A320 FMGS B50

[Rafape]

I think you can't...

It can not? There is no way? I read that by pressing the black button to the right of Airport and with Ctrl + L, but nothing ...

Thank's!

[jeehell]

Yes you can of course.
You need to push the empty keuy on the soft MCDU faceplate, or with the keyboard push CTRL+L if I remember well, to toggle between data and label lines.

[Rafape]

Yes you can of course.
You need to push the empty keuy on the soft MCDU faceplate, or with the keyboard push CTRL+L if I remember well, to toggle between data and label lines.

Thank's JL, but I have tried everything, with Ctrl + L, black button to the right of the airport button in the mcdu, but nothing. My mcdu is on a remote pc. I have tried from the main PC and the remote PC, but nothing at all. That does not work for me. I can not move the LABEL line.

[Firefly77]

Hi Rafape,
for me Shift+L ist working ! With Shift +L I can switch between Label and Line and can move them seperately !
Hope this helps.
BR
Michael

[buentead]

I have FMGS B50.2 installed. The behavior of BAT1 and BAT2 switches are very different. Please, can you verify this? Thanks.

BAT1 off, BAT2 on - behavior is OK:

• Offset 0x7396 shows 0b0000.1000 -> BAT1 off
• Offset 0x739a shows 0b0000.0001 -> backlight on

BAT1 on, BAT2 off - behavior strange - is this expected?

• Offset 0x7396 shows 0b0001.0100 -> BAT1 fault, BAT2 fault
• Offset 0x739a shows 0b0000.0000 -> backlight off

Note: If I attach external power and BAT1 and BAT2 remain off, I get the following (also kind of strange to me):

• Offset 0x7396 shows 0b0001.1100 -> BAT1 fault, BAT1 off, BAT2 fault
• Offset 0x739a shows 0b0000.0001 -> backlight on

Thank you for clarification
Adrian

[jeehell]

hi

I checked here, things are normal? did you compare with soft OVHD? they receive the same data?

[Rafape]

Hi Rafape,
for me Shift+L ist working ! With Shift +L I can switch between Label and Line and can move them seperately !
Hope this helps.
BR
Michael

Hi Michael, but not working for my! ;(

[Rafape]

Hi.

To a problem on my remote PC, I had to reconfigure the MCDU, but now I can not remember how to operate it on the remote without having to activate IOCKeys.exe.


How to link the remote MCDU to the main PC?. A long time ago I got it, but I can not find how I did it. Does the MDCU have to be on the main PC or on the remote PC?

What would be the steps to follow?

Thank's!

[jeehell]

Hi Michael, but not working for my! ;(

Did you try SHIFT+L as Michael said instead if the CTRL+L I suggested?

[Rafape]

Did you try SHIFT+L as Michael said instead if the CTRL+L I suggested?

Hello JL I have tried everything. Ctrl + L and Shift + L and nothing at all. I've tried it on the main PC and on the remote PC ...