Results 1 to 4 of 4
-
09-17-2016, 07:19 PM #1
- Join Date
- Aug 2016
- Location
- Italy
- Posts
- 12
How I can create the Flap's mechanism of the C172?
Hi, I Would like to create the control lever of the flaps for the Cessna C172 that I would to use for control a potentiometer , for you how I can realize it?
You know a tutorial or a site where I can found the instructions for create the lever?
Thanks and bye bye
-
09-18-2016, 08:09 AM #2
- Join Date
- Aug 2016
- Location
- Italy
- Posts
- 12
Re: How I can create the Flap's mechanism of the C172?
The night was very Councillor, this morning, in fact, I realized the flap mechanism for my home cockpit; I attach a photos of the prototype.
As you can see in the central axis I put a spring so as to be able to follow the profile to "steps" of the flap notches.
Here a video of dimostration: https://youtu.be/Efks_1VOpzA
Now I have to move from prototype to final implementation, but the bulk is now done.
ciao
-
09-21-2016, 03:35 PM #3
- Join Date
- Aug 2016
- Location
- Italy
- Posts
- 12
Re: How I can create the Flap's mechanism of the C172?
And here another video of the throttle and flaps https://youtu.be/GZnBUSJdQ8c
Ciao
-
09-29-2016, 07:13 PM #4
Re: How I can create the Flap's mechanism of the C172?
Looks like a well made mechanism. It looks like you are using a slide potentiometer. You could also use a normal rotary potentiometer and assign the axis in FSUIPC, or you could use a series of switches for each flap setting.
You need to wire up the pot and test it out with flight sim. Looks like it should work well
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...