A320 FMGS B47

[Leonidas]

Hi
Suddenly Ground Spoilers connected to FDS card doesn't work properly, when I arm the ECAM message just turn on and off, doesn't stay in arm position. I've checked wiring via IITCreator and seems OK. I use legacy drivers for FDS. Should I try the new ones?
Regards

[OmniAtlas]

1. I think the XXXX are clear enough that you need to rebuild the database... I cannot say on every release it is required (it hasn't been for some time). But it's always bets, and it will be in the few next I think due to some changes in the format.

2. weird, never seen that. report if it happens again.

3. the same % range as the retracted position is used.

4. Doing that you changed your FMGS from CLB mdoe to DES mode (probably closer than 200NM from DEST). You can change again to CLB or CRZ in the MCDU PROG page by forcing the CRZ FL in the 1L field.

5. Probably linked ot navdata ...

I updated the navdata, and rebuilt -- everything seems to be working fine now.

2. Seems to be resolved, did see the graphical glitch again when turning into an ILS approach, I think it is the way the graphical draws are handled when the managed mode FMGS is trying to redraw a curve.

[emulov]

Hi
Suddenly Ground Spoilers connected to FDS card doesn't work properly, when I arm the ECAM message just turn on and off, doesn't stay in arm position. I've checked wiring via IITCreator and seems OK. I use legacy drivers for FDS. Should I try the new ones?
Regards

Hi Leonida,


If you use a button to ARM the Ground Spoilers, you have to make sure that the option "ARM as analog range" is NOT ticked.



Regards,
Isak

[Leonidas]

Hi Leonida,
If you use a button to ARM the Ground Spoilers, you have to make sure that the option "ARM as analog range" is NOT ticked.
Isak

That's recenlty added I think. Thanks Isak.

[jeehell]

Hello

I just put a small update to fix an issue Awith ATHR staying at idle in certain conditions (with eng anti ice on, and if engines were spooled all way down to idle).

JL

[jpromeroa]

Dear JL,

I have been dealing with an issue for a while now with the presentation of the flight plan green line on the ND of the flight plan inserted on the MCDUs.

A month ago I updated the nav data cycle and the issue started. It presented like this: IR already aligned, ND on map to review the flight plan green line and constrains, the after I inserted the route all was fine but then I inserted a different route and the old one it stayed and the new one did not displayed on the ND. After TO the aircraft flew the route inserted on the MCDU but the ND didn't displayed it.

Then I updated the Nav Data again and it started to work fine again. However, when I reboot the computer next day, again the issue with the ND green line but this time only the runway presented on the ND but no green line, fix or constrains on the screen. I updated again the Nav Data, worked fine for one flight and then it stoped during the flight.

I don't know which is the problem, the Nav Data or something regarding a file that I may erased unintentionally form the Navdata directory or something with the Client or Server computer. I have been tryin all for a month, and no fix.

Do you have an idea of what is happening with this? Other that this all systems are working in perfect conditions with the update. I really need your help on this.

Best regards,
JP

[jeehell]

What you experience is either a problem with your installation somehow, or with your Network.

[filippoporcari]

hi jl,
running 47.3 with latest autoupdate but both ND when using eis2 option still cannot be resized to show all infos (dme of vors and top line still out of the mip window...tried to resize but the lines are always cut.
with old eis style everything is perfect.
am i the only one?
regards
fil

[jeehell]

the window must be square.
you can manually adjust the width/hieght in the ini files for each EIS.

[Miatanet]

Hi
having Problem after update to latest Version starting my bus. APU does not come up, both korry led's go off after 30 sec. And no power is available for ND/MCDU etc.

Any idea?

Br
Stefan