Page 15 of 34 FirstFirst ... 511121314151617181925 ... LastLast
Results 141 to 150 of 331

Thread: A320 FMGS B50

  1. #141
    25+ Posting Member
    Join Date
    Jan 2011
    Location
    Paris, FRANCE
    Posts
    53
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Hi Omar,


    Waaooooooooooh....
    I will try to bring you several answers.......


    Your "1st topic" issue :
    Seems to be a known Windows 10 version 1803 issue.
    Have a look to Microsoft forums, for example : https://answers.microsoft.com/en-us/...5-ecce2895b250

    I don't use PS4 / Xbox, so I don't know about any disturb... Try to unplug them during your testings...


    Network : What is 10.0.0.138 ??


    VERY IMPORTANT : Before installing any JeeHell software, you must check all your Windows network is completely available and stable.
    Otherwise you will get problems and you will not be able to find their cause(s)...


    Your "2nd topic" issue :
    1 - Yes ! ==> JeeHell FMGS doesn't use FSUIPC, but FSUIPC is used by SKALARKI Profiler when you will install it ; then it's necessary to install FSUIPC support module..
    2 - FMGS_Config has been built for this ==> Use it to calibrate Logitech and Saitek hardware, as described in the Installation Guide.
    3 - Yes of course ! ==> Your settings are saved in 2 files, no matter about this...


    About starting the software :
    1 - Run P3D,
    2 - Run starter.exe as administrator on the P3D PC, check FMGS_Server connected to P3D.
    3 - Run starter.exe as administrator on the other PC, check the modules connected to FMGS_Server.


    About CFM/IAE aircraft and coefficients :
    JeeHell FMGS software simulates 2 A320 different models (A320-214 and A320-233). You choose the model you want to use... ==> There are some differences but for a first installation, I think its'better to let the CFM default.
    Look at Installation Guide chapter 5.7 : "Only advanced user should change the model and/or the AP/FBW coefficients" ==> At this time, make your simulator work with the default parameters..., and wait to get more and more experience before changing any parameters


    At the end, if ALL is now able to work fine and stable, you can run SKALARKI Profiler.
    Let time enough to each software to completely be connect :
    1 - FMGS_Server to P3D,
    2 - FMGS modules to FMGS_Server,
    3 - SKALARKI Profiler to FMGS_Server.


    Hope all this will help you
    Michel

  2. #142
    150+ Forum Groupie
    Join Date
    Aug 2013
    Location
    eddn
    Posts
    210
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Hello Jeehell,

    It would be very nice, when you can help me or give a reply.
    Since today i had a very big issue. On the afternoon i made a testflight and all works fine (without the problem that i allready wrote)
    This evening i like to fly my every thursday evening online flight on ivao. StartUp Procedure all fine. Starting engines... check. Flightcontrols... failed! FMGS recognizes the Joystick inputs (see it on the PFD etc.) but on the EICAS displayed nothing. Take Thrust to FLX/MCT The Dot raises but there is no thrust. The plane don´t move.
    You can see it in the Video above.
    Restart 4 times all computers... Still the same. ((( After over one hour restart and start up the software i gave up.
    What i see is that the AP/FBW Server Disconnected and Connected everytime.
    Now I am very sad because I have absolutely no idea what´s the problem. Everything was still going on this afternoon.

    Hope you will and can help.

    Kind regards
    Florian

    Here´s the Video: https://youtu.be/J_XissAkb2k

  3. #143
    25+ Posting Member
    Join Date
    Sep 2015
    Location
    Germany
    Posts
    38
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Quote Originally Posted by Leonidas View Post
    Probably same issue: Little by little altitude is going down and after a while GRZ ALT dissapeared! Same if Temperature effect is NO or YES.
    Same here!
    Best regards
    Karsten

  4. #144
    25+ Posting Member
    Join Date
    Nov 2008
    Location
    Würzburg
    Posts
    68
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Quote Originally Posted by tcane View Post
    Hello Jeehell,

    It would be very nice, when you can help me or give a reply.
    Since today i had a very big issue. On the afternoon i made a testflight and all works fine (without the problem that i allready wrote)
    This evening i like to fly my every thursday evening online flight on ivao. StartUp Procedure all fine. Starting engines... check. Flightcontrols... failed! FMGS recognizes the Joystick inputs (see it on the PFD etc.) but on the EICAS displayed nothing. Take Thrust to FLX/MCT The Dot raises but there is no thrust. The plane don´t move.
    You can see it in the Video above.
    Restart 4 times all computers... Still the same. ((( After over one hour restart and start up the software i gave up.
    What i see is that the AP/FBW Server Disconnected and Connected everytime.
    Now I am very sad because I have absolutely no idea what´s the problem. Everything was still going on this afternoon.

    Hope you will and can help.

    Kind regards
    Florian

    Here´s the Video: https://youtu.be/J_XissAkb2k
    Sorry but your video does not work?
    Best regards
    peter

  5. #145
    150+ Forum Groupie
    Join Date
    Aug 2013
    Location
    eddn
    Posts
    210
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Quote Originally Posted by pmartin View Post
    Sorry but your video does not work?
    Best regards
    peter
    Ohh sorry, it was private. Thanks for the hint! Should be work now.

  6. #146
    2000+ Poster - Never Leaves the Sim
    Join Date
    Mar 2008
    Location
    France,Nice
    Posts
    2,652
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Quote Originally Posted by tcane View Post
    Ohh sorry, it was private. Thanks for the hint! Should be work now.
    this is a strange issue.
    If it worked then stopped working this can be an indication of antivirus/firewall/windows update issue, and I would start there.
    Also check in the AP/FBW window if for some reason you still have either CFM or IAE selected.

  7. #147
    150+ Forum Groupie
    Join Date
    Aug 2013
    Location
    eddn
    Posts
    210
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Hello Jeehell,

    Big big thanks for your reply. This was also my first thought, but AntiVir and Firewall was deactivated... As I know there was all up to date.
    Today this works again. I Hope it stays with a single time.
    But another issue are back today. The AP Disconnection.... and I know why the AP disconnect.
    When the Plane turns The Alpha min. Speed Protection oscillating up and down . See here in these Video: https://youtu.be/EIA3LFDDPb8
    Any idea whats happen?
    Looking forward to your reply.
    Kind regards
    Florian

  8. #148
    2000+ Poster - Never Leaves the Sim
    Join Date
    Mar 2008
    Location
    France,Nice
    Posts
    2,652
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    what altitude and weight?
    Quote Originally Posted by tcane View Post
    Hello Jeehell,

    Big big thanks for your reply. This was also my first thought, but AntiVir and Firewall was deactivated... As I know there was all up to date.
    Today this works again. I Hope it stays with a single time.
    But another issue are back today. The AP Disconnection.... and I know why the AP disconnect.
    When the Plane turns The Alpha min. Speed Protection oscillating up and down . See here in these Video: https://youtu.be/EIA3LFDDPb8
    Any idea whats happen?
    Looking forward to your reply.
    Kind regards
    Florian

  9. #149
    25+ Posting Member
    Join Date
    Jan 2011
    Location
    Paris, FRANCE
    Posts
    53
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Hi Florian,


    Why do you get "SWITCHG PNL" on your EWD ?
    It seems to be an initialization error, you should NOT get this, as far I can see your modules on your video...
    So, try to move the Switching Panel switches, until this message disappears.


    Normally this has nothing to do with what you describe, but in case of an initialization error, there may be strange things......


    Sometimes I get the same "SWITCHG PNL" initialization bug with Skalarki hardware, but I correct it using Switching Panel, before starting engines. So I can't tell you what could happen later, when using sticks and THR LVRS...
    I'm not sure on your video, but is it Skalarki hardware too ?


    Regards,
    Michel

  10. #150
    150+ Forum Groupie
    Join Date
    Aug 2013
    Location
    eddn
    Posts
    210
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: A320 FMGS B50

    Hi Jeehell and Michel,
    Thanks again for your reply.

    @Jeehell
    Please find in attach the picture with my load from TopCat. I was on FL380.
    Another Question: I have now an old car blower for ventilation system. I´m think about how can I integrate it to your software or is it better to connect it directly to the pack flow switch on the Overhead? Don't know... do you have any plans with the Packflow switch?

    @Michel
    No i didn´t have any Skalarki Hardware the most things (incl. Throttle) are genius parts in the pedestal.
    Don't know why this message appears because PFD and ND are on the correct positions. The "SWITCHG PNL" problem was not on my priority check list until now... But thanks for the hint, I will check the buttons.

    Kind regards
    Florian
    Attached Images Attached Images