A320 FMGS B47

[michael1508]

WXR works fine now.
Now some new miracle: since updating to B47 (B47.0) it happens randomly, that the route is not displayed on the ND.
As always, I enter the flightplan, while IRS is aligning. Now when the alignment is finished, the red message on the ND disappears and just shows the plane and the runway. But no route!

Since I only had this effect two-three times the last days I wonder, if this has to do with the update, or if I am the one, maybe missing something? What could cause the ND not to show the programmed route?

Thanks,
Michael

[mangione]

WXR works fine now.Now some new miracle: since updating to B47 (B47.0) it happens randomly, that the route is not displayed on the ND.As always, I enter the flightplan, while IRS is aligning. Now when the alignment is finished, the red message on the ND disappears and just shows the plane and the runway. But no route! Since I only had this effect two-three times the last days I wonder, if this has to do with the update, or if I am the one, maybe missing something? What could cause the ND not to show the programmed route? Thanks,Michael

I have the same problem randomly, the only way to see the route on the ND is to close the FMGS on the client and start it again. (I have all the displays on one client)

[dkreiskott]

Hi Jean Luc,

I using FMGS Server on an dedicated Computer. But since I have it installed my Fsx stutters. I'm using a Core I3 for the FMGS Server. Is it ok? Or what are the specs for a dedicated Server Computer?

Regards Dieter

[michael1508]

I have the same problem randomly, the only way to see the route on the ND is to close the FMGS on the client and start it again. (I have all the displays on one client)

Too bad... was hopping, it would be my fault.

[OrlandOre]

Hi all,
i have problem with the spoilers (or speed brakes) in the minimum position since start up to stop the aircraft, the problem is the appear out on the ECAM F/CTL Sistem Display all flight long... anyone else?

( I have FSCockpit Hardwere.).

[romeow]

No probs so far with this item (using FSCockpit Speedbrake module as well). Try to reinstall the driver.

[startrail]

[QUOTE=OrlandOre;167596]Hi all,
i have problem with the spoilers (or speed brakes) in the minimum position since start up to stop the aircraft, the problem is the appear out on the ECAM F/CTL Sistem Display all flight long... anyone else?

( I have FSCockpit Hardwere.).[/QUOTE

No problem at all with Fscockpit.

[dkreiskott]

Hi all,
i have problem with the spoilers (or speed brakes) in the minimum position since start up to stop the aircraft, the problem is the appear out on the ECAM F/CTL Sistem Display all flight long... anyone else?

( I have FSCockpit Hardwere.).

Yes, I have the Same problem

[jpromeroa]

Hi!


I'm having an issue after I updated the Nav Data to 1704 with Navigraph.


Both MCDU are displaying the correct cycle and all data looks to be correct. However, after loading the route, and when trying to insert a different route, the ND wouldn't display the new route but the one I first inserted. The MCDU's flight plan page looks OK but the ND is stuck with the first route inserted. The same thing if I request a Direct To or a Radial In.


I updated the Navdata twice.


Please help!

[jeehell]

Hi!


I'm having an issue after I updated the Nav Data to 1704 with Navigraph.


Both MCDU are displaying the correct cycle and all data looks to be correct. However, after loading the route, and when trying to insert a different route, the ND wouldn't display the new route but the one I first inserted. The MCDU's flight plan page looks OK but the ND is stuck with the first route inserted. The same thing if I request a Direct To or a Radial In.


I updated the Navdata twice.


Please help!

Nothing to do with navdata. You have a frozen ND or issue with networking it seems.