A320 FMGS B48

[DannyT]

Hello,
I would like to know, if there exist an offset which indicates if ground Spoilers are armed?
I need a read offset, not the Set offset.
Highly appreciate any help....

[jeehell]

Hi

No there is no such offset and there won't be.
Regards
Jean luc

[jpromeroa]

Dear JL,

Will there be a near future update?

Regards,
JP

[jeehell]

Hopefully yes, but no idea when. I have some things to finalize which need some time I don't have right now

[Leonidas]

Hi
I have ILS LOC alignment problems with these runways: LEBB12 LEMG12 LIMJ28 LIRN06.
Could someone move his plane there for a moment and send a feedback?
Thanks

[buentead]

[...]
From previous versions also, i had a problem for not seeing the green line path of the flight plan on my ND.
Usually restart of everything corrects the problem.

Yesterday i install 48.2.2 and i made a test flight. From the beginning i didn't have the green flight path line.
[...]
Thank you,
Mike

Hi Mike

I do have the same problem regarding the flight plan path on the ND after upgrading. Although the autopilot fly correct, I cannot the the flight plan path on the ND. Could you fix this issue?

Thanks for feedback
Adrian

[romeow]

Why fix this issue? All the other users of FMGS 48.2.2 obviously don't have this problem. So this "bug" seems to be somewhere in your installation.
Regards
René

[diogofcr]

Why fix this issue? All the other users of FMGS 48.2.2 obviously don't have this problem. So this "bug" seems to be somewhere in your installation.
Regards
René

I am also having this problem so he is not the only user. Sometimes the flight path line shows sometimes it doesn't and sometimes neither the flight path neither the waypoints appear. I am using the most updated AIRAC (1712) and Navdata folder is the same on all computers, so yeah Jeehell has to see what is going on and fix it, I have done like 10 flights without flight path on ND.

Hi
I have ILS LOC alignment problems with these runways: LEBB12 LEMG12 LIMJ28 LIRN06.
Could someone move his plane there for a moment and send a feedback?
Thanks

I am also having ILS LOC alignment problems (not sure if it is same as yours). Since AIRAC 1710 (when I change to AIRAC 1709 it is fine) that the ILS courses are wrong in some airports, for me it says LPPT rwy03 course is F031 (RAD/NAV mcdu page) and the real one is F026, the problem is I can't change it and it puts me out of alignment. Same happened today on LPPD, rwy30 course is 300 (published on charts) and RAD/NAV MCDU page said F311. I haven't tested it in more airports but this is really annoying, I thought it was an AIRAC problem but I tested today with 1712 and it still has the same problem, what should I do? Right now I can't do ILS approaches...
The problem is only on the RAD/NAV page I guess because on the airport page the runway course on the runway list is fine

[jeehell]

Probably AIRAC 1710+ have a QFU different than the stock P3D (or the addon scenery you may use).
This means my soft is not able to detect the correct runway anymore and it uses bad data.
Try to use Hervé Sors RWY/ILS fix tool http://www.aero.sors.fr/navaids3.html

[romeow]

I am also having this problem so he is not the only user. Sometimes the flight path line shows sometimes it doesn't and sometimes neither the flight path neither the waypoints appear. I am using the most updated AIRAC (1712) and Navdata folder is the same on all computers, so yeah Jeehell has to see what is going on and fix it, I have done like 10 flights without flight path on ND.

Sorry, I think that I was a bit too rigorous with my remark "all other users". But if I don't face this problem (and it seems the majority of 48.2.2 users don't face it either) it's nearly impossible that this "bug" is part of JH's software.
Regards
René