Results 1 to 6 of 6
  1. #1
    null null
    Guest

    PM commands don't work anymore via FSUIPC

    Hi,
    I am using a GoFlight RP48 module as an EFIS
    None of Project Magenta commands of the GF-RP48 via FSUIPC seem to work
    anymore although in the FSUIPC window they are recognized and can still be set.
    Only the direct commands to flight simulator, such as altitude setting
    (barometer) and altitude reset (B) seem to work.
    My Horizontal Display (by GC) is on a networked PC
    Any ideas? Thanks
    Rob


  2. #2
    Thomas Richter
    Guest

    Re: PM commands don't work anymore via FSUIPC

    Hi Rob,
    from GoFlight you get get the KeyMapper, maybe it will work.
    http://www.goflightinc.com/downloads...GFKeys0100.zip
    --
    Best Regards
    Thomas - EW321

    "Robert Vandenberghe" schrieb im Newsbeitrag
    news:272484.54110@wb.onvix.com...
    > Hi,
    > I am using a GoFlight RP48 module as an EFIS
    > None of Project Magenta commands of the GF-RP48 via FSUIPC seem to work
    > anymore although in the FSUIPC window they are recognized and can still be


    > set.
    > Only the direct commands to flight simulator, such as altitude setting
    > (barometer) and altitude reset (B) seem to work.
    > My Horizontal Display (by GC) is on a networked PC
    > Any ideas? Thanks
    > Rob
    >



  3. #3
    null null
    Guest

    Re: PM commands don't work anymore via FSUIPC

    Thanks, but my problem is that the RP48 is connected to the FS PC whereas the
    CG is on another one. So, I cannot key command another PC, can I? If I
    connect the RP48 to the other PC then I will loose the key commands used
    directly for FS. The problem is that it worked before and suddenly it failed. I
    don't know if I have meanwhile installed another version of something.


  4. #4
    Thomas Richter
    Guest

    Re: PM commands don't work anymore via FSUIPC

    Hi Robert,
    with KeyMapper you can use GoFlight-Cammands as normal KeyBoard-Commands and

    with this KeyBoard-Commands you can program over FSUIPC by Keyset.
    --
    Best Regards
    Thomas - EW321

    "Robert Vandenberghe" schrieb im Newsbeitrag
    news:272570.54110@wb.onvix.com...
    > Thanks, but my problem is that the RP48 is connected to the FS PC whereas


    > the
    > CG is on another one. So, I cannot key command another PC, can I? If I
    > connect the RP48 to the other PC then I will loose the key commands used
    > directly for FS. The problem is that it worked before and suddenly it
    > failed. I
    > don't know if I have meanwhile installed another version of something.
    >



  5. #5
    null null
    Guest

    Re: PM commands don't work anymore via FSUIPC

    Thanks Thomas, I will try that and let you know.
    Cheers


  6. #6
    null null
    Guest

    Re: PM commands don't work anymore via FSUIPC

    Problem solved. As I have mentioned in a later post, it was a false setting
    of the ND. It was by accent put in "first officer" mode.
    Anyway, thanks for you concern, Thomas
    Cheers
    Rob


Similar Threads

  1. anymore citation builders? or other bizjets?
    By Adino in forum My Cockpit Update
    Replies: 8
    Last Post: 11-02-2012, 10:44 AM
  2. FSUIPC: Deleting Commands
    By spartacus in forum General Builder Questions All Aircraft Types
    Replies: 5
    Last Post: 12-18-2010, 10:31 AM
  3. Coding the mastercard to work with FSUIPC
    By jmig in forum OpenCockpits General Discussion
    Replies: 2
    Last Post: 04-10-2008, 10:47 PM
  4. QuickMap commands with FSUIPC
    By Jackpilot in forum PM General Q & A
    Replies: 0
    Last Post: 04-03-2008, 05:49 PM
  5. Can't get reverse anymore
    By Skydvdan in forum FS2Phidget Users
    Replies: 2
    Last Post: 12-13-2004, 11:53 PM