Results 1 to 10 of 18
Thread: EPGWS / G/S switch?
-
09-15-2015, 07:24 AM #1
EPGWS / G/S switch?
It looks like this is assigned as an ON / OFF switch on Jeehell FMGS.
Should this be assigned as a toggle button?
Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
09-16-2015, 02:34 PM #2
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: EPGWS / G/S switch?
Hi,
In the soft this is a toggle switch. But you need to tell the soft when the push is finsihed (the "release action") otherwise it cannot make the difference between short press and long press (on GND, long press plays more sounds).
JL
-
09-17-2015, 04:06 AM #3
Re: EPGWS / G/S switch?
Hi JL -- the MIP_FO_GPWSGS and MIP_CPT_GPWSGS only has an 'invert' tick box, and not a release option.
I am configuring through InterfaceIT creator. Thank you.Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
09-18-2015, 05:16 PM #4
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: EPGWS / G/S switch?
It should be more than enough? the FDS driver will send by itself both actions if all goes well. Did you actually try it and had any issue with that swtich?
-
09-18-2015, 08:14 PM #5
Re: EPGWS / G/S switch?
Pressing the switch on the ground activated the aural alerts. (On position).
Pressing the switch again turns it to the off position (nothing happens). The switch has to be pressed a 3rd time for the action to be repeated.
It looks like the the switch is set to on/off and not a toggle action.
i am also unable to activate the G/S warning light when in flight and I am not tracking the 3 degree glide slope.Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
09-20-2015, 02:49 AM #6
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: EPGWS / G/S switch?
I tested the switch with an FDS board, it does work as intended in the logic....
I'll test the warning logic when I have the time to...
-
09-20-2015, 03:53 AM #7
Re: EPGWS / G/S switch?
Try pressing the button twice in a row JL - second time does not trigger the test.
Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
09-20-2015, 04:05 AM #8
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: EPGWS / G/S switch?
Not sure what you want to achieve here...
pushing twice in a row (ie very closely repeated pushes, less than a the time for the first row of warning to play) will do nothing, by design.
from "normal situation", you can do 2 things:
1) Press once, briefly: only the GPWS sounds play.
2) press and stay pressed for at least until the sounds played in1) are played : more sounds will play (EGPWS + TCAS)
And this, does work, once, twice or more in the same session.
-
09-20-2015, 04:27 AM #9
Re: EPGWS / G/S switch?
Ji JL, I will do some more testing but it looks like my brief press (no hold) plays the extended version with the TCAS sounds
Pressing the second time after the first set of sounds have been complete does nothing. The invert button may have been set triggering this.Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
09-20-2015, 04:34 AM #10
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: EPGWS / G/S switch?
why do you use the "invert" feature in the first place? You do know what it's for right? its in case the wiring of the switch is inverted ie released position = switch contact closed and pushed position = contact opened.
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...