A320 FMGS B45

[flykarli]

Hello Günther !

I also believe that this is a network problem. since there is no such long delays.
best regards
Karl
http://a320.jimdo.com/

[Airmichel]

Hello everybody,

I have a problem with the sioc creator. The Cpt MCDU works without problems, but the fo MCDU can not be installed.
The SIOC creator hangs on every time. Is there somewhere a tutorial for proper installation?
best regards
Micha

[Mitch95]

Hello Micha,

You can find a tutorial in your C:/A320FMGS folder.
At this time, it is only a french version tutorial called "FR-Manuel Experts B42.pdf": chapter 6.2 (page nr 36) which tells you how to do (maybe Google translator can help you too).

If you got older versions JeeHell, I remember that an English version was available, called "Advanced users Manual". As far as I know, MCDU with SIOC_Creator configuration didn't get any modification into the updated versions...

Sorry for my approximate English...

Regards,
Michel

[asessa]

Hello Micha,

You can find a tutorial in your C:/A320FMGS folder.
At this time, it is only a french version tutorial called "FR-Manuel Experts B42.pdf": chapter 6.2 (page nr 36) which tells you how to do (maybe Google translator can help you too).

If you got older versions JeeHell, I remember that an English version was available, called "Advanced users Manual". As far as I know, MCDU with SIOC_Creator configuration didn't get any modification into the updated versions...

Sorry for my approximate English...

Regards,
Michel

Advanced User Setup ENG
http://media.wix.com/ugd/00d71d_6375...30ab1ea56f.pdf
thanks to @OmniAtlas

[Airmichel]

hello Michel and asessa,

i have the French and English Tutorial from Jeehell, but I found nothing to install a second MCDU. The CPT MCDU works fine. I have only Problems to install the FO MCDU.

Regards
Micha

[Mitch95]

Micha,

In SIOC_Creator, at MCDU page, you will find "Use FO MCDU" to check.
Then, you should be able to install the second MCDU as you did for the first one...

If not, I remember this however : someone in the french forum got issues to install Opencockpits "new V3" MCDU, a few months ago...
Maybe your first MCDU was a "V2" version, and your new one is a new "V3" ?

Regards,
Michel

[Airmichel]

hello Michel,

my MCDU is a kit, i use a Opencockpits USBKeys Card for connection with the Computer.
I have two USBKeys Card's for both MCDUs.

Regards

Micha

[Mitch95]

Hello Micha,

As far as I know, if you use USBkeys cards, you should not get the "V3" issue...

[Mitch95]

Hello Micha,

So, as far as I know, if you use USBkeys cards, you should not get the "V3" issue above...

First, the 2 MCDUs should be recognized by running SIOC.exe.
You should have a file named "jeehellware.ssi".

Then, run SIOC_Creator, page MCDU, check "Use FO MCDU".
Indicate where your card is connected (on the same computer as SIOC.exe or on network) and the IDX number.
Click on "Start configuration".

You should get a box message asking you to close SIOC.exe. It is important to do it !
Then click "OK".

Now you can run SIOC.exe again, and IOCkeys.exe too for the key detection.
Click "OK".

Then you should only have to follow SIOC_Creator, telling you step by step, the keys to press on your MCDU.

At the end, don't forget to select "Apply configuration" on SIOC Creator page.

I successed in proceeding like this, a few years ago...

I hope this will be helpful for you...
At what moment does SIOC Creator hangs on ?

Regards,
Michel

[Airmichel]

Hello Michel,
I try it with your instructions but it doesn't work.
The sioc Creator is hanging up when I Push the " Start Configuration" Button.
I don't no why!!!!!!!!
Have anybody an idea where this Problem comes from??????

Regards

Micha