A320 FMGS B45

[romeow]

Since i update my jh to v45 my plane weights 33.4 tons.
regards
Frederico

Where does this weight come from? Where do you read it?
Regards
René

[Leonidas]

Where does this weight come from? Where do you read it?
Regards
René

You can read it in P3D menu Vehicle --> Fuel and Payloads

[jeehell]

Already discussed.

Hi all

Just a question.... Does nobody had a problem with the Aircraft weight with B45? In my aircraft.cfg, the dry weight of the Aircraft was completely wrong! The weight in the aircraft.cfg was around 73000 pounds wich is in kg 33500...... But the actual weight of a A320 (and mentioned in the cfg file) is 42500kg. So it was necessary to change the weight in the aircraft.cfg to 93694.9 (pound) to have a proper weight and C.G.

FYI

Cheers
Daniel

this was not an error, the aircraft.cfg changed for W&B purpose, you need to put the old weight back. There are new payload stations which are used for some W&B tricks (the adjustement payload stations).

Thanks JL for the clarification! So I have to be careful when I load the Aircraft with TOPCAT. Because its overwriting the exiting weights and usually the aircraft is too light. Which are the stations with the additional Weight for W&B?

Cheers
Daniel

[ToTom]

Topcat will not work correctly now. This is not possible.
In addition, it must be used only a320-214 from FMGS package.
FMGS does not work properly with any other model! (A318 / 319/321).

[Phpilot]

Topcat will not work correctly now. This is not possible.
In addition, it must be used only a320-214 from FMGS package.
FMGS does not work properly with any other model! (A318 / 319/321).

Hello. i use the TOPCAT to payload the plane. And i use de TOPCAT configurations that are mentioned in jee **** website.
My question is : i have to chafe weight in aircraft.cfg file ou not?
cheers
FP

[ToTom]

Hello. i use the TOPCAT to payload the plane. And i use de TOPCAT configurations that are mentioned in jee **** website.

These are old files - for the old models.
It is not compatible with the new model from FMGS B45.

[Miatanet]

Hi all
same behavior here, changed cfg to old values and now topcat is working fine, with new delivered values of B45 topcat does not load fuel into the A320.

BR
Stefan

These are old files - for the old models.
It is not compatible with the new model from FMGS B45.

[Busdriver65]

what I need to change where

[Phpilot]

Hi...where ( witch line) in aircraf.cfg do you change?....can you help?
regards

[romeow]

changed cfg to old values and now topcat is working fine,
BR
Stefan

That's correct! You have to change in aircraft.cfg the value to

empty_weight=96401.4

which corresponds to the value set in


AirbusA320-214 Jeehell FMGS.txt
>DOW=96401

Regards
René