Results 1 to 6 of 6
  1. #1
    10+ Posting Member
    Join Date
    Sep 2016
    Location
    USA
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    OC PnP EFIS unit disconnects from PC often

    Hi everyone,

    Any ideas why my OC PnP USB EFIS unit occasionally disconnects from the PC. I have an OC MCP, ATC, EFIS, and Jetmax radio and the only unit that does this is the EFIS panel.

    1. This is what I have tried, I have selected high performance for my PC to include disabling USB suspend. Didn't work.
    2. Went into device manager in Windows 10 and under all of the USB root hubs I deselected "allow this computer to turn off this device to save power". It didn't work.

    Any ideas?

    Thanks,

    George

  2. #2
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    908
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: OC PnP EFIS unit disconnects from PC often

    George,
    Are you using a hub to connect all your modules. If so make sure there is enough
    power run all modules.
    If not then you may need to get a hub and one with enough power to run all
    modules.
    Les

  3. #3
    10+ Posting Member
    Join Date
    Sep 2016
    Location
    USA
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: OC PnP EFIS unit disconnects from PC often

    Hi Les,

    I have everything connected to a Tripp Lite USB 2.0 hub. I have a 5v 2.6 amp adapter, but just replaced it with a Mean Well 3 amp adapter to see if it fixes the issue.

    Thanks,

    George

  4. #4
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    908
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: OC PnP EFIS unit disconnects from PC often

    George,
    Here is what i use, has many translators as against the cheaper ones.
    Good reliable industrial type. I use two of these as i found the cheaper versions of hubs tendered to hiccup when loaded.
    This is what i found to be the fix for my int usb disconnects.
    http://www.usbfirewire.com/parts/rr-usb2-hub7.html

    Regards
    Les

  5. #5
    10+ Posting Member
    Join Date
    Sep 2016
    Location
    USA
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: OC PnP EFIS unit disconnects from PC often

    Hi Les,

    Looks like I have a similar hub, https://www.tripplite.com/rugged-ind...rt~U223007IND/

    What I like about the one you sent me is that it brings an adapter. I had to supply (no pun intended) the adapter with the tripp lite. Luckily I found a Mean Well 3.0 amp 5v adapter with the correct plug on eBay for $10. I checked with a volt meter and it came with with 5.13v.

    Just flew a flight with it and the EFIS unit didn't disconnect. Hopefully it won't disconnect again as I do have 7 items plugged into it.

    Thanks,

    George

  6. #6
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    908
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: OC PnP EFIS unit disconnects from PC often

    George,
    Hope yours works out as well as mine. My uusb modules started to play up as i
    added more modules. I currently run 9 off two of the hubs i showed. Yours are industrial type so should be good.
    Regards
    Les