A320 FMGS B41

[Miatanet]

Hi Pim

good to know that it works, I may need to check again. What changed to the new profiler settings? Installed it, but I guess it should use the same settings, right? Maybe I need to delete all entries for the switches and reconfigure. Will tell when done .

Thank you.

Best regards
Stefan

[jeehell]

Hi,

for people having issues with joysticks, check that post:
http://www.mycockpit.org/forums/show...l=1#post158797

JL

[masterp]

Hi JL,
Have you checked the high brake temperatures after landing ?
Thanks

[OmniAtlas]

I'm still having some issues with unbalanced fuel -- maybe related to TOPCAT and how it injects the fuel? Anyone else having this problem?

[Airmichel]

Hello OmniAtlas,

I have the same Problem with Topcat like you.

Regards

Micha

[Leonidas]

I'm still having some issues with unbalanced fuel -- maybe related to TOPCAT and how it injects the fuel? Anyone else having this problem?

I have the same too, but not so big difference between left and right tanks. Mine is only about 10Kgs when I use Topcat.
Regards

[flykarli]

I'm still having some issues with unbalanced fuel -- maybe related to TOPCAT and how it injects the fuel? Anyone else having this problem?

For me it has helped in Topcat rejoin (reload) the Airbus.
Possibly helps also with you.
regards
Karl

[Miatanet]

Hi,

same problem here, but its more that it is not fully brings all fuel in, when fmgs is running and it always says "please load fuel manually". I first load the fuel and after that I start fmgs that is my workaround for the moment.

BR
Stefan

[buentead]

I'm still having some issues with unbalanced fuel -- maybe related to TOPCAT and how it injects the fuel? Anyone else having this problem?

I also have the problem in my installation. And TOPCAT SW didn't change in the meantime.

Regards
Adrian

[stefangr]

I also have the problem in my installation. And TOPCAT SW didn't change in the meantime.

Regards
Adrian

I have done some more tests on this today (using P3D + TOPCAT). It looks as if the left fuel tank cannot be accessed when the fuel is injected via TOPCAT. Only the right tank is filling up, but you will not get your desired total fuel quantity (and also getting an imbalance of course).

I think this has nothing to do with TOPCAT. I also tested this with FS Refuel, and it's the same problem there: selecting a desired total fuel quantity only feeds the right tank, not giving the total fuel quantity in the end.

The workaround to make the fuelling before FMGS starts might work if you only do one flight, but when you do a connection flight, you can only load fuel by P3D menu.

Perhaps JL can look into this?

Thanks
Stefan