Results 1 to 5 of 5
  1. #1
    Michel Vandaele
    Guest

    Activation of the push button for RW or AVC

    Hello,
    I remember it was explained here how you have to proceed to activate the
    push/speak button of RW/AVC on a client pc from the major FS server.

    I think following source code must be set in your wideclient.ini
    [User]
    Log=Errors+
    Actionkeys=Yes
    KeySend1=RWon
    KeySend2=RWoff

    But what about the Wideserver ini . and the fsiupc.ini if for exemple I
    like to use F12 on the FS server for the job to do?

    Ciao

    Michel
    --
    Michel VANDAELE
    Member of the board FSCB
    EBOS2002 Designteam
    My B744 simulator project
    http://users.pandora.be/michel.vandaele/sim1.htm


  2. #2
    Peter Dowson
    Guest

    Activation of the push button for RW or AVC

    This appears to be addressed to me rather than PM support.

    >I think following source code
    >must be set in your
    >wideclient.ini
    > [User]
    > Log=Errors+
    > Actionkeys=Yes
    > KeySend1=RWon
    > KeySend2=RWoff


    Yes, that's okay.

    >But what about the Wideserver
    >ini . and the fsiupc.ini if
    >for exemple I
    >like to use F12 on the FS
    >server for the job to do?


    Don't touch the INI files. Just go to the FS options, find the Keys page and
    press F12. Program it for KeySend with parameter 1 on the press and again
    but parameter 2 on the release -- unless, that is, you don't want to hold
    F12 down but have it toggling, in which case it then gets more complicated
    and would involve editing the INI.

    Most folks like the PTT on a button on their yoke or joystick and it is more
    natural to hold it down to talk. Program button in the same way execpet in
    the Buttons page in FSUIPC options.

    The business of programming this stuff in FSUIPC is mentioned in the WideFS
    documentation and covered in the FSUIPC documentation. The documentation for
    all my modules is supplied with them, in the ZIPs. If you don't have the
    full ZIPs get them from www.schiratti.com/dowson.

    Regards,

    Pete


  3. #3
    Michel Vandaele
    Guest

    Re: Activation of the push button for RW or AVC

    Hi Peter,
    Sorry but I'm so used to this communication platform and I knew you are

    always here too
    Thanks a lot for explanation.
    Ciao
    Michel

    "Peter Dowson" wrote in message
    news:271253.53856@wb.onvix.com...
    > This appears to be addressed to me rather than PM support.
    >
    >>I think following source code
    >>must be set in your
    >>wideclient.ini
    >> [User]
    >> Log=Errors+
    >> Actionkeys=Yes
    >> KeySend1=RWon
    >> KeySend2=RWoff

    >
    > Yes, that's okay.
    >
    >>But what about the Wideserver
    >>ini . and the fsiupc.ini if
    >>for exemple I
    >>like to use F12 on the FS
    >>server for the job to do?

    >
    > Don't touch the INI files. Just go to the FS options, find the Keys page
    > and
    > press F12. Program it for KeySend with parameter 1 on the press and again
    > but parameter 2 on the release -- unless, that is, you don't want to hold
    > F12 down but have it toggling, in which case it then gets more

    complicated
    > and would involve editing the INI.
    >
    > Most folks like the PTT on a button on their yoke or joystick and it is
    > more
    > natural to hold it down to talk. Program button in the same way execpet

    in
    > the Buttons page in FSUIPC options.
    >
    > The business of programming this stuff in FSUIPC is mentioned in the
    > WideFS
    > documentation and covered in the FSUIPC documentation. The documentation
    > for
    > all my modules is supplied with them, in the ZIPs. If you don't have the
    > full ZIPs get them from www.schiratti.com/dowson.
    >
    > Regards,
    >
    > Pete
    >



  4. #4
    Daniel Kuehnel
    Guest

    Activation of the push button for RW or AVC

    Hi Pete,

    I got a similar question concerning the RWon and RWoff... I hhad it all
    working here with AVC on a client and the joystick connected to the server. So I
    could easily use one of the joystick-buttons for transmitting. Now the
    joystick is as well connected to a client, but not the same client that runs
    AVC... is there are chance to archieve that as well that I can use the
    joystick button to activate the transmitter of AVC on another client?

    Thanks for your help!

    Daniel


  5. #5
    Peter Dowson
    Guest

    Activation of the push button for RW or AVC

    On 11/23/2004 7:51:16 AM, Daniel Kuehnel wrote:
    >is
    >there are chance to archieve
    >that as well that I can use
    >the joystick button to
    >activate the transmitter of
    >AVC on another client?


    Yes, if WideClient is running on the PC with the button, its pressing is
    transmitted to the Server. Just program the button in FSUIPC's Buttons page.

    Pete


Similar Threads

  1. How can I make COMM TEST button PUSH to TALK button ???
    By Nick1150 in forum OpenCockpits General Discussion
    Replies: 2
    Last Post: 09-29-2010, 09:50 AM
  2. Push Button Question
    By fletcherj in forum General Builder Questions All Aircraft Types
    Replies: 1
    Last Post: 09-23-2010, 06:39 PM
  3. Start push button
    By renegade in forum General Builder Questions All Aircraft Types
    Replies: 7
    Last Post: 11-11-2008, 12:14 PM
  4. Push Button with LED ???
    By shafian in forum Where to Start Building a Home Cockpit
    Replies: 1
    Last Post: 09-25-2008, 01:25 PM
  5. Push-To-Talk Button
    By flightdeck in forum I/O Interfacing Hardware and Software
    Replies: 11
    Last Post: 08-16-2007, 02:08 AM