Aircraft switches to LDG mode after T/O

[jeehell]

yes this is a normal behavior. The real sticks have an electromagnet to block the sticks...
You can increase the neutral zone for the stick so it is less prone to detect a flas movement.

[Stephan Schwarz]

Either you have a very bad joystick pot or your error zones are not correctly configured. I have set an error zone of 10% and it works fine for me with two Logitech Attack 3 joysticks.

Regarding your checklist problem, I sometimes see the same, then starting in TO/GA mode, but I cannot remember I have ever seen this in FLEX mode. Maybe you can try this?

Regards,
Stephan

[GoingForGold]

Thanks for your answers! I forgot to mention that I set the error zones around neutral to 10%, it is a logitech extreme 3D pro. I try to increase the neutral zones and see.