Results 1 to 3 of 3
  1. #1
    null null
    Guest

    [LOGIC] Center logic 0 Three position toggle switch

    Hello Enrico
    I tried to create a switch with a logic 0 in the center, just like a
    real on - off - on toggle. the stock Toggle switch code from the
    release 42d is bellow:

    bitmap coverswitch3,0,-108.0,31.9,-86.7,14.8,0,1,.4
    bitmap coverswitch3,1,-185.2,31.9,-163.5,14.8,0,1,.4
    bitmap coverswitch3,2,-159.0,31.9,-137.7,14.8,0,1,.4

    I changed the logic values so that the center value is zero and the
    upper value is 1

    bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4

    I even tried changing the position of the values

    bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4

    The switch will not follow the logic, what did I do wrong.

    David


  2. #2
    Enrico Schiratti
    Guest

    Re: [LOGIC] Center logic 0 Three position toggle switch

    Hi,

    the sequence has to be 0, 1, 2... so the second example you used

    > bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    > bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    > bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4


    would ne the one to use.

    > The switch will not follow the logic, what did I do wrong.


    I am not sure what you want to do with all of this, I mean I do not get the

    point, the 0, 1, 2 values are anything you want them to be.

    If the clicking is erroneous, then that is obvious: the mouse click at the
    top is 0, the one in the middle is 1 and the one down is 2...

    If you use a second instance of the StbtRuddA switch with the co
    extension...

    element coverswitch3co,-218.8,97.1,StbyRuddA /// moved to the left to
    compare it to the normal one

    .... then I only find the clicking erroneous, but that is normal.

    Ciao

    Enrico



    "David Allen" wrote in message
    news:272127.54034@wb.onvix.com...
    > Hello Enrico
    > I tried to create a switch with a logic 0 in the center, just like a
    > real on - off - on toggle. the stock Toggle switch code from the
    > release 42d is bellow:
    >
    > bitmap coverswitch3,0,-108.0,31.9,-86.7,14.8,0,1,.4
    > bitmap coverswitch3,1,-185.2,31.9,-163.5,14.8,0,1,.4
    > bitmap coverswitch3,2,-159.0,31.9,-137.7,14.8,0,1,.4
    >
    > I changed the logic values so that the center value is zero and the
    > upper value is 1
    >
    > bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    > bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    > bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4
    >
    > I even tried changing the position of the values
    >
    > bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    > bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    > bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4
    >
    > The switch will not follow the logic, what did I do wrong.
    >
    > David
    >



  3. #3
    null null
    Guest

    Re: [LOGIC] Center logic 0 Three position toggle switch

    On Wed, 24 Nov 2004 04:00:41 EST, Enrico
    Schiratti wrote:

    >Hi,
    >
    >the sequence has to be 0, 1, 2... so the second example you used
    >
    >> bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4
    >> bitmap coverswitch3co,1,-108.0,31.9,-86.7,14.8,0,1,.4
    >> bitmap coverswitch3co,2,-159.0,31.9,-137.7,14.8,0,1,.4

    >
    >would ne the one to use.
    >
    >> The switch will not follow the logic, what did I do wrong.

    >
    >I am not sure what you want to do with all of this, I mean I do not get the


    >
    >point, the 0, 1, 2 values are anything you want them to be.


    Since the value of the switch cover open is 0, I was just aranging
    the toggle switches so that the "OFF" text matched logic 0.

    Just matching the bitmaps switches to the real overhead panel
    switches.

    >If the clicking is erroneous, then that is obvious: the mouse click at the


    >top is 0, the one in the middle is 1 and the one down is 2...


    StbyRuddA = 0 would still set it to the up even if the middle graphic
    is called with

    bitmap coverswitch3co,0,-185.2,31.9,-163.5,14.8,0,1,.4

    David


Similar Threads

  1. Old: Need some help with a bit of coding logic.
    By kiek in forum lekseecon Q&A and Discussions
    Replies: 1
    Last Post: 04-16-2010, 09:53 AM
  2. SixPack Logic
    By Potrohkocsonya in forum PMSystems
    Replies: 2
    Last Post: 04-18-2009, 12:41 PM
  3. Airbus logic
    By 3202b in forum PMSystems
    Replies: 3
    Last Post: 02-08-2007, 03:36 PM
  4. [LOGIC] loopvar
    By null null in forum PM General Q & A
    Replies: 1
    Last Post: 12-02-2004, 05:57 AM
  5. [LOGIC] Switch inop + misc
    By null null in forum PM General Q & A
    Replies: 0
    Last Post: 12-01-2004, 03:27 PM