A320 FMGS B38

[Beaufort]

Hi

this may not be a problem with admin rights. What video card do you have? is it old? do you have drivers up to date or not?

Regards,
JL

This may be the problem: in this PC are two MSI R5450-MD1GH (Radeon HD 5450 LP HDMI 1024MB DDR3), and you got me not updating the drivers (never change...). I will try that.

[jeehell]

I will maybe have to make a separate EIS for old and new drivers, I had to change a few things in OpenGL graphics display to adapt to these new drivers... Keep me posted if updating drivers does no good.

[OmniAtlas]

----

2. Autobrake disarm with one brake pedal, or speedbrake/spoilers disarm after landing.

I can confirm this logic works correctly. Autobrake will disarm when you also disarm the spoilers.

I will continue my testing with

1. Take off with no FD engaged (early testing indicates A/THR arms in FMGS, contrary to the FCOM)
2. Take off with no V2 MCDU input

[tcane]

Hi JH, Hi Guys,

JH: Have you noticed my last post with SIOC Creator problem? I have a saved config file for the SIOC Creator, but it lost every time my saved options for the F/O MCDU (IDX) and the enabled Ruder and Switchingpanel.

Made a 10 Minutes Video in my HC from a nice flight from EDDH to EDDN with a nice sunset and Jeehell... https://youtu.be/XU-XVQL2550

[Beaufort]

I will maybe have to make a separate EIS for old and new drivers, I had to change a few things in OpenGL graphics display to adapt to these new drivers... Keep me posted if updating drivers does no good.

Hi JL,
I think I got it:
I made the update of the graphics driver (now: 13.251.0.0), but that didn´t result in any change.
Next step I copied only the EIS.exe of B38.5 before the autoupdate into A320FMGS/EIS, and this works. Comparing the two EIS.exe I realised, that the "old" one shows version number 1.0.0.0 and a size of 5,00 MB in Properties/Details, while the "new" one does not show a version number and has a size of only 2,88 MB. Seems the Autoupdate had a problem with downloading EIS.exe.
I deinstalled A320FMGS on the Vista-PC, erased the complete folder, made a new clean install of B38.5. Next step I cancelled the Autoupdate and started the Updater.exe manually with right click and "Execute as Administrator". Now the EIS.exe shows version number 0.38.0.0 product version number 1.0.0.0 size 5,18 MB - and it works!
I assume, it was not a display driver problem, but a problem of Vista to download the EIS.exe with admin rights from the Updater.exe. And that all in spite of UAC off. Windows...
Thanks for your help!
Regards Rainer

[anzabon]

Hi tcane,
very nice video and very nice HC! Do you use Prepar3D or FSX? And what add-ons do you have installed?
Thanks and a nice weekend!

Best regards,
Bon

[tcane]

Hi Bon,
thanks and glad you like!
It´s Prepar3D 2.5 with ORBX Products (GLOBAL BASE, GLOBAL VECTOR, GLOBAL openLC Europe), ASN and GSX... i got also the REX4 Texture Direct with Softclouds but it was there not installed yet. It´s the default Cloud Engine from P3D... Since yesterday I have installed the textures and it's even a bit better.

[jeehell]

Hi JH, Hi Guys,

JH: Have you noticed my last post with SIOC Creator problem? I have a saved config file for the SIOC Creator, but it lost every time my saved options for the F/O MCDU (IDX) and the enabled Ruder and Switchingpanel.

Made a 10 Minutes Video in my HC from a nice flight from EDDH to EDDN with a nice sunset and Jeehell... https://youtu.be/XU-XVQL2550

Hi,

I'll try to have a look soon.

JL

[tcane]

Hi,

I'll try to have a look soon.

JL

Hi,

very nice and no stress! Big thanks for this... and again for your hard work with the Bug fixes and innovations!

Florian

[tcane]

Hi again,
i have again maybe a stupid question.

I would like to assigned the SPD HDG etc. writing surface in the FCU. But i have a little problem because i use LED-BARS for this which are controlled with an Opencockpits display card. Another way is Unfortunately not possible. But the SIOC-Creator supports only the outputs from a Master or Outputcard. Is there a any chance to use it with my Displaycard? Maybe you can add a support for this in your next update?

I have try to write a Script for this and insert to the SIOC Creator. But it seems like this would not work... also there is a problem with the LAT ALT LVL/CH LED... because there is only one Output for this intended?!

Here is the Script that i have written and insertet to the SIOC_Creator:


"Var 1000, name LVLCH_LED, Link IOCARD_DISPLAY, Device 1, Digit 65, Numbers 1 (here i need more Digit´s for this)


Var 1001, name HDG_LED, Link IOCARD_DISPLAY, Device 1, Digit 79, Numbers 1


Var 1002, name TK_LED, Link IOCARD_DISPLAY, Device 1, Digit 64, Numbers 1


Var 1003, name SPD_LED, Link IOCARD_DISPLAY, Device 1, Digit 77, Numbers 1


Var 1004, name MACH_LED, Link IOCARD_DISPLAY, Device 1, Digit 78, Numbers 1


Var 1005, name HDGVS_LED, Link IOCARD_DISPLAY, Device 1, Digit 66, Numbers 1


Var 1006, name TKFPA_LED, Link IOCARD_DISPLAY, Device 1, Digit 67, Numbers 1


Var 1007, name VS_LED, Link IOCARD_DISPLAY, Device 1, Digit 70, Numbers 1


Var 1008, name FPA_LED, Link IOCARD_DISPLAY, Device 1, Digit 71, Numbers 1"


Maybe you JL or somebody can help me with this?
Big thank you in advance!

Regards Florian