Results 1 to 2 of 2
-
11-28-2014, 11:09 PM #1
Stumped on this one, Need ideas please
Below is the code for Airspeed gauge. It is non linear hence the reason for 2 different ranges. It stops at 250knots and never updates above 250 0 to 250 it works greta and is dead on accurate. What am I missing here? hope it is something simple
Thanks,
Rob
Code:Var 1000, name IASservo Var 1001, name IASREAL Var 3301, name IAS, Link IOCP, Offset 3301 // Pilot airspped in Knots { &IASREAL = &IAS / 10000 IF &IASREAL < 60 { &IASservo = 10 } IF &IASREAL > 60 { IF &IASREAL < 252 { CALL &IAS250 } } ELSE { IF &IASREAL > 252 { CALL &IAS300 } } } Var 1002, name IAS250, Link SUBRUTINE { L0 = &IASREAL * 16.617 L1 = L0 - 1054.36 &IASservo = L1 } Var 1003, name IAS300, Link SUBRUTINE { L0 = &IASREAL * 7 L1 = L0 + 1350 &IASservo = L1 }
-
11-30-2014, 12:52 AM #2
Re: Stumped on this one, Need ideas please
Figured it out
Embrace the freedom of casual encounters on the best dating app in town! One night stands, no...
Night games. No obligations. One...