A320 FMGS B35

[Miatanet]

Hi all,
never had disconnecting issues or cabin press errors. I am Running 4 systems on my SIM with Skalarki hw. Did a short flight from eddm to LSZH without any Problems.
For my setup it works fine.
Jl, your software rocks.

[SSO]

Jean Luc,

EDIT: Connections improved.
Yesterdays 1:15 gate-gate flight resulted in 3 mio lines of error and numerous reconnections.
Todays high speed taxi test and rejected takeoff resulted in zero errors and zero reconnections and a good responsiveness from both software MCDU and software OH key presses.
The joystick hardware key assignments still do not however seem to be transfered correctly from the FS PC joysticks to eg. the OH on the secondary PC.
(Axes on the FS PC joystick are received and handled well.)

/Stephen

[buentead]

Hi JL

Thank you for your hard work in trying to get the network issue fixed. Today (23.09.2014 19:00 UTC) I update the software through the updater. Although I don't have 'disconnects', the overhead switches don't work. The Hardwareconnect module receives the correct key pressed (validated with the logging switched on) but the OVHD logic doesn't seem to receive it. The LED's do work, if I 'press' a button on the OVHD logic software.

I run the OVHD logic on a remote PC. If it runs on the FSServer, the module "Hardwareconnect.exe" crashes when I run the Skalarki IOProfiler. However, in B35.1 all was working well with the OVHD logic installed on the remote PC.

Is there anything that I should send you so you have more information?
Adrian

[tcane]

Hi JL and Guys,
today i made an second test flight from EDDN to EDDT and got like yesterday some issues after your new update.
1. I put the ground power in FSX on, but it has to be not recognized in the OVHD. I start the APU via Battery from cold & dark.
2. After finished all preparation for the flight i´d like to start the engines. Turn the Rotary to "Start" and put ENG 2 (1) to "ON". But nothing happens. (Yes APU BLEED was on )
After a short look to the OVHD i saw that all turns and pulls on the real switches nothing happens on your Software OVHD. If i turn the engines on, the OVHD "ON" all works fine. SIOC got the Signals from the Switches and Rotarys... so there works all fine. The same with the Autobrakepanel... LO/ME/HI and ANTI SKID doesn't work.

Regards
Florian

P.s. Oh, ok i´m not the only one with this issue.

[SSO]

For some reason Port 5 (8007) seem to have difficulty connecting properly...
Tried both the default port # 8007 and 8015. I have also seen that the Port 5 has been considered Connected on the secondary PC side, but not on the FS PC side.
First indication of something is not right is that I cant turn on External power via the Add-ons menu of P3D.

[jeehell]

Hi All,

I made another update, hopefully this the One. Should solve the network connections, hardware inputs, and some more.
You can use the online updater or the full package:
http://www.jeehell.org/A320FMGS_B35.6.exe

Regards,
JL

[OmniAtlas]

Thanks for the update, will do more testing tonight. I have updated the website.

If you all have pictures of your setups, interesting screenshots, media, etc which you want featured on the FMGS site please, let me know and I will put it on.

In the mean time, Stay High.

[asessa]

Thanks for the update, will do more testing tonight. I have updated the website.

If you all have pictures of your setups, interesting screenshots, media, etc which you want featured on the FMGS site please, let me know and I will put it on.

In the mean time, Stay High.

Omni, can you insert the link of your site as your signature?
So we can easly access it .

Thanks

[SimStar001]

JL, I did add some note to this BUG: http://www.christophpaulus.com/bugre...iew.php?id=951

still not resolved for me.... same problems here

[buentead]

I successfully completed a 1,5h flight with the update that came after the installation of B35.6. On my side, all looks good so far
Thanks JL
Adrian