A320 FMGS B47

[tcane]

Hi
Last update in the late afternoon, no particular problems except the FMA display which was incomplete, wider.
All is normal now after adding in aircraft.ini of C: \ A320FMGS \ FMGS Server \ PERF \ PA320
The following line: EISmodel = 2 to enable eis2

Since switching to B47 I no longer have the 'decel' display in green on the autobrake, it is active on the ECAM.
The display test is correct for all systems from "ann / l" in the test position on the overhead.
Am I the only one in this case ??

Thank you for your help
Best Regards
Ridha

Hi,
I have the same issue.

cheers
Florian

[jeehell]

There as an update in the evening, please try it...

JL

[imported_Suggy]

There as an update in the evening, please try it...

JL

Thanks, JL.

FMA now appears to be fixed.



Regards,
Darren Sugden

[Leonidas]

Hi
Since switching to B47 I no longer have the 'decel' display in green on the autobrake, it is active on the ECAM.
The display test is correct for all systems from "ann / l" in the test position on the overhead.
Am I the only one in this case ??
Ridha

Confirm that. Happens to me to.

[Leonidas]

Hi guys
[Who could help me? I can't see WXR.
1st PC: P3D, FMGS SERVER, Default shared folder WXR.
2nd PC both NDs, WXR setting= \\SERVER_NAME\WRX (I can access this manually)
Search for an airport with precipitation in AS16, today was SBCG somewhere in Brasil, so tilt degree is the only I can see on NDs during a litle flight there. There was 9 dat files in WXR folder 800KB each, but no prcpt image on NDs.
What is wrong? Thanks]

EDIT: It's OK adding write privileges to shared folder.

[Beaufort]

...
I have an old hardware Panel for the WX Radar. GAIN an TILT are Pots. Will there be an assignment for this too?
...

I have a 2015 Skalarki Pedestal with WxRadar panel, I can change gain and tilt with the Pots, but tilt gives one problem: While properly calibrated I can only turn the tilt down to 0 instead of -15 and so I mostly don´t see the precipitation on the ND. I can reach negative tilt values only via MCDU and then the precipitation display on the ND is present as it should be. Is that a problem of Skalarki profiler or can it be solved somewhere in JeeHell?

[Fritz]

Has someone already solved the disconnect autothrust issue?
Have installed the latest skalarki profiler and assigned several release events.
The problem still occurs.
If someone has fixed this issue please tell us how.

[Rafape]

Great job JL.

Only one question. I was assigned a Joystick button for the landing gear and now it does not work for me. Why can it happen?

If I out the FMGS it works.


Thank you!

[jeehell]

Great job JL.

Only one question. I was assigned a Joystick button for the landing gear and now it does not work for me. Why can it happen?

If I out the FMGS it works.


Thank you!

do not use FSX/P3D assignmennts... only those in FMGS config. Including flaps,gear,spoilers,etc.

[mangione]

I have a 2015 Skalarki Pedestal with WxRadar panel, I can change gain and tilt with the Pots, but tilt gives one problem: While properly calibrated I can only turn the tilt down to 0 instead of -15 and so I mostly don´t see the precipitation on the ND. I can reach negative tilt values only via MCDU and then the precipitation display on the ND is present as it should be. Is that a problem of Skalarki profiler or can it be solved somewhere in JeeHell?

The same to me and I can't adjust the gain