LOC / GS approch not in direction of Runway

[digidax]

lol, which one stored in one of the two locations:

the "root" one in the installation path of P3D

OR

C:\Users\(user name here)\AppData\Roaming\Lockheed Martin\Prepar3D

[Busdriver65]

i have the scenery.cfg in the user/ your name / ........ umbenannt and then start the Sim

[digidax]

Have done this, after starting P3D scenery.cfg was regenerated, have made a test flight from EDDE to EDDF on RWY 25C - problem is the same.
On the end of the final approach the ECAM shows a magenta LDG INHIBIT message, do you have this too?

Before doing this test flight, I wanted to test it from EDDF RWY 25C back to EDDF RWY 25C passing WPT KERAX but in P3D I can't place the aircraft on RWY 25C because it is not in the list of EDDF. Can this be the problem that the airac knows RWY 25C and the scenery of EDDF not? And this works for you because you have the mega airport addon?

best regards,
Frank

[Beret]

Hi Frank

LDG INHIBIT in the final approach is normally. That mean, that some error messages are not displayed in this flightphase.

For the other problem, I think, that the different from AIRAC to scenery can be the problem.

Best regards

Guido

[digidax]

Thanks Guido,
I will try to find and install an other scenery for EDDF instead of the default installed scenery by P3D and test it.

Thanks, Frank

[Busdriver65]

I have the Scenery from Aerosoft

cycle 1612 navigraph

[OmniAtlas]

Not too sure if you all know but you do know you can add additional waypoints and runways to the database? You need an additional.txt file in the Navdata folder, and rebuild the database.

There was a thread on this specific matter many months ago.

Here is KaiTak and EDDF for example:

Additional.txt

PA|VHHX|VH|22.316667|114.203333|15|250|F100|9000|KAI TAK INTL|
PG|VHHX|VH|RW13|10930|1864|197|22.322177|114.196318|15|136|KL|1
PG|VHHX|VH|RW31|10930|716|197|22.305538|114.215179|15|316|IHK|1
PI|VHHX|VH|KL|1|111.900|RW13|22.33390756|114.201911688|088|22.33390756|114.201911688|3.1|15|
PI|VHHX|VH|IHK|1|109.900|RW31|22.326954603|114.190941006|316|22.304784469|114.214619994|3.0|15|
D |TH|VH|115.500|VDHW|22.239000|114.289001||||||TATHONG POINT
DB|TP|VH|280.0|H MW|22.239000|114.289001|TATHONG POINT
DB|RW|VH|377.0|H MW|22.3265|114.19116666666667|HONG KONG INTL
DB|SC|VH|236.0|H MW|22.32|114.13216666666667|STONECUTTERS
PM|VHHX|VH|KL| OM|RW13|22.326835|114.092402|
PM|VHHX|VH|KL| MM|RW13|22.331539|114.165248|




PF|EDDF|ED|I25C|A|MTR|010|MTR|ED|D |V C||||IF||| ||||||+|5000|0|0||||
PF|EDDF|ED|I25C|A|MTR|020|D159H|ED|PC|EY ||||CF|FFM|ED|D ||61.9|12.3|159.0|8.3||0|0|0||||
PF|EDDF|ED|I25C|A|MTR|030|REDGO|ED|PC|EE ||||CF|IFCW|ED|PI||68.6|13.5|248.0|3.0|+|4000|0|0||||
PF|EDDF|ED|I25C|I||010|REDGO|ED|PC|E I||||IF|IFCW|ED|PI||68.6|13.5|||J|4000|4000|0||||
PF|EDDF|ED|I25C|I||020|FI25C|ED|PC|E F||||CF|IFCW|ED|PI||68.6|9.3|248.0|4.2|H|4000|2610|0||-3.0|FFM|
PF|EDDF|ED|I25C|I||030|RW25C|ED|PG|G M||||CF|IFCW|ED|PI||68.6|2.4|248.0|6.9||414|0|0||-3.0||
PF|EDDF|ED|I25C|I||040||| | M ||||CA||| ||||248.0||+|770|0|0||||
PF|EDDF|ED|I25C|I||050|FW|ED|DB|E ||||CF|FFM|ED|D ||249.0|8.6|248.0|5.6||0|0|0||||
PF|EDDF|ED|I25C|I||060|DF282|ED|PC|EY ||||CF|FFM|ED|D ||248.6|12.0|248.0|3.5||0|0|0||||
PF|EDDF|ED|I25C|I||070|DF282|ED|PC|E ||||FA|FFM|ED|D ||248.6|12.0|248.0||+|5000|0|0||||
PF|EDDF|ED|I25C|I||080|TAU|ED|D |V |R|||DF||| |||||||0|0|0||||
PF|EDDF|ED|I25C|I||090|MTR|ED|D |VE H|R|||CF|FFM|ED|D ||30.3|15.7|85.0|26.5||5000|0|0||||

[digidax]

Very interesting. Is there a description of the columns?

[OmniAtlas]

I would read this thread - http://www.mycockpit.org/forums/showthread.php?t=30070

[digidax]

Problem solved:

The airac cycle and the charts are knowing 25L, 25C, 25R. But the default scenery of EDDF on the latest version of Prepar3d knows only 25L and 25R. There is also a mismatch of the ILS frequency, so the arrival on EDDF is going wrong. The new 25C is the old 25R. The new 25R was official released in 06/2011, so P3D is using a very old scenery.

I have found a scenery for FSX that should have the 25L, 25C and 25R here:
http://library.avsim.net/esearch.php?DLID=191302


Can anybody tell me please if it's possible to use it in P3D 3.4 or does anyone knows a source for a free actual P3D scenery for EDDF?

best regards, Frank