Results 1 to 7 of 7

Thread: PMRJ, Build 70

  1. #1
    Elisio Cruz
    Guest

    PMRJ, Build 70

    HI, PM People !

    I have a PMRJ and it worked very well. Yesterday, I made th eupdate of the
    Wide FS, FSUIPC and of the PMRJ ( build 70 ). After that, the PMRJ stopped
    working: It opens as a black screen and theh computer freezes. What is wrong
    ?

    Thanks,

    Elisio

    NOTE: below is my PMFilecheck:

    pmFileCheck Build 36
    Opening Connections

    Local Path: C:\pmRJ3

    Checking Computer and User Name
    Local Computer Name: MICRO
    Local User Name: Administrador

    !! FSUIPC/WideFS NOT found.
    Please run either program so the system can be tested.

    Can't check FSPLANS path
    > Please share the FS flightplan folder as FSPLANS and share your main FS

    path over the network.

    Closing Everything

    1/9/2006 9:10:15 AM

    Things To Do:

    * Run/Install FSUIPC and WideFS
    * Share FS Flightplan folder over the NetWork as FSPLANS

    If you wish to, please check www.projectmagenta.com/notams.html


  2. #2
    Katy Pluta
    Guest

    Re: PMRJ, Build 70

    How did you update the programs? Is Wideclient running when you run
    pmfilecheck?

    ===
    All the best!
    Katy Pluta, MS_MVP for Flight Simulator
    http://mvp.support.microsoft.com

    ---
    Visit Project Magenta!
    http://www.projectmagenta.com


  3. #3
    Elisio Cruz
    Guest

    Re: PMRJ, Build 70

    Yes, Kate, all the programs are updated.

    No, It is impossible to ram pmfilecheck together with wideclient because it
    freezes as soon the wideclient starts. Thw wideclient gives the information
    "connected" , PMRJ open as a black screen and the PC hangs up. If you press
    ctrl-alt-del you can see that the wideclient has 99% CPU usage

    Complementing I just found out, in "WideClient Log":

    1192 connection made ok !
    3063 new client application; pmsounds (ID=3492)
    8623 block sequence error: expected 135 but received 136

    Elisio


  4. #4
    Katy Pluta
    Guest

    Re: PMRJ, Build 70

    Please make sure that wideclient matches the wideserver version in FS?

    ===
    All the best!
    Katy Pluta, MS_MVP for Flight Simulator
    http://mvp.support.microsoft.com

    ---
    Visit Project Magenta!
    http://www.projectmagenta.com


  5. #5
    Enrico Schiratti
    Guest

    Re: PMRJ, Build 70

    Hi Elisio,

    please run pmFileCheck to verify the connection, if you do
    not have the program in your RJ folder, you can find it on
    www.projectmagenta.com/updates.html

    Ciao

    Enrico

    "Elisio Cruz" wrote in message
    news:380416.76304@wb.onvix.com...
    > Yes, Kate, all the programs are updated.
    >
    > No, It is impossible to ram pmfilecheck together with
    > wideclient because it
    > freezes as soon the wideclient starts. Thw wideclient
    > gives the information
    > "connected" , PMRJ open as a black screen and the PC hangs
    > up. If you press
    > ctrl-alt-del you can see that the wideclient has 99% CPU
    > usage
    >
    > Complementing I just found out, in "WideClient Log":
    >
    > 1192 connection made ok !
    > 3063 new client application; pmsounds (ID=3492)
    > 8623 block sequence error: expected 135 but received 136
    >
    > Elisio
    >



  6. #6
    Elisio Cruz
    Guest

    Re: PMRJ, Build 70

    Kate, Enrico,

    the version of the WideClient is the same. Besides that, I've just run the
    PMRJ alone to see what happens: there is a window open with the following
    information:"RJGLASSCOCKPIT: Run Time error "11": Division by zero, and the
    key "OK".

    Being this way, I think th eproblem is with the PMRJ. What do you think?


  7. #7
    Enrico Schiratti
    Guest

    Re: PMRJ, Build 70

    > the version of the WideClient is the same. Besides that,
    > I've just run the
    > PMRJ alone to see what happens: there is a window open
    > with the following
    > information:"RJGLASSCOCKPIT: Run Time error "11": Division
    > by zero, and the
    > key "OK".
    >
    > Being this way, I think th eproblem is with the PMRJ. What
    > do you think?


    The overflow comes from the graphics card driver... which
    card is it? (did you recently update the driver?), can you
    e-mail us your PMRJ.INI file? support@projectmagenta.com


Similar Threads

  1. PMRJ Build 90 report
    By Tomlin in forum PM RJ GC
    Replies: 1
    Last Post: 08-25-2008, 08:45 PM
  2. PMRJ Wish
    By Marc Nieuwhof in forum PM General Q & A
    Replies: 1
    Last Post: 01-16-2006, 04:34 AM
  3. PMRJ, Build 70
    By Elisio Cruz in forum PM General Q & A
    Replies: 1
    Last Post: 01-09-2006, 11:46 AM
  4. pmRJ Questions
    By Richard Lester in forum PM General Q & A
    Replies: 1
    Last Post: 02-01-2005, 11:31 AM
  5. pmRJ 48b
    By Thomas Richter in forum PM General Q & A
    Replies: 2
    Last Post: 11-21-2004, 03:11 PM