Results 171 to 180 of 243
Thread: A320 FMGS B44
-
02-16-2016, 03:07 PM #171
Re: A320 FMGS B44
I have upgraded from version 44.2 to 44.4 today. My ACC Press gauge stops working.
In the IPC console offset 73A7 delivers no value anymore. Is there something changed?
In the overhead the LED for Cargo Smoke FWD "DISCH" is permanently illuminated.
Even three LEDs, which I have assigned to MISC6 light continuously.
The LEDs are connected to a FDS-Sys 3 Board.
I'm going to start IIT Creator and save again.
Let's see if this helps.
-
02-17-2016, 11:46 AM #172
Re: A320 FMGS B44
After I generated a new IIT.dnt with IITcreator the error with the permanent illuminating leds is corrected.
The problem with the offset 73A7 still remains.
Is the function already implemented that the trim wheels returns to 0 when landing?
I use the TL from Skalarki. With this it is not yet functioning.
-
02-17-2016, 11:57 AM #173
- Join Date
- Nov 2011
- Location
- Italy
- Posts
- 294
Re: A320 FMGS B44
the trim resetting to 0 was implemented since some time ago then it stopped resetting...jl is aware of this.
i'm also using skalarki hw but the problem is not the hw: if u look the fctl page the trim does not reset in fmgs.
fil
-
02-17-2016, 02:43 PM #174
-
02-17-2016, 06:21 PM #175
- Join Date
- Nov 2011
- Location
- Italy
- Posts
- 294
Re: A320 FMGS B44
stefan,
we're talking about the trim resetting to zero RIGHT AFTER TOUCHDOWN.
it was correctly functioning before...not now: if u check the flight controls page on the system display the trim stays at the value used at touchdown and pf course skalarki hardware remains there and is not resetting.
how can your tq reset the trim to zero if the input is not given by fmgs?
regards
fil
-
02-18-2016, 01:43 AM #176
Re: A320 FMGS B44
Hi JL
after a clean install I am missing the starterfsx.exe and I guess that is why my parking brake is doing strange things (Skalarki HW).
Thank you for a short feedback.
BR
Stefan
-
02-18-2016, 05:50 AM #177
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B44
Hi
Since some versions now startedFSX disappeared since FS9 is no longer supported, only FDSX or P3D which use the same sim link (simconnect). You issues with park brake are not related to that....
JL
-
02-19-2016, 07:54 AM #178
Re: A320 FMGS B44
Hello, I've received my new FDS momentary switches for the GPWS / G/S -- the switch is now wired up.
I notice on startup the GPWS LED remains turned on for several seconds.
Is this normal behaviour in the real aircraft?Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
02-20-2016, 11:49 PM #179
Re: A320 FMGS B44
Flying with approach mode activated, then -> direct to waypoint
approach mode is deactivated, and speed restrictions reset to waypoint calculated on descent.
Should approach mode mode remain activated?Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
02-21-2016, 02:46 PM #180
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B44
HI
When you do the EGPWS tests, yes the LED will lit up for several seconds.
As for the APPR mode, you are talking abuot the FMGS one (not the FCU APPR bitton)?
It probably depends on which point the DIR TO is done? is it part of the APPR procedure?
JL
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...