Results 1 to 3 of 3

Thread: MCDU V3 Win10 Build 1903

  1. #1
    25+ Posting Member
    Join Date
    Nov 2008
    Location
    W黵zburg
    Posts
    68

    MCDU V3 Win10 Build 1903

    Hello did any have the same probleme with the sioc-creator and the MCDU V3?
    After starting the sioc-creator and fill in the path of sioc and the number of the key (i found it at the sioc).
    But it doesn磘 work.
    Can anyone help
    best regards
    peter

  2. #2
    25+ Posting Member
    Join Date
    Nov 2008
    Location
    W黵zburg
    Posts
    68

    Re: MCDU V3 Win10 Build 1903

    The ConfigUSBKey.ssi
    // *****************************************************************************
    // * Config_SIOC ver 5.1 - By Manuel Velez - www.opencockpits.com
    // *****************************************************************************
    // * FileName : sioc.txt
    // * Date : 11.08.2019






    Var 0001, name key, Link USB_KEYS, Device 12

    The sioc.ini
    [ fichero de configuracion para el SIOC ver. 5.0 ]
    [ Configuration file for SIOC ]




    [************** SIOC ***************]


    [ Nombre asignado al SIOC ]
    [ SIOC name ]
    Name=MAIN_SIOC


    [ Puerto del servidor IOCP ]
    [ IOCP port ]
    IOCP_port=8092


    [ Tiempo de respuesta m谩ximo de los paquetes IOCP ]
    [ IOCP Timeout ]
    IOCP_timeout=3500


    [ Arranque minimizado en la barra ]
    [ Start minimized in tray ]
    Minimized=No


    [ Retraso necesario para las variables toggles (Project Magenta)]
    [ Deley needed for var. toggles (Project Magenta) ]
    Toggle_delay=20


    [ Fichero de configuracion ]
    [ Configuration File ]
    CONFIG_FILE=.\ConfigUSBkeys.ssi


    [************** VIRTUAL DEVICES ***************]


    [ Habilita recepcion de Dispositivos Virtuales yes/no ]
    [ Enable Receive Virtual Devices yes/no ]
    Vdevices_enable=No


    [ Tiempo de espera para carga inicial de Dispositivos Virtuales (ms)]
    [ Wait time for load Virtual Devices (ms)]
    Vdevices_wait=2000


    [ Modo Esclavo para SIOC como servidor de dispositivos yes/no ]
    [ Slave mode for SIOC Virtual Devices Server yes/no ]
    Vdevices_slave=No




    [ Host y Puerto del SIOC donde reenviar los Dispositivos ]
    [ SIOC Host/Port to resent Devices ]
    Vdevices_host=192.168.1.5
    Vdevices_port=8092




    [************** MONITOR MODULE ***************]


    [ Desabilitar monitorizacion remota del SIOC ]
    [ Remote monitor disable mode yes/no ]
    Monitor_disable=No


    [ Refresco broadcast monitor (en segundos) ]
    [ Broadcast monitor time (seconds) ]
    Monitor_time=2




    [************** IOCARDS MODULE ***************]


    [ Desactivar el m贸dulo de las IOCards ]
    [ Disable IOCards module ]
    IOCard_disable=No


    [ Divisor de frecuencia para los ejes analogicos (1-999). Retarda la entrega de valores. ]
    [ Frequency divisor for delay the analogic axes. (1-999)]
    Divisor_AD=10


    [------------- CARDS CONFIG -------------]


    [ IOCard Master ]
    [...............]


    [ Spanish : ]


    [ MASTER=(Indice device),(Tipo),(N煤mero de tarjetas),(N煤mero device) ]


    [ Indice Device: 脥ndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
    [ Se usa 0 en el caso de que s贸lo haya una tarjeta y no se tenga en cuenta el n煤mero de device, por defecto un script en SIOC cuando no se pone par谩metro DEVICE, se hace referencia al 铆ndice 0]


    [ tipo = 0 : Emulador de Master Card // OBSOLETO ]
    [ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente // OBSOLETO ]
    [ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad // OBSOLETO ]
    [ tipo = 3 : Placa de expansi贸n por puerto paralelo // OBSOLETO ]
    [ tipo = 4 : Tarjeta USBExpansion usada ]
    [ tipo = 5 : Modulo MCP de Opencockpits ]
    [ tipo = 6 : Tarjeta USBOutputs ]
    [ tipo = 7 : Modulo EFIS de Opencockpits ]
    [ tipo = 8 : Modulo Radio COM de Opencockpits ]
    [ tipo = 9 : Modulo Radio NAV de Opencockpits ]
    [ tipo = 10 : Modulo Radio ADF de Opencockpits ]
    [ tipo = 11 : Modulo Radio ATC de Opencockpits ]
    [ tipo = 12 : Modulo Radio Airbus RMP de Opencockpits ]
    [ tipo = 13 : Modulo FMC-737 de Opencockpits ]
    [ tipo = 14 : Tarjeta USBDcmotorPLUS ]
    [ tipo = 15 : Modulo MCP V3 de Opencockpits ]
    [ tipo = 16 : Modulo CRONOMETRO B737 ]
    [ tipo = 17 : Tarjeta USBDimcontrol ]
    [ tipo = 18 : Modulo Audio B737 ]
    [ tipo = 19 : Modulo FIRE ENGINES B737 ]
    [ tipo = 20 : Modulo PEDESTAL B737 ]




    [ N煤mero de tarjetas = N煤mero de placas Master usadas, 1 a 4 para uso de placas de expansi贸n, 1 para conexi贸n de placa Master directa o del Emulador ]


    [ N煤mero de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Direcci贸n del puerto paralelo (por ejemplo $037, o n煤mero de dispositivo USB ]




    [ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
    [ MASTER=0,4,3,22 ]
    [ MASTER=1,4,2,24 ]


    [ Un ejemplo de conexi贸n a simulador ]
    [ MASTER=0,0,1,0 ]




    [ English : ]


    [ MASTER=(Device index),(Type),(Number of cards),(Device number) ]


    [ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
    [ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


    [ type = 0 : Master Card Emulator // OBSOLETE ]
    [ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
    [ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
    [ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
    [ type = 4 : USBExpansion Card used ]
    [ type = 5 : Opencockpits MCP module ]
    [ type = 6 : USBOutputs Card used ]
    [ type = 7 : EFIS module ]
    [ type = 8 : Radio COM module ]
    [ type = 9 : Radio NAV module ]
    [ type = 10 : Radio ADF module ]
    [ type = 11 : Radio ATC module ]
    [ type = 12 : Radio RMP Airbus module ]
    [ type = 13 : FMC-737 module ]
    [ type = 14 : USBDCmotorPLUS Card used ]
    [ type = 15 : MCP V3 module ]
    [ type = 16 : CHRONO B737 module ]
    [ tipo = 17 : USBDimcontrol card used ]
    [ tipo = 18 : Audio B737 module ]
    [ tipo = 19 : FIRE ENGINES B737 module ]
    [ tipo = 20 : PEDESTAL B737 module ]


    [ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]


    [ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]


    [ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
    [ MASTER=0,4,3,22 ]
    [ MASTER=1,4,2,24 ]


    [ For example, use of Master card emulator ]
    [ MASTER=0,0,1,0 ]


    [ Use the first USBExpansion card connected with only one Master Card attached ]
    [ Esta definici贸n es para usar la primera tarjeta USBExpansion que se encuentre instalada que adem谩s llevar谩 conectada una placa Master ]


    [MASTER=3,6,1,252]
    [MASTER=0,4,1,0]
    [MASTER=0,12,1,0]
    [MASTER=20,20,2,1055]


    [ Others Cards / Otras tarjetas ]
    [...............................]


    [ Spanish : ]


    [ Nombre_de_tarjeta=(Indice device),(N煤mero device) ]


    [ Indice Device: 脥ndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
    [ Se usa 0 en el caso de que s贸lo haya una tarjeta y no se tenga en cuenta el n煤mero de device, por defecto un script en SIOC cuando no se pone par谩metro DEVICE, se hace referencia al 铆ndice 0]


    [ N煤mero de device = 0 para usar primera tarjeta USB de este tipo detectada 贸 n煤mero de dispositivo USB ]




    [ English : ]


    [ Name_of_card=(Device index),(Device number) ]


    [ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
    [ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


    [ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]


    [ Ejemplo de dos USBServos en indices 0 y 1, y n煤meros de devices 17 y 23 ]
    [ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]


    [ USBServos=0,17 ]
    [ USBServos=1,23 ]




    [USBStepper=0,0]
    [USBKeys=0,0]
    [USBServos=0,0]
    [USBRelays=0,0]
    [USBDCmotor=0,0]


    [ Para los ejes anal贸gicos se usan los n煤meros de devices de las tarjetas donde est谩n alojados ]
    [ For analogic axles, you use the device number of cards what allow the axles ]


    [USBAnalogic=0,0]




    [************** FSUIPC MODULE ***************]


    [ Desabilitar lectura de las FSUIPC ]
    [ FSUIPC disable mode yes/no ]
    FSUipcdisable=No


    [ Refresco recepci贸n FSUIPC ]
    [ FSUIPC refresh ]
    FSUipcRefresh=50




    [************** IOCP CLIENTS MODULES ***************]


    [ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
    [ Delay for initialization when client has been connected in mseconds ]
    IOCPini_delay=0


    [************** IOCP CLIENT MODULE #0 ***************]


    [ Desactivar el m贸dulo cliente IOCP ]
    [ Disable IOCP client module ]
    IOCPclient0_disable=Yes


    [ IP del servidor donde debe de conectar el cliente ]
    [ IOCP client host name ]
    IOCPclient0_host=LOCALHOST


    [ Puerto de envio del protocolo IOCP cliente ]
    [ IOCP client port ]
    IOCPclient0_port=8099




    [************** IOCP CLIENT MODULE #1 ***************]


    [ Desactivar el m贸dulo cliente IOCP ]
    [ Disable IOCP client module ]
    IOCPclient1_disable=Yes


    [ IP del servidor donde debe de conectar el cliente ]
    [ IOCP client host name ]
    IOCPclient1_host=LOCALHOST


    [ Puerto de envio del protocolo IOCP cliente ]
    [ IOCP client port ]
    IOCPclient1_port=8099




    [************** SOUND MODULE ***************]


    [ Ficheros de sonido ]
    [ Sound Files ]


    [ Desactivar el m贸dulo de sonido ]
    [ Disable Sound module ]
    Sound_disable=Yes


    [ Volumen general de los sonidos 0-100 ]
    [ Master Volume 0-100 ]
    Volume=100




    [ put '*' first filename for loop Sound ]
    [ anteponer '*' en el fichero para bucle continuo de sonido]


    [ Sound=wav_file,frequency,volume,pan ]
    [ frequency=100 to 100000 0=original -1=current ]
    [ volume=0 to 100, -1=current ]
    [ pan=-100 (left) to +100 (right) 0=center -1=current ]


    [ Sound=Fichero_wav,frecuencia,volumen,balance ]
    [ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
    [ volumen=0 hasta 100 -1=Volumen por defecto ]
    [ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]


    [ #1 ]
    Sound=APDis.wav,-1,-1,-1


    [ #2 ]
    Sound=*outermk.wav,-1,-1,-1


    [ #3 ]
    Sound=*hello.wav


    [************** KEYBOARD EMULATOR MODULE ***************]


    [ Nombre exacto de la ventana donde se enviar谩n las teclas ]
    [ Name of window for key send ]
    [window = "Project Magenta Glass Cockpit - Build 396" ]


    window =a.txt - Bloc de notas




    [ Asignaci贸n de teclas ]
    [ assign youe keys ]


    #1=A
    #2=B
    #3=C
    #4=D
    #5=E
    #6=F
    #7=G
    #8=H
    #9=I
    #10=J
    #11=K
    #12=L
    #13=M
    #14=N
    #15=O
    #16=P
    #17=Q
    #18=R
    #19=S
    #20=T
    #21=U
    #22=V
    #23=W
    #24=X
    #25=Y
    #26=Z
    #27=1
    #28=2
    #29=3
    #30=4
    #31=5
    #32=6
    #33=7
    #34=8
    #35=9
    #36=0
    #37=<
    #38=,
    #39=.
    #40=-
    #41=*
    #42=+
    #43=//
    #44=/0
    #45=/1
    #46=/A
    #47=<T
    #48=
    #49=
    #50=
    #51=
    #52=
    #53=
    #54=
    #55=
    #56=
    #57=
    #58=
    #59=
    #60=
    #61=
    #62=
    #63=
    #64=
    #65=
    #66=
    #67=
    #68=
    #69=
    #70=
    #71=
    #72=
    #73=
    #74=
    #75=
    #76=
    #77=
    #78=
    #79=
    #80=
    #81=
    #82=
    #83=
    #84=
    #85=
    #86=
    #87=
    #88=<a
    #200=B


    [ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:14:54 <== ----]
    [USBKeys=9,9]






    [ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:53:56 <== ----]
    [USBKeys=9,4]


    [ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:54:07 <== ----]
    [USBKeys=4,4]


    [ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 14:00:39 <== ----]
    [USBKeys=12,4]


    [ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 14:08:40 <== ----]
    USBKeys=12,4


    Hey i hoppe anyone can help me!
    Best regards
    peter
    Attached Images Attached Images

  3. #3
    25+ Posting Member
    Join Date
    Nov 2008
    Location
    W黵zburg
    Posts
    68

    Re: MCDU V3 Win10 Build 1903

    Hey Folks! I have done by my own!
    I found the right way!
    Sorry
    Peter