Results 1 to 5 of 5
  1. #1
    10+ Posting Member
    Join Date
    Sep 2016
    Location
    USA
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Where to buy OC 737 EFIS (current version as of late 2016) knobs that look realistic?

    Hi everyone,

    I have the OC 737 EFIS panel and would like to replace the knobs with more realistic versions with STD, RST, etc on them. Any ideas where I can find knobs that work with it?

    Thanks,

    George

  2. #2
    300+ Forum Addict


    tiburon's Avatar
    Join Date
    May 2007
    Location
    Amsterdam
    Posts
    350
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Where to buy OC 737 EFIS (current version as of late 2016) knobs that look realistic?

    You could try here, shipping to the usa might be expensive :

    http://acvdesign.wixsite.com/acvdesign/b-737-ingles
    Gigabyte GA-Z97X - Intel i7 4790K@4,6 GHz - GSkill TridentX F3-2400C9D-8GTXD - 2 X Samsung 840 EVO 120GB - Seagate SSHD 2TB - Asus GTX780 DC2 OC 3GD5 - Windows 10 Professional 64

  3. #3
    10+ Posting Member
    Join Date
    May 2014
    Location
    Arizona
    Posts
    13
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Where to buy OC 737 EFIS (current version as of late 2016) knobs that look realistic?

    Quote Originally Posted by tiburon View Post
    You could try here, shipping to the usa might be expensive :

    http://acvdesign.wixsite.com/acvdesign/b-737-ingles
    I have EFIS and MCP knobs from acvdesign. Good quality but shipping is a bit of an issue. Like Tipuron said, it's expensive and sent via USPS, which makes it impossible to track. Another option is http://www.aviasimulation.com

  4. #4
    10+ Posting Member
    Join Date
    Sep 2016
    Location
    USA
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Where to buy OC 737 EFIS (current version as of late 2016) knobs that look realistic?

    Update: I received EFIS knobs from acvdesign, but the hole on the knobs are too small to use with the opencockpits metal shim or if I remove the metal shim, the knob holes are too big. They're great looking knobs, but it's a no go.

    Any ideas on making these knobs fit? They do have a set screw, but it doesn't reach the switch shaft since the hole is too big.

    Thanks,

    George

  5. #5
    10+ Posting Member
    Join Date
    May 2014
    Location
    Arizona
    Posts
    13
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Where to buy OC 737 EFIS (current version as of late 2016) knobs that look realistic?

    Quote Originally Posted by dornierRP View Post
    Update: I received EFIS knobs from acvdesign, but the hole on the knobs are too small to use with the opencockpits metal shim or if I remove the metal shim, the knob holes are too big. They're great looking knobs, but it's a no go.

    Any ideas on making these knobs fit? They do have a set screw, but it doesn't reach the switch shaft since the hole is too big.

    Thanks,

    George
    If it's too big, you could try finding some brass metal tubing at a hardware store, cut it to size and fit it inside the knob. Just get the right size so it is snug. The hardware store might have some 'set screws' that might be longer to allow you to use without the metal shim from OC. I've used the metal tubing a couple of times.

    If the hole on the knobs are too small, you could use a drill to widen the hole. I've used that option too. Just be careful not to put too much pressure or you'll crack the knob.

    Finally, you could try http://www.aviasimulation.com/knobs. Get a caliper and measure the width of the rod and send an email to Sergi to confirm the width of his knobs. Or try Sismo http://www.sismo-soluciones.com/index.php/shop/knobs

    Good luck.
    Steve