----- Original Message -----
From: "Gilles DAZZAN"
Newsgroups: magenta.support
Sent: Thursday, November 11, 2004 8:47 PM
Subject: GA Thrust

> Hi again!
> I tried a go around and noticed when pushing N1 on cpflight hardware
> the GA Mode is not initialized. Instead I get climb mode.
> This is not correct, GA mode should be initialized.
> I do not use the cp driver.
> The cphardware is connected to mcp389software via the ini file.
> This issue is important to me for training GA.
> Many thanks