in forum PM General Q & A
    Replies: 0
    Last Post: 02-01-2005, 12:45 PM