A320 FMGS B31

[Miatanet]

Hi there
everything works fine, but I do not hear any sound from the FSX, nor the sounds of APU or engines. Has someone an idea? I already checked the voice output and on Windows I hear the sounds...

Best
Stefan

[jeehell]

solved....

JL

[ToTom]

In
FSX\SimObjects\Airplanes\a320 FMGS JH Project Airbus A320-214\sound
is a file: sound.cfg.
there should be:
alias=Airbus_A321\sound
or download this:
https://www.dropbox.com/s/3z1duz6w8shvnlg/sound.zip

[Miatanet]

Thank you ToTom,

the new installation has overwritten my sound.cfg, so I renamed it and now it works .

Best
Stefan

[romeow]

I have noticed that the PA Airbus with the .air file dated 02.04.2014 is now rolling along the LOC ( ILS/APPR mode). GS is OK.

And

The EFIS options WPT/VORD/NDB/ARPT are not displayed on ND reliably. Either they all work or none.

Regards
René

PS I haven't tested the new update yet!

[jeehell]

Hi Peiman,

RPLL RWY06 IPA2A.IPATA

Update from today should correct that behaviour.

Regards,
JL

[OmniAtlas]

Hi JL -- airport YBCG, when selecting RNAV 16 on the MCDU under the arrivals page, runway doesn't display on the ND, only the last nav point prior to landing. I have to select RNA16 twice (no STARS) before it displays correctly.

Will test again to see if this is reproducible, cheers.

Thanks again for all the updates (its holiday season, please take a long break!)

[Peiman]

Hi Peiman,


Update from today should correct that behaviour.

Regards,
JL

Dear Jeehell,


Thanks for the update,
The AP issue has been solved.
I have noticed some minor issues which are not really important but it might help FMGS be more realistic.


1- CVR TEST button on overhead panel does not sound BEEP! when it is pressed.

2- On RCDR panel when flight crew turn on the GND CTL pb as part of cockpit preparation, The button has to be switched off automatically when the A/C is airborne.

3- During cockpit preparation and battery check, SD does not bring up ELEC page automatically when I turn the BAT 1 and 2 OFF.

4- In flight if I turn off PACK 1 and/or 2, no warning triggers on EWD.

5- The CRS of ILS cannot be modified in RAD NAV page of MCDU in case of back course take off for correct indication of Ground Roll Guidance Command Bar.

6- There is still some problems with Flight Plan on ND and actual flight trajectory. (see pictures bellow) the airplane symbol on ND always drifts from flight plan especially during holding and tight interception. It seems the airplane does not try to correct itself with flight plan except for straight flight path.

7- I have noticed that maximum Bank Angel commanded by FD on PFD does not exceed more than 25 degs when AP is on. While I have seen in real A320 that the maximum Bank Angel with AP on, is 30 degs.

8- When planning a route by using MCDU F-PLN >> AIRWAYS >> VIA[ ] function followed by selecting a desire STAR, The common waypoints between the airway's segment and STAR should not be duplicated on F-PLN page.

By the way I could not find any button to set and control THS.

Thanks for your unmatched software.

[tcane]

solved....

JL

Works now thanks!

Got another question:
I use TOPCAT as my calculation tool and Loadsheet exporter.
But i got a little issue with this if i use the A321 FMGS JH PROJEKT AIRBUS A321-211 Air France Model.
Everytime if l like to export it to fsx i got the following error message:
"There is a differnece in the Dry Operation Weight between TOPCAT and FSX. You might have loaded the wrong aircraft type in FSX"
When i klick "continue" TOPCAT Exports all but after checking payload data i got this error:
"Can not update payload and Fuel, Manuallly set Payload to 0 kg and Fuel quantity to 0 kg."
I didn´t find a A321 Model in Topcat.
How can i fix this?

Looking foward to your help guys... and sorry if this the wrong thread!

Regards
Florian

[ToTom]

I didn´t find a A321 Model in Topcat.
How can i fix this?

http://www.topcatsim.com/forum/index.php?topic=1277.0

I can prepare a profile for the A319/A312 but using a performance for the A320.