Results 1 to 1 of 1
-
02-27-2015, 11:49 PM #1
- Join Date
- Jan 2007
- Location
- NEW ZEALAND
- Posts
- 908
Opencockpits Modules not being reconised
Hi All,
Just thought I would add some comments to address comments I see come up
repeatedly regarding some modules not able to be installed.
I have just had a case of my USBLCD module that would be recognized on
Desktop pc's running Win 7 and laptops running XP. But it would sometimes
tell me what module I had connected but installation of drivers failed. Other times
that an unknown module had been plugged in. The problem only existed on a late model Laptop.
I know laptops are notorious for problems.
To help others, here is what I did.
1. Did the usual reinstall of win 7 with no luck.
2. Decided that the program cant be corrupt as it ran on other machines.
3. Tried another O/C module and all was well.
4. So I swapped out the chip from another module and presto the fault followed the chip.
5. So I surmised it maybe some dc characteristic.
6. So I sucked out the program and burnt another chip.
I had success so it looks like people who have had new modules that don't work may need to look at a chip replacement.
Hope it maybe of some help in the future.
Les
Embrace the freedom of casual encounters on the best dating app in town! One night stands, no...
Night games. No obligations. One...