Results 1 to 5 of 5

Thread: No slats/flaps configuration possible in FMGS_config

  1. #1
    25+ Posting Member
    Join Date
    Apr 2013
    Location
    europe
    Posts
    55

    No slats/flaps configuration possible in FMGS_config

    hi guys,

    i am using skalarki hardware and jeehell 52.0
    inside profiler 5 everything works fine, in the i/O testing i get indications (changing numbers) of slat and flap-lever,
    server is the fsx computer and this is inserted there, the correct hardware-selection (year) is chosen.
    but back in jeehell there is no movement indication in the fmgs_config when i want to configure the levers (profiler is running).

    do you have any idea how to solve the situation ?

    cheers, Fabiano

  2. #2
    150+ Forum Groupie
    Join Date
    Oct 2013
    Location
    Germany
    Posts
    177

    Re: No slats/flaps configuration possible in FMGS_config

    Try to do this

    Start FSX
    Start Profiler (Stop Mode)

    Start FMGS starten (Server und Client)
    Profiler > Run
    Shut FMGS Server
    Start FMGS_config.exe
    Configure the levers

    Hope it will work!
    Ciao, René

  3. #3
    25+ Posting Member
    Join Date
    Apr 2013
    Location
    europe
    Posts
    55

    Re: No slats/flaps configuration possible in FMGS_config

    thanks rené,

    i tried a few times and got the followings errors while working your list (picture below).
    do you mean to close the fmgs_server (where all parts are shown which are connected or disconnected) or the wide_fmgs_server ?
    if i do not start fmgs (jeehell) i can open the sidestick/thr/slats/flaps configuration without an error.

    cheers, fabiano
    Attached Images Attached Images

  4. #4
    150+ Forum Groupie
    Join Date
    Oct 2013
    Location
    Germany
    Posts
    177

    Re: No slats/flaps configuration possible in FMGS_config

    I mean to close the starter.exe linked to starter.ini which starts with

    [Starter]
    FMGS_Server=yes

    But I have to admit that I configured only my / Skalarki's TQ. With my proceeding I was finally successful - after a while!!

    cheers, René

  5. #5
    25+ Posting Member
    Join Date
    Apr 2013
    Location
    europe
    Posts
    55

    Re: No slats/flaps configuration possible in FMGS_config

    probleme is solved ... thanks.

    for all of you, who are interested, how to do :
    first go to skalarki profiler and enter all data you have to enter. than got to "edit profile" and look for e.g. lower pedestral and search the inputs and e.g. flaps and speedbrake. define the range and save. go to jeehell and there to the fmgs-config, configure the ranges again there. don´t forget to play with error-value in % and everything should work